Josting EFS 2600 veneer shears

Josting EFS 2600

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Rsdpjwmxmvsfx Aazon Manually adjustable with scale; Optionally available with digital display or motorized adjustment Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: good (used), Year of construction: 1989, Shredder +press +conveyor belt+silo complete Redpfx Aer Dvdkeazon

Condition: refurbished (used), Vecoplan drum chipper type VTH-55/14/2 refurbished | reconditioned with new bearings ( spherical roller bearings), checked rotor and new drive motor New cutting blades and counter blades Feed width/height: 550 x 140 mm Rotor diameter: 500 mm Feed rollers: 2 pieces Screen perforation: 55 x 55 mm Drive power: 45.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,200 kg (approx. 4,000 kg incl. steel construction) Rsdpfxoxcb I Ee Aazsn Year of manufacture: 1981 / overhauled in 2007 Machine colour: RAL 6011 Reseda green Chipping knife and counter knife, new Incl. 6 chipping knives, new Incl. steel substructure H = 700 mm without electrical installation Drum chipper | Wood chipper | Chipper | chipping machine | wood chipping machine | shredder | wood shredder

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Rodpfxsumrgae Aazen Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: used, Year of construction: 2020, functionality: fully functional, Compact edgebanding machine of the EDGETEQ series for the small handicraft business with possibility of automatisation of the units. Basic equipment (2020): Control easyTouch Joint milling unit Gluing unit + 1 spare glue pot Cutting saw unit, double motor, pneu. adjustable Milling unit with manual adjust on flush, fibre, radius Form milling unit/Edgerounding unit Profile scraper, pneu. adjustable Rjdpfsw Tcpmex Aazon Flat scraper Buffing unit Technical data (2020): Machine length [mm]: 4.153 Workpiece width workpiece thickness 8 - 22 [mm]: 70 workpiece thickness 23 - 50 [mm]: 120 workpiece thickness 41 - 60 [mm]: 150 Workpiece thickness [mm]: 8 - 50 (opt. 8 - 60) Edge thickness [mm]: 0,4 - 3 Feed [m/min]: 11

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Rodpfx Asw I R Rnjazen Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: refurbished (used), Year of construction: 1991, HAAS drum chipper type HTH-160x510 L2WV completely refurbished / reconditioned with new bearings (spherical roller bearings) and tested rotor New knives and counter knives Feed width/height: 510 x 160 mm Rotor diameter: 500 mm Screen perforation: 60 x 60 mm Drive power: 45.0 kW Feed motors: 2 x 2.2 kW Weight: approx. 3,000 kg Machine colour: RAL 6011 Reseda green Without electrical installation incl. control cabinet with all installations relating to the system in accordance with CE standard. Operation on the cabinet door, without cable 1 unit Vibrating conveyor type HVSR 500x8000 completely refurbished / reconditioned Rjdsw H Eqzepfx Aazjn with new bearings (spherical roller bearings) and tested oscillating elements Chute width: approx. 500 mm Chute length: approx. 8,000 mm Chute height: approx. 170 mm Wall thickness: approx. 5 mm Feed height feed: approx. 450 mm Total height feed: approx. 770 mm Discharge height discharge: approx. 950 mm Total height discharge: approx. 1,120 mm Drive power: approx. 4.0 kW Weight: approx. 1,400 kg Machine colour: RAL 6011 Reseda green Rising vibrating chute (approx. 4.5 °) incl. screening zone 15 x 15 mm, L = 500 mm incl. metal-free zone made of wood, new (L = 1,500 mm) incl. metal detector, second-hand without electrical installation 1 unit HAAS scraper chain conveyor type HKF-490x11,000 completely refurbished / reconditioned with new bearings, tested conveyor chain and flights Width: approx. 500 mm (600 mm) Length: approx. 11,000 mm Trough height: approx. 570 mm With bottom curve: 45° Total height: approx. 6,700 mm Drive power: approx. 5.5 kW without electrical installation

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 19,951 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: AMADA, bending force (max.): 170 t, working width: 3,000 mm, stroke length: 200 mm, number of axes: 6, type of crowning: CNC-controlled, overall weight: 11,600 kg, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, The Amada HFE 170-3 is a hydraulic press brake with a 170-ton bending capacity and approximately 3 m working length. Designed for precision and reliability, it is suitable for industrial sheet metal bending applications and features robust European construction. The press brake is under power, tools are available with machine. Press brake is equipped with Y1/Y2/X/R/Z1/Z2 axis. Rjdsx Upt Nepfx Aazsn

Condition: excellent (used), Veneer Guillotine Casati Macchine CIM31 Working length: 3,100 mm Max working height: 45 mm Manual fence adjustment Redpfx Aexu E Rueazjn Maximum cutting width: 500 mm Safety light barriers

Condition: used, Twin-shaft shredder Rsdpfxeycv Uho Aazen Manufacturer: Fransson Weight: 1500 kg Mouth width: 750 mm x 680 mm With sieve Mesh diameter 50 mm Capacity: from 20-50 m3 per hour Equipment after repai