faceplate diameter: 785 mm
revolution per minute: 4,5 - 180 (Planscheibe) U/min
Gcvrfr7
Speed of boring spindles: 4,5 - 900 U/min.
tool taper: SK50
weight of the machine ca.: 3,7 t
space requirements of the machine approx.: 3,6x1,3x1,6 m
spare part for a table type Boring and Milling Machine WMW BFT 130
with with headstock incomplete (as it can be seen on the picture!!)
- diameter facing of a flange:0-1400mm
- diameter for drilling: max. 800mm
- diameter at face turning: 0-1400mm
- spindle diame...
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter
27f0o2qyw
-Adapter
-Recording: MK5
-Tool holder: MK4
-Number: 41x recordings available
-Price: per piece
-Weight: 1 kg/piece
Pallet changer with 2 pallets
Pallet 1: 2000x1200 mm
pallet 2: 1250x1250 mm
change table with servo motor for V- and B-axis incl. controller cards
pallet 1 dimensions: 2000x1800x1000 mm
Ytrbyw
pallet 2 dimensions: 1700x1500x850 mm
total shuttle table: 3000x17000x900 mm
4 pcs. rope pulleys for counter weight of a FB 225
Jh00pxmv
FLOORPLATE - 2000x10000x370- 2 pieces - dimensions of 1 piece: 2000x10000x370 mm - used condition as showed on photos
Ikd9mpuw3
as good as new Sandvik collets incl. holders suitable for deep hole drilling machines
O2jml
quantity: 22 collets
diameter: 20mm 3 pcs./ diameter 30mm 6 pcs./ diameter 35mm 4 pcs./ diameter 50mm 4 pcs./ diameter 55mm 5 pcs.
table length 2000 mm
table width 1800 mm
table load 12,5 t
total power requirement 10 kW
weight of the machine ca. 7,5 t
dimensions of the machine ca. m
Table size approx.2,000 x 1,800mm
Max. weight of workpiece, approx.12,500kg
Table travel, longitudinal1,250mm
Table height above floor920mm
Longitudinal feed0.63 - 2,000mm/min
Turning feed, with Ø 1,000 mm1 - 3,150mm/min
Longitudinal quick feed2,000mm/min
Rcjypaqlc
Turning quick feed, with Ø 1,000 mm3,150mm/min
Weight of machine7,500kg
Ex...
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter
-Adapter
Izecnmp
-Recording: MK5
-Tool holder: MK3
-Number: 36x recordings available
-Price: per piece
-Total length: mm
-Weight: 1.1 kg/piece
Table size 2000x1600 mm
Buurvrjbrn
V-,B-axis with servo motor and controller card
table dimensions 4200x2250x750 mm
diameter 10-60 mm
length 100-500 mm
tool adaptor MK 1-5
Benjax82zg
Used and unused MK Drills in different diameters and length available!
prices as following:
Ø 10-19 mm - 30
Ø 20-29 mm - 40
Ø 30-40 mm - 90
Ø 41-60 mm - 120
special length + 30 - Used ones - 20%
Universal facing and boring head Wohlhaupter
Mod: UPA 6 - S 7 / 160
O87ex
tool holder - ISO 50
max. speeds up to 600 rpm
as good as new
weight - 65 kg
1
Twist Drill DIN345 Machine Drill MK2 and MK3-receptacle 9-piece Habusch
sizes 14,5 mm / 16 mm / 18 mm / 20 mm / 22 mm / 24 mm / 26 mm / 28 mm / 30 mm
Description.
