Dividing head

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Klodpfx Absyn Nybocep Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: as good as new (ex-display), Year of construction: 2024, General Tool magazine : 2x chain magazine with 32 stations each Rapid traverse in X/Y/Z : 48 m/min Traverse path X/Y/Z : 800/900/620 mm Spindle Technology : Direct drive Speed : 15.000 rpm Tool holder : HSK-A63 NC rotary table Technology : Swivel rotary table with torque drive, made by Kessler A-axis : +/- 120 C-axis : 360° Clamping surface : ø800 mm Table load (max.) : 1,000 kg Workpiece dimensions (max.) : ø800 x 500 mm Equipment Distance measuring system : Direct (glass scales) in all axes Chip management : Chip conveyor Kodpfjur Ng Usx Abcelp Coolant management : IKZ system with filter and high pressure, 18 bar Workpiece measurement : Touch probe, Heidenhain TS 740 Tool measurement : Laser, BLUM Set-up mode : Electronic handwheel Additional equipment : Spindle cooler

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, load capacity: 1,500 kg, fork length: 1,100 mm, overall weight: 3,350 kg, total length: 3,100 mm, total width: 1,000 mm, TECHNICAL DETAILS Klsdpfx Aboyt Nl Iecep Lifting capacity: 1,500 kg Fork length: 1,100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,000 x 2,000 mm Weight: 3,350 kg EQUIPMENT Charger

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Wave soldering system with comprehensive equipment! A spare parts package worth approximately €20,000 is included in the sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F - Fluxer SelectFlux - Streamline transport system including lifts TECHNICAL DETAILS - PULSAR preheating: 2 convection and 5 pulsar preheating zones (3,300 mm length) - Wetting length (soldering system): 40 mm + 30 mm - Return transport level: raised 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS - Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit - Foldable convection top heater Ksdpfxeyt Nlbo Abcelp - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7-row - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. timer control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen economizing circuit - Transponder system for automatic switching of soldering programs - Selective flux module (external unit) - Flow sensor for flux per spray head - Flux reservoir tank with connections - Replacement filters for external spray fluxer module – upper and lower machine sections - Spare PC

Condition: new, Year of construction: 2025, -Custom-Made Machines Tailored to Your Production Needs. -Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance. -Finishing: Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance. Kjdpfx Abohq Dbxocslp -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands. Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow Built for Durability. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 003002, paper weight (min.): 35 g/m², paper weight (max.): 209 g/m², paper width (max.): 738 mm, paper height (max.): 1,300 mm, TECHNICAL DETAILS Kledsyrnz Espfx Abcop Max. paper size: 738 x 1,300 mm Min. paper size: 210 x 297 mm Sheet height: 1,200 mm Paper weight: 35 to 209 g/m² MACHINE DETAILS Power supply: Three-phase, 400 V Current: 12.6 A Connected load: 5.3 kW Dimensions (L x W x H): approx. 4,380 x 1,870 x 1,680 mm EQUIPMENT PFU-74F pallet feeder User-friendly touchscreen control panel 6 folding pockets First knife fold and 2 pockets under the knife Second knife

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Kledpfx Abeyrmzqjcep Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Condition: ready for operation (used), Year of construction: 2015, Used Timesavers Deburring Machine 42-Series-1350-WRB Technical Specifications: Kljdpoyk U Szofx Abcep Year of manufacture: 2015 Condition: refurbished (2026) The machine is under power and can be inspected by appointment! Max. working width: 1350 mm Abrasive belt dimensions (W x L): 1380 x 1900 mm Antistatic device Maximum weight: 100 kg Electrical connections: 400 V Frequency: 50 Hz 1st Unit: Contact roller Ø 180 mm Contact roller 55° Shore NI, grooved Pneumatic oscillation Fine adjustment by raising/lowering the contact roller Dial gauge Main motor 15 kW Processing speed: 11 m/s, in feed direction 2nd Unit: Rotary brush unit 8 brushes Ø 350 mm Motorized height adjustment with tip switch Drive motors: 5x 1.5 kW Rotational speed of the unit, frequency controlled Processing speed: 6 – 17 m/s 3rd Unit: Wall-mounted parts cleaning brush Feed: Fixed vacuum table Feed belt, flat and perforated, oil- and heat-resistant, flame-retardant Feed motor 2.6 kW, frequency controlled, 0.6 – 8 m/min Tip switch for forward/reverse feed belt Motorized height adjustment of table 0.18 kW, 0 – 100 mm, digital display Pressure rollers: Spring-loaded pressure rollers Ø 50 mm, with limit switch at the front Vacuum pump 15 kW Machine built to CE standards Main switch, operating hours counter Sound pressure level: ± 80 dB Machine weight: 6,200 kg Extraction and/or installation service can be offered on request!

