3 rolls asymmetrical bending

KK-Industries CY 75-12/1.5 with motor

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t Lrjdpfx Aocblc Soqvsl

Year of construction: 2024, condition: new, Bending capacity: 6 mm Lsdpfx Aeftdh Ijqvorl Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: ready for operation (used), A Winkel + Dünnebier 26 FF envelope printing machine is available. On-site inspection is possible. Ljdstq Hbfepfx Aqverl

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails Ledpfx Aqopiarnevjrl The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Year of construction: 2026, condition: new, functionality: fully functional, SPIN DRYER VSD500 An advanced vegetable and lettuce spin dryer with an ergonomic design and counter rotating centrifuge cycle. This machine efficiently dries lettuce, vegetables, fruits, and more, preserving quality and extending shelf life. The VSD500 features an open design for easy cleaning, with no screw-related crevices to trap dirt, and a convenient rear lid locking mechanism. Its centrifuge cycle alternates rotation midway to enhance product loosening and ensures efficient water drainage through a pin-type pick-up system that adjusts the basket's speed. Upgrade your kitchen with the VSD500 for unmatched efficiency and excellence in food drying. Lsdjixldvopfx Aqvsrl KEY BENEFITS Efficient Drying Performance: The VSD500 spin dryer features an ergonomic design and counter-rotating centrifuge cycle, ensuring efficient drying of lettuce, vegetables, fruits, and more. Quality Preservation: This advanced spin dryer preserves the quality of produce, extending shelf life and maintaining freshness. Easy Cleaning: The open design of the centrifuge area allows for effortless access, making cleaning and maintenance tasks swift and simple. Hygienic Design: The absence of screw-related crevices in the spinning area eliminates dirt traps, ensuring a more hygienic operation. Convenient Lid-Locking Mechanism: The lid-locking mechanism is conveniently located at the rear of the machine housing, enhancing ease of use. Improved Water Drainage and Rotation: The centrifuge cycle alternates rotation halfway to improve product loosening, and the The pin-type pick-up of the rotating basket adjusts speed efficiently while ensuring effective water drainage.

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm stroke 400 mm Lrsdpfxolp U Dps Aqvel power capacity 22 kW dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t

Condition: new, Fastech 3-roll round bending machine FRM 1250 x 90 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 3,0 mm max. sheet thickness 2,5 mm bending roll length 1250 mm roll diameter 90 mm smallest bending diameter 130mm weight 500 kg dimension L-W-H 1950 x 900 x 1130 mm Motor:1.1 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement Lsdjhzq Dqepfx Aqvsrl self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 3 mm, - Capacity 1070 x 3 mm - Roll diameter 90 mm - Electrically adjustable trailing roller Lrjdpsi E Tzqjfx Aqvjl - Digital display - Hardened rollers - Possibility for conical rolling - Rotatable upper roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar Lredexaa Urspfx Aqvsl total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. Lrjdpfxefg E Hms Aqvjl The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.