Twist drill
Y8ggpasj
DIN345
9-piece
14,5 - 22 mm drill MK 2
24 - 30 mm drill MK 3
Technical data
Weight: 2,5 kg
More types
Corpxv9
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter
-Adapter: for the cone in the chuck holder of a lathe
-Outer mount: MK10 (Ø 100 mm to Ø 92 mm)
-Take inside: tool MK6
-Total length: 190/180 mm
Bh08i9pma
-2x recordings: available
-Price: per piece
-Weight: 6.5 kg/piece
Table size 2000x1600 mm
Buurhhqtp7
V-,B-axis with servo motor and controller card
Overall dimensions 4200x2250x750 mm
4 pcs. rope pulleys for counter weight of a FB 225
Qn0vdyu
108134
Solid drill
Type Saradrill SR
Make Showa Japan
Type Super Drill
diameter range 100 - 120 mm
Accessories :
1 center drill
2 sets of knives diameter 120 mm
Ei7dbzigq
2 sets of knives diameter 110 - 120 mm
6 sets of knives diameter 100 - 110 mm
Shaft length or drilling depth 240 mm
Mounting MK 4
Sk 50 tool holders from various manufacturers
Fbsmq2jw8
1 used boring mill counter holder
for boring mill
Bskavcas0u
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter
-Adapter
-Recording: MK5
-Tool holder: MK2
-Number: 51x recordings available
-Price: per piece
-Total length: mm
Mtpbio
-Weight: 1.5 kg/piece
More locker Elbe ear head Fabr. SAWAS type SBS Gr. II.
Fabr.# 10957 year 1995
Technical data:
Number of the plugs 6
occupies 4
Distance of the spindles 65 mm
Position of the screws m line
Gear ratio 1: 2
Dyhckxt
External dimensions approx. 400 x 300 x 350 mm
with
-Adapter flange for Alzmetall SB machines
used
diameter 4-29 mm
length 50-300 mm
tool adaptor MK
- different manufacturer, sizes and types available.
price: 1 Euro per mm diameter.
8 H7-->8 Euro/piece
12 H7 -->12 Euro/piece
Btttqjg7ih
.
29 H9 -->29 Euro/piece
Vertical / Horizontal
Of9id2qj
Center height 100mm
3 jaw chuck 140mm
Tailstock
MARCELS MASCHINEN CH
1 used HURON table milling unit
for clamping on a boring mill table
Bhzvcwf
spindle mounting ISO-SK 40
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter
3q8urrsuc
-Adapter for the cone in the chuck holder of a lathe
-Outer mount: MK5
-Number: 9x recordings available
-4x mounting: inside tool MK4
-5x holder: inside tool MK3
-Price: per piece
-Total length: mm
-Weight: approx. 0.6 kg/piece
1 post = 44 spindle carrier Fabr. BOLEY type W and U type
1 post = 32 spindle Fabr. BOLEY type W and U type
Beqq3aglbv
used, in good condition
for the total of all parts used for Boley VG / VG 16.
throat 0 mm
tool adaptor 0
power requirement 0 kW
Different brands and sizes available!!
M5 Titex 16,0x5,3x4,2
Befuq7rm
M6 Titex 16,0x6,4x5,0
M8 Titex 17,0x8,4x6,8
M10 Titex 18,0x10,5x8,5
M12 Titex 22,0x13,0x10,2
M16 Volz 27,0x17,0x14,0
M20 Volz 36,0x21,0x18,5
M24 Volz 40,0x25,0x21,0
M24-1 Gühring 40,0x25,0x21,0
M30 Gühring 50,0x31,0x26,2
M36 Gühring 62,0x37,0x32,0
M36-1 Gühring 62,0x37,0x32,0
M42 Gühring 74,0x43,0x37,5
M42-1 Gühring 74,0x43,0x37,5
M48 Gühring 86,0x72,3x43
Price upon reque...
2 identical clamping brackets
800x1000x800WxHxD
1500€ for both
3lj97qu
Recording taper: MK 3
4 spindles, individually adjustable
Bhn8o3yk
Drilling capacity per spindle in St / GG: 11/12 mm
Tapping St / GG: M 8 / M 10
Max. Spindle speed: 2500 rpm
minute Spindle distance: 47 mm
Max. Spindle distance: 145 mm
Diameter of the drill body: 200 mm
Height: 200 mm
7 Aschen CNC control cabinet make SCHARMANN
Bexgnvxwwh
SIEMENS 8 MF Year 1984 Complete.
