Keyence measuring system

Keyence IM-8010

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, functionality: fully functional, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub-Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools at Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool System Turning tools (12x12x130): 5 Tool holder/parting-off blade (16x12x130): 1 Drilling tools (front): min. 3 Drilling tools (rear): 5 Tool holders, quills (diameter): 19.05 mm Giedpfjxf Hqqex Aiaeu Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Collet main/sub-spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specification Required space (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Power supply: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section), - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub-spindle - Main spindle with C-axis - Sub-spindle with C-axis - 3x powered tool rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 bar feeder - Option for long parts - Spindle flushing (Scherzinger pump)

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Gsdpoxdalfsfx Aiaoiu

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a measuring system from Keyence, type XM- C1000 The measuring system is something special, as the points to be measured are scanned by hand Very user-friendly and intuitive system. Compact and easy to maintain Control unit and PC XM-1600 are included in the offer Also Gjdpfx Ajrq Ebisiasiu Measuring probe, exchangeable probes, alignment station, various clamping devices Clamping vice Mouse Touch probe Operating instructions On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. Gijdpfx Aextxk Seiaou You can find further milling machines from well-known manufacturers on our website.

Condition: used, Field of view on the objective at 50 x: 11.2 x 9.2 mm Field of view on the objective at 100 x: 5.6 x 4.6 mm Giodpob Nxl Ijfx Aiasu Projection area: 560 x 460 mm Objective stage size: 230 x 165 mm diameter of the glass table: 80 mm Weight approx.: 230 kg Space requirement: 1030 x 780 x 1800 mm

Year of construction: 2023, condition: ready for operation (used), This KEYENCE IM-8020 optical measurement machine was manufactured in 2023. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-8020 optical measurement machine. Contact us for more information. Additional information • Measuring head with 200 × 200 mm measuring field • Multi-angle illumination with photoelectric sensor • Digital measuring projector • Control unit • AC power cable • Mouse and keyboard • Rotary unit (for IM-8000) Gsdpfxox D Dl No Aiaeiu • Glass plates • Software • Clamping device • Glass scale • Barcode scanner • Lighting • StyliOptional Accessories: • Test probe sets: 80 pcs, range 0.3–0.99 mm • Test probe sets with handles: 350 pcs, range 0.4–4 mm • Gauge sets: 800 pcs, range 4–12 mm • Limit plug gauges: 265 pcs, range 1–43 mm • Setting rings: 50 pcs, range 0.6–47 mm • Thread plug gauges: 170 pcs, range M1–M24 and various inch threads • Thread ring gauges: 265 pcs, range M1–M63 and various inch threads • Micrometers: 70 pcs, range 0–150 mm (analog and digital)Optional: Comprehensive package of measuring instruments

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 320 mm, spindle speed (min.): 8,000 rpm, bar passage: 32 mm, Machining Data Maximum bar capacity: 32 mm Maximum turning length: 320 mm Maximum drill diameter (front): 12 mm Maximum tapping size (front): M12 Main spindle speed: up to 8,000 rpm Sub spindle speed: up to 8,000 rpm Number of tools: 25 to 27 Dimensions & Weight Dimensions (W x D x H): 2,860 mm x 1,465 mm x 1,900 mm Weight: 4,300 kg 10-position turret Gijdexb R R Hopfx Aiasu Rotating tools for complex machining operations FMB Turbo 3-36

Condition: good (used), overall weight: 1,200 kg, Machine equipment as required available for an additional charge – almost anything is possible. We specialize in retrofitting Jungner machines. Gijdstwpyyjpfx Aiaju

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm stroke 700 mm Gisdovuukbepfx Aiaeu distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Gedpfx Aijxmurrjaeiu