CNC milling machine

MAHO MH 600 T

Condition: good (used), Year of construction: 2004, operating hours: 6,293 h, functionality: fully functional, For sale is a machining centre from the manufacturer Deckel Maho, model DMU 50. The machine is in good condition and can be inspected on site. Kledpfx Apeyghqvjdou

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° Klsdpfx Apjtqqmhjdeu total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: used, Year of construction: 2000, x-travel 800 mm Kodpfxjy T Scks Apdolu y-travel 600 mm z-travel 500 mm Control Heidenhain spindle tunring speed 15.000 U/min tool taper SK 40 table surface area ø630 mm In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2016, operating hours: 200 h, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, feed length X-axis: 100 mm, feed length Y-axis: 190 mm, feed length Z-axis: 325 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 270 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 300 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 190 mm, table width: 200 mm, table height: 1,020 mm, power: 1.1 kW (1.50 HP), height adjustment type: electric, workpiece diameter (max.): 400 mm, input current: 20 A, grinding diameter: 300 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 280 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2022, distance table to spindle center: 325 mm, tool diameter: 300 mm, workpiece length between centers: 270 mm, distance between centers: 270 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2016 S25 003004 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 Ksdow U Ehbepfx Apdelu * Tightening screw M 16 * Counter bearing complete with 4 center punch points * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions ##### Machine is partially overhauled and has an electrical acceptance report!#####

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Ksdpfx Ajvpdhxopdolu Specifications see attached PDF. Leasing possible. (All prices are NET)

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws Klsdpfoh Hvk Asx Apdju - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: ready for operation (used), Year of construction: 2006, CNC machining center DMC 635V Year of manufacture 2006 Heidenhain TNC 530i control Control approx. 58,400 hours Program run approx. 19,980 hours According to the sticker in the control cabinet, the spindle and motor were replaced in January 2019 at 10,660 hours. No documentation available. Machine runs smoothly Travel distances X 635 Y 510 Z 460 Tool holder SK 40 20-position tool changer Ksdsw Tir Uopfx Apdslu Table 790×560 with chip conveyor Weight approx. 3700 kg This offer is directed exclusively at commercial enterprises within the meaning of §14 BGB (German Civil Code). No sale to private individuals.

Condition: used, TECHNICAL DETAILS - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg]. Klodpfjuhbplsx Apdsu EQUIPMENT - with part loader

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm Klodpsdmbrxjfx Apdju swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm total power requirement:18 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: excellent (used), Year of construction: 2005, CNC Lathe GILDEMEISTER NEF 400 Year of manufacture: 2005 Control: Siemens 840 D Technical specifications: Turning length: 650 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 270 mm Spindle bore: 65 mm Travel X-axis: 220 mm Travel Z-axis: 700 mm Max. main spindle speed: 4,000 rpm 8-position tool turret Machine weight: approx. 3,175 kg Kedpoyin Imsfx Apdolu