(If required with all motors and control panel available)
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert
-Take shaft: MK3
-9x: sleeve MT1
-7x: sleeve MT2
-4x: sleeve MT3
-Thread recordings: 3
Bbx0sob8n7
-Weight: 16.8 kg
Spindle bearing
Ncxdj
Brand Union
Working RADIUS 600 mm
Spindle diameter 130 mm
4 pcs. rope pulleys for counter weight of a FB 225
Benir2ecpu
Keyless drill chuck 1-16mm
B 16 mounting
Other chucks on request
Qqmqel39
for spindle taper: MK 3
Caysndnk
Drill-Ø in steel at 0.09 mm feed: 6 mm
Thread cutting: M 4 / M 6
min. Spindle distance: 20 mm
max. Spindle distance: 107 mm
case body: 65 x 130 mm
case length: 150 mm
Plan support for Union drilling works of the series type:
BFT80 / BFT90 / BFT102
RPM depending on engine type: 4-250 U/min-1
Maximum travel: 160 mm
Also available:
Swing arm / mount for attachment to the stand
Steel holder
Ytoy7prrc
Face drivers, face drivers, face drivers
-CoA small range
-Clamping circle Ø: 12-50 mm
-Range of rotation: 13-100 mm
-Delivery in: wooden box
-Content: 1 basic body, 4 driver blades
Clamping circuit Ø: 12; 20; 32; 50 mm
Gvrsbo
-1 center point Ø: A = 6 12 mm.
-Recording: MK4
-Number: 1x face driver available
-Price: per piece
-Weight: 3.7 kg
Trapezoidal taps
Diameter 40 mm
Pitch 1/5 inch
Bcsfb7pb30
For sale Skoda W 200. A Head stock with spindel
Bploqlycis
Zu verkaufen Skoda W 200. A Spindelstock mit Spindel
for spindle taper: MK 4
Max. Input speed: 1500 rpm
Cl8gqcs0
Diameter up to: 10.2 mm
Shank Diameter for quill:
Construction height: 500 mm
Weight:
43 drills with different lengths and diameters
The dimensions can be seen in the photos.
The shafts have a diameter of 25 or 16mm
2saoke
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter
Jy3guni2
-Adapter
-Recording: MK6
-Tool holder: Ø 30 x 85 mm
-Number: 1x recordings available
-Price: per piece
-Total length: 290 mm
-Weight: 8.6 kg/piece
Pipe tap
Mufl7g
Make Reishauer
5/8 GG
85 mm long
Table size:- horizontal: 500 x 600 mm- vertical: 310 x 600 mmTiltable: 90°Dimensions LxWxH, approx.: 700 x 520 x 520 mmWeight, approx.: 280 kgNo.: 0320278
Birw70pc
for spindle taper: MK 3
Drilling Ø: 10 mm
Thread cutting: M 5 / M 8
min./max. Spindle distance: 35/120 mm
Case diameter: 170 mm
Muocxc
Case length: 218 mm
weight:
Multi-spindle drilling head
Type S 1302 Bormaster
Xswac
2 pieces
Max.drilling capacity in steel St 50 13 mm
i = 1:0,5
Recording REGO-Fix Swiss ER-20-M
Aluminium flange
Head D= 14 cm
Length = 13,3 cm
2 x tool 18x1.5 countersink
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter
-Adapter for the cone in the chuck holder of a lathe
-Outer mount: MK8
-Number: 10x recordings available
-2x holder: inside tool MK6
-8x holder: inside tool MT5
-Price: per piece
-Total length: mm
Bh2bilhuk
-Weight: kg/piece
Used Accessories and spare parts
Completely search Machineseeker and more than 2,00,000 used machines now.This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
