Cylinder grinding machine

Laguna 1632 SuperMax

Condition: used, drilling capacity steel/GG: 15 mm Dkodpfevxpp Hjx Akgen spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Dsdpepgkmwjfx Akgokn Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, functionality: fully functional, total width: 620 mm, total length: 800 mm, total height: 1,170 mm, Multiple Xerox AltaLink C8130 / C8135 / C8145 / C8155 Series machines available! Lightly used units with low page counts, fully operational. - Supports formats from A6 to A3 - Max paper weight: approx. 300 g/m² - Automatic document feeder: single-pass duplex scanner Dsdpfxey Hua Ee Akgjkn - Suitable for up to 300,000 prints per month

Condition: new, Year of construction: 2024, Working width: 520 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2300 mm Dressing fence angle adjustable: yes Folding up the dressing tables: pneumatic Maximum passage thickness of thickness planer: 250 mm Dkedjvadxlspfx Akgsn Thicknessing table height adjustment: electric with position control Planer thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Pull-out roller: Rubber Pressure bar: jointed Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Suction connection: 160mm Machine length: 2300 mm Machine width: 1100 mm weight: 980

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: CNCK66748, Toshiba ES-3015AC This is a Toshiba ES-3015AC photocopier in very good condition, offering high copy quality and a low page count. Counter: 93,000 total copies (including 32K black & white copies and 19K + 42K low color copies) Dodpotxnkgofx Akgskn Options: PCL / PS / Scan / Finisher / Large Capacity / Paper feed unit with 2 cassettes Technical data: Power supply: 220–240 V, 50–60 Hz CM SOLUTIONS is now one of the leading French and European companies in the purchase, sale, and refurbishment of used office equipment. With transparency, expertise, and ethical trading at the core of our operations, we provide our customers with high-performance products at competitive prices. Why do our clients choose CM Solutions? - 28 years of international experience in over 50 countries - 20 machine brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta, and more - An extensive stock of 2,000 copiers available immediately - A team of qualified technicians Please do not hesitate to contact us for more information.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Dodpfx Ajtwb U Aekgjkn Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: used, Year of construction: 1967, grinding length 1650 mm grinding width 700 mm workpiece height 600 mm table surface area 1500 x 500 mm table speeds 0 - 20 m/min cross feed autom. 0 - 20 mm/Hub grinding spindle speed 2000 U/min grinding wheel diameter 300 mm total power requirement 19 kW weight of the machine ca. 5 t dimensions of machine L x W x H 5,92 x 3,12 x 2,65 m Accessories: 2 magnetic plates, each 750 x 600 mm; Dkodott S Uaopfx Akgon grinding wheel with flange, various grinding wheels and flanges separate, wet grinding attachment

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 320 mm, total height: 2,245 mm, total width: 1,340 mm, total length: 1,140 mm, table width: 240 mm, table length: 1,000 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, rotational speed (min.): 100 rpm, overall weight: 1,000 kg, working range: 650 mm, input voltage: 400 V, distance table to spindle center: 370 mm, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Drilling capacity in steel ----- 50 mm Milling capacity in steel ----- 25 mm Shell milling capacity ----- 100 mm Longitudinal travel (X) ----- 585 mm Cross travel (Y) ----- 185 mm Vertical travel (Z) ----- 320 mm Horizontal motor ----- 1.5 KW Vertical motor ----- 2.2 KW Horizontal milling spindle ----- 60 ~ 1350 rpm (9) Vertical milling spindle ----- stepless 100-600 / 350-2000 rpm Spindle taper ----- ISO 40 Table ----- 1000 x 240 mm Weight ----- 1000 KG INCLUDES * DELTA frequency inverter * 3-axis digital readout SINO * Automatic longitudinal and cross feed for the work table Dkedpfsga Twfex Akgon * LED lighting * Cooling system * Premium control cabinet * Tiltable milling head left/right 0 - 45 degrees * Rotatable work table * Various holders in case

Year of construction: 1995, condition: good (used), Offer 22054 Technical data: - Drilling capacity - in steel 15 mm - in aluminum 18 mm - Drilling spindle holder MK 2 - drilling depth 70 mm - throat spindle / column 180 mm - drilling spindle speed 80 - 4000 rpm - drive 400 V 0,45 / 0,75 kW - height adjustable drilling table 280 x 240 mm - distance drilling spindle / table approx. 360 mm - distance drilling spindle / base plate approx. 410 mm - space requirement approx. W 280 x H 1700 x D 600 mm - weight approx. 85 kg Dkedpskt N Nlofx Akgjn - with : - quick-action drill chuck 1 - 13 mm - machine vice - div. burned HSS drill bits 5 - 15 mm

Condition: new, WM5150 ROGI bed milling machine 400V-3F Dodpfxega T Dwe Akgskn Motor ----- 2.4 KW Speed range vertical ----- 94 ~ 2256 rpm Spindle mounting ----- ISO 40 Table ----- 1220 x 360 mm Pinhole stroke ----- 180 mm Pinhole feed ----- 0,1 / 0,15 / 0,3 mm/rev Longitudinal displacement (x) ----- 600 mm Lateral displacement (y) ----- 360 mm Height displacement (z) ----- 500 mm Unload ----- 370 mm Spindle head swivel range ----- -45 to +45 Distance spindle / table ----- 110 - 610 mm Feed range along / across ----- (8) 24 - 720 mm/min Weight ----- 1800 KG INCLUDED * 3-axis digital readout brand SINO * Automatic feeding of work table X,Y * Automatic spindle feeding * LED lighting * Cooling system * Luxury control box * Box with various tools