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 2. Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Klodeyub R Eepfx Abcsp Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar passage: 34 mm, controller model: Fanuc 21T Modell B, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bar capacity: 34 mm MACHINE DETAILS CNC control: Fanuc 21T Model B EQUIPMENT CS axis left CS axis right Approx. 26 fixed tool holders 2x driven tool holders (1x axial, 1x radial) Klsdpfx Aoyrf Enebcsp Hainbuch collet chucks left and right Chip conveyor Manuals Note: The bar feeder is not included in the offer.

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,100 mm, sheet thickness (max.): 100 mm, The 32 RB series offers the solution for manufacturers delivering premium-quality products. This top quality is achieved by a multi-rotating brush unit with four abrasive lamella brushes, which evenly deburr and perfectly round the edges of the metal. Multi-directional rotary brush deburring machine (RB) for consistent deburring and finishing of flat sheet metal parts. All-around processing in a single pass, providing the part's surface with a non-directional finish. Equipped with one (or more) abrasive belt units (W) for pre-deburring and final finishing. - Abrasive belt unit - Rotary brush unit (self-calibrating) Klodpfx Aexw Ikcebcep - Abrasive belt unit

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, overall weight: 8,700 kg, workpiece length (max.): 165 mm, workpiece diameter (max.): 35 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Max. output: 7,200 bottles/h Product dimensions Max. preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Max. neck finish diameter: 38 mm Neck height: 9–27 mm Max. bottle height: 350 mm Max. bottle diameter: 105 mm Max. bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow module: 6,300 kg Control cabinet: 1,200 kg Preforms feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10 % Frequency: 50 Hz ±1 % Ksdpfeyrfvgox Abcolp Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 207000046, paper weight (min.): 50 g/m², paper weight (max.): 300 g/m², production capacity: 19,680 unit/h, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer: €143,250! Production printer with the following configuration: - Input Interface Module-B1 - Paper Input Module Standard-B1 - Paper Input Module Optional-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Printing speed A4: up to 328 ppm Printing speed A3: up to 171 ppm Maximum monthly print volume: up to 10,000,000 A4 pages Resolution: 600 x 1,200 dpi Paper specifications: Total paper weight range: 50 gsm – 300 gsm Plain paper (Canon recommended media): 50 – 300 gsm Coated media (Canon recommended media): 80 – 250 gsm Paper format: 203 x 203 mm to 350 x 500 mm MACHINE DETAILS Main unit dimensions: Main unit dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm Kledpfx Aeyrd Rcobcop Main unit weight: 779 kg Meter readings: A4 simplex: 67,535 A4 duplex: 52,601,622 A3 simplex: 0 A3 duplex: 3,853 SYSTEM CONFIGURATION - 4x Paper Input Module - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript - Streaming & PrismaSync

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Specifications: • Year of manufacture: 2010, Machine No. 347283 • Fixed angular table • Infinitely variable spindle speed up to 4,500 rpm • Infinitely variable feed in 3 axes from 0 to 2,000 mm/min • Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min • Travel X/Y/Z: 400/350/400 mm • Table size: 650 x 350 mm • Table load capacity: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic clamping system • Weight approx. 1,800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Equipment: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manuals and programming examples • Handwheels Kledpexuppuofx Abcsp • Coolant system • Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has seen very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very straightforward by swinging away the vertical head. The ways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann on-site under power. There are 7 units of Kunzmann WF4/3 with the TNC 320 Heidenhain milling machines available. The machines are available immediately.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Electrical and Safety Voltage: 400 V Protection class: 1 Connected load: 77.4 kW Footprint & Weight Klodpfx Abjypdw Docjp Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Portal loader GL 100 F