Hydraulic plate shears

JORDI CH 3100 4

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW Hfjdpfx Acot Ucgasbjg - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Hfsdpsv Tk Exofx Acbsg Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: used, Year of construction: 1999, sheet width 3000 mm plate thickness 3 mm 3 support arms 1 angle stop pneumatic hold-down device Hodpfx Acjr Ngtijbofg Backgauge to be operated by hand

Condition: excellent (used), 3-phase direct current spot welding machine DALEX type PMS 11-4 G 3 Rated power at 50 % ED: 96 kVA Sec. short-circuit current: 44.5 kA Hfodpfshmvawex Acbjg Sec. open-circuit voltage: 4.72 V Electrode force: 100-600 daN arm reach: 550 mm with add-on control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 weight: 740 kg

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Hsdpovc Amtofx Acbsfg Equipment: Drain with rollers for clippings 2x protective grid *

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm plate thickness . mm 8mm distance between columns . mm Hedpfxsq Dta Is Acbjfg

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, Equipment: safety light barrier, Hydraulic Shear Hfodpfx Acewy Nhqjbjg Brand: Casanova Model: VC-26 Year: 1995 Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Condition: good (used), Year of construction: 1997, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Hodpfxstqfvys Acbjfg

Condition: used, Year of construction: 2000, operating hours: 10,889 h, Equipment: - Year of manufacture: 2000 - 9,000 kg weight - 63 kW Hsdpfx Aouqgwuecbsfg - Cabin - Driver’s air suspension seat - Rehnen pallet fork FEM 38, year 2018, with 4,100 kg lifting capacity - German machine - Immediately operational Since 1972, your reliable partner for all things automotive/commercial vehicles, located in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock – including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special favorable rates. If interested, we are pleased to prepare a customized offer! Trade-ins of your commercial vehicle/construction equipment are welcome. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Please note, our offer generally does NOT include a new TÜV certificate. Delivery of your "new" commercial vehicle is possible through our external partners at an additional cost. The details provided in advertisements, online listings, price tags, and photos are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed features may need to be verified separately. Subject to prior sale and errors.

Condition: ready for operation (used), working width: 3000 mm metal sheet thickness: 4 mm throat: 100 mm rear stop: 500 mm Hedpfx Aceh D E Hhebofg power: 380 V, 7,5 kW space needed: 3400 x 1600 x 1700 mm weight: 4500 kg