3 rolls asymmetrical bending

KK-Industries CYL 120-12/4.5

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning Iiodpfx Aoydpxvjgyeh - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Iisdpfxew Imq Rj Agyoh

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. Iodpjxdiigefx Agyoih X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe - Tool probe - Rigid tapping - Electronic handwheel - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec Iodpfxsra Rrhs Agysih work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar Iedpex Ew Dqjfx Agyeih - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Iodpfxsihp U Ds Agysih Machine weight: 2000 kg Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Accessories: Milling head with quill Table: 1000 x 470 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour Iiedjy St U Sopfx Agyeh • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Condition: ready for operation (used), Year of construction: 1988, SARATOV 5C280P Spiral Bevel Gear Grinding Machine - 2 machines Max. gear diameter: 800 mm Max. module: 16 Max. gear ring width: 125 mm Number of teeth: 5-150 Spindle speed range: 20-125 rpm Main motor power: 7.5 kW Overall dimensions (LxWxH): 3170x2180x2200 mm Weight: 15 t Video of the machine in operation available! SARATOV 5C276 Straight Bevel Gear Grinding Machine Ijdpfx Ageum Ez Reysih Module, mm: 10 Max. gear wheel diameter, mm: 500 Max. gear wheel cone distance, mm: 250 Max. gear ring width, mm: 80 Min. angle of dividing cone (pitch), degrees: 5 Number of wheel teeth: 10 – 150 Distance between spindle and machine center, mm: – max. (stock angle 5 degrees) 375 mm; – min. (stock angle 90 degrees) 75 mm Stroke, mm: 100 Slider double stroke, spm: 48 – 400 Motor capacity, kW: 4.0 Machine weight, kg: 8750

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,013 h, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, table length: 1,100 mm, table width: 560 mm, controller model: 840d SL ShopMill Operate, rotational speed (max.): 12,000 rpm, operating hours of spindle: 203 h, For sale is a machining center of the brand Spinner and the type P3-620 Ijdpfx Agot Sftwjysih The machine has an internal 2 compartment pallet changer, which makes it possible to set up during the work process. Particularly noteworthy are the 203 spindle hours and the very good condition of the machine Technical data: Year of construction: 2011 Control: Siemens 840d-SL ShopMill Operate Spindle speed: 12,000 1/min Spindle holder: SK 40 Table dimensions: 1,100*560 mm Travel X 620 mm Travel Y: 520 mm Z travel: 460 mm Tool changer: 32 pockets (chain) Tool changer head: double arm Pallet changer: 2-fold (180 °) Machine lighting, Chip conveyor in the milling area, Chip conveyor scraper belt with coolant device Belt filter system with IKZ 40 bar Hydraulic oil cooling system, Rotary feed-through in the table On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 20 [kW] - Spindle speeds : 24000 [rpm] - Number of spindle hours : 4877 [h] LINEAR AXES - Travels on X/Y/Z axes : 700/420/380 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 25 - Tool exchange time : 0.9 [sec] TABLE - Table dimensions : 840/420 [mm] - Maximum weight upon table : 400 [kg] - Distance table / spindle nose (min./max.) : 200-580 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 16 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1650/2950 [mm] - Machine height : 2550 [mm] - Machine weight : 3400 [kg] MACHINE HOURS - Number of hours under power : 14493 [h] - Number of working hours : 5307 [h] EQUIPMENT - CNC : Siemens 840D SL - Interface : Ethernet / RS232 / USB / PCMCIA Iijdpfx Agsxcqadoysh - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor - Tool probe : Renishaw OTS - Workpiece probe : Renishaw OMP40-2 - Electric transformer