Run press

LVD PPEB 135/3050 135T

Year of construction: 1999, condition: ready for operation (used), Euromac hydraulic punching machine Type CX1000/30/2000 Capacity 30ton Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin 6-fold multitool + with 6-fold die holder Gjdpfx Akopmt Tteaoug

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, 6 axes Y1 - Y2 - X - R - Z1 - Z2 Electromechanical follower pair Gedpex Sru Defx Akaeug Pneumatic punch and die clamping Pneumatic bending and pressing unit Intermediate pieces H = 200 Angle reader ACTIVE hydraulic crowning

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, TECHNICAL CHARACTERISTICS: ROSS Press Model: T50 Nominal force: kN 500 Min./max. slide stroke: mm 8÷100 Max. slide adjustment closed height: 70/275 Speed: c/min. 90 Clutch pressure: Bar 5.5 Motor frequency (Hz) / speed (r/min): 50/1410 Work surface size: L=650 x D=520; Shank hole: Ø50 Protrusion at the center of the ram: mm 260 Guedou Rdw Hspfx Akaeg Front passage: mm 290 Machine stop: PMS (top dead center) Complete with user manual and CE conformity Six (6) month warranty excluding electronic parts. NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Motor bearings; • Electrical panel; • Brake/clutch group; • Two-hand control; • Pedal; • Air regulator; • Plan revived on CNC machine

Condition: new, Bernardo universal lathe Solid 460 x 1000 Pro Center width 1000 mm center height 230 mm Swing diameter over bed 460 mm Swing diameter over offset 690 mm Swing diameter over cross slide 270 mm Bed width 300 mm Spindle bore 80 mm Spindle holder DIN 55029, D1-8 Speed range (12) 25 - 1700 rpm Range of longitudinal feeds (42) 0.055 - 3.065 mm/rev Face feed range (42) 0.025 - 1.386 mm/rev Metric threads (41) 0.1 - 14 mm Inch thread (60) 2 - 112 Gg/1" Quill diameter 60 mm Quill travel 130 mm Quill holder MK 4 Motor power 5.5 kW (7.5 HP) Machine dimensions (W x D x H) 2300 x 1080 x 1600 mm Weight approx. 1675 kg Machine features - Modern main spindle bearing with angular contact ball bearings in precision design - Hardened and ground gears and shafts, also in the feed gearbox - Central, handy control for feeds and threads with lead and feed spindles - The gears are large, hardened and precision-ground - The speed and feed adjustment is simple, smooth-running and precisely switchable - Longitudinal and flat rapid traverse as standard to reduce idle times - The machine bed, cast in one piece, is extremely torsion-resistant and low-vibration, thus fulfilling an essential requirement for precise turning Scope of delivery - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant device - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diam. max. 150 mm - Rotating steady rest - passage diam. max. 110 mm Gusdpfx Akjqwkd Usasg - Quick-change steel holder with 4 inserts - Safety device for quick-change steel holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slipping clutch - Longitudinal and flat rapid traverse - Interchangeable wheels - 2 centering points - Reducing sleeve - Thread clock - LED machine light - Chip back plate - Operating tool

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-column press with 10 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 0 - 10 mm/sec. downwards, b) Opening speed up to 25 mm/sec c) Starting press speed 10 mm/sec, adjustable from 0 to 10 mm/sec. d) Table size 600x300 mm e) Ram size 300x300 mm, with T-slots and central cylinder clamping f) Overall size approx. 1100x600x1850 mm g) Oil temperature display on oil tank h) Pressure setting from 0.5 T to 10 T (adjustable via rotary control) i) Cable remote control for downward/upward movement j) Machine body powder coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Assembly, commissioning, instruction at extra charge Type of construction Press design Single-column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Max. pressing force (at 250 bar) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool Steel on steel Max. 2 sec. Dimensions Max. Opening width 800 mm Stroke and min. opening 500/300 mm Table height above floor 850 mm Height above floor (headroom) approx. 2850 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 70% occupancy < = 0.1 mm/m Weight Total weight of the press without operating materials approx. 1.6 to Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke #ERROR! bar Main pump Gear pump approx. 6 L/min Guedpfx Akehma Smeaog Oil volume approx. HLP 46 MW 80 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 50 mm arm length 1.600 mm Gusdpfx Aozcqyfjkasg workpiece height max. 1.200 mm distance spindle/base plate 320 - 1.220 mm spindle taper MT 5 quill stroke 315 mm throat min. 350 mm throat max. 1.600 mm quill feed 0,04 - 3,20 mm/U drive capacity - spindle motor 4,0 kW spindle turning speed range 25 - 2.000 U/min column diameter 350 mm voltage 400 V total power requirement 6,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. Gjdpouxrtfefx Akaoug - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE

Condition: new, angular steel - leg outwards -- mm double T-iron on the x-axis -- mm U-iron on the x-axis -- mm 50 mm 150 mm throat 120 mm total power requirement 1,5 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 Gusdpfeu Rt Syex Akaog The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal

Condition: used, Year of construction: 2002, functionality: fully functional, input voltage: 380 V, pressing force: 160 t, stroke length: 350 mm, operating speed: 80 mm/s, reverse speed: 90 mm/s, table width: 4,175 mm, throat depth: 500 mm, clearance between the columns: 3,300 mm, total length: 4,650 mm, total width: 2,150 mm, total height: 3,200 mm, overall weight: 16,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, CYBELEC DNC 80 control system 6 controlled axes: Y1-Y2-X-R-Z1-Z2 Active hydraulic compensation LASER safety barriers Guedpfx Ajzybrrekajg Standard tool kit CE marking