Panel Return Systems

LIGMATECH ZHR 05/R/105

Condition: used, machine/vehicle number: 007986, Max. panel width: 1000 mm Max. panel length: 2000 mm Length of conveyor: 3500 mm Bwedpfxsx A Tggo Af Aou Introduction system: with pushers

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. Bjdpfxjiidm Ns Af Aswu - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Bwedpfjx Rpgbjx Af Asu The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Year 2007. Bwjdpjvxvc Hsfx Af Aeu Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 0-250-84-4817, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, controller manufacturer: HOMATIC, total height: 2,800 mm, table length: 4,300 mm, table width: 2,250 mm, controller model: PC86 PowerControl, spindle motor power: 12,000 W, Equipment: documentation/manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 IMPORTANT: Available from mid October 2026 Maximum workpiece dimensions: • X-axis: 4300 mm • Y-axis: 2250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm EQUIPMENT / SPECIFICATION MATRIX-PRO working table, size 4300 x 2250 mm - 4 pneumatically retractable stoppers w. sensor monitoring Bedpjztl N Ujfx Af Aswu - 3 vacuum pumps, capacity 290/345 m3/h each at 50/60 Hz, total 870/1035 m3/h - 2 vacuum fields with each 2150 x 2250 mm - Safety mats, safety fences with door - Main spindle motor 11 kW, 24.000 rpm - liquid-cooled - spindle with C-axis - tool clamping system HSK F63 - Tracing system SENSO-FLEX, controllable in z-direction - vertical drilling unit w. 21 spindles, drive motor 2.3 kW - 14-fold tool changer (disk type) 1 CONVEYOR ROLLER TABLE 7080 x 2200 mm Control / software: - PowerControl PC86 power touch - WoodWop Machine dimensions 11,60 x 4,50 x 2,80 m Available from week 28/2026

Condition: used, machine/vehicle number: 008210, Max. panel width: 1000 mm Max. panel length: 2500 mm Bwedpfx Aex A Thwef Aou Length of conveyor: 10000 mm Introduction system: with pushers

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING AND EDGEBANDING FOR BATCH ONE Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open Feeding speed (adjustable) m/min 7-35 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Bwjdpoifnzdefx Af Aou In-feed fence, adjustable by N.C. Panels in-feed system A2 / 30 Pre-milling Unit (vertical joint trimmers) by N.C. 75.34 (2 x Kw 6,6) Glueing Unit (P.U.R. Glue + Quick Melt system) 2 - VTG 3-48 + 286.205 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 48 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 (CN horizontal positioning) Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,18 x 4) No. 3 Milling grooving units by N.C. 08.190 (Kw 4,5 x 2 + Kw 6,6 x 1)

Condition: new, Year of construction: 2023, functionality: fully functional, With our semi-automatic stretch wrapper, we enable you to wrap your pallets quickly and securely by machine. Semi-automatic stretch wrappers are particularly suitable if you have structured and clearly defined packaging processes. Turntable diameter: 1,500mm Maximum load: 1,500kg Bwjdjr Nc Ttjpfx Af Aeu Maximum pallet size: 800x1,200mm Maximum pallet height: 2,200mm

Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Bedpfx Ajipx Aiof Aewu Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Tech data: Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw 3. Dispenser Kuper Brand: Kuper Engine power: 0.75Kw 4. Electric cabinet Kuper Make; Cup Model: Schaltschrank 1/1 zu Stock no: 2001307PÅL

Condition: excellent (used), Year of construction: 2006, Guilliet LKT 630 thicknesser Working width 630mm Working height 300mm Shaft with 4 knives Shaft with conventional knives Shaft diameter 120mm Bedpsncbh Uefx Af Aewu Programmer for height setting Two feed speeds 8-16m/min Total power 8.5kw CE certificate Year of production 2006 Weight 950kg