Used Cut-To-Length-Lines for sale (50,650)

Condition: good (used), Year of construction: 1990, Rolled metal uncoiling, cutting and coiling line LTs. Line 1300mm/3mm. for precise cutting. For uncoiling, cutting metal, cutting into smaller rolls, coiling into small rolls. The line was bought new, owned by one owner, serviced on time by LTs representatives. The machine is connected and can be tested at any time in Vilnius, Lithuania. The LTs 1300/3 cutting line consists of: Uncoiling decoiler Multi-blade scissors Stop and cut-off segment Spinner with separator Trolley Wardrobe with control panel Technical specifications: Metal width: 1250 mm. Thickness: 700 mm. Diameter min.: 508 mm. Diameter max.: 620 mm. Klsdepbwapopfx Aayjr Outer circle diameter: 1200 mm. Maximum weight: 7 T. Width of cut strips min.: 75 mm. Cut tape max. width: 1250 mm. Supply voltage: 3 x 380 V. Power: 18 kW. Made in: Poland Year: 1990 If you have more questions, welcome.

Condition: used, The machine is designed to straightening and cut metal from a roll. Fully functional, straightening machine engine replaced a few years ago, Lenze. New software Lenze has been installed. The machine is programmable. Adjustable width, cutting length, sliding table. There is a remote control. There is an additional blade for the guillotine. Working width: 1500 mm Thickness: up to 2 mm If you have more questions, we will be happy to answer them. Kedem E U Hijpfx Aayelr

Year of construction: 2023, condition: new, Cut to length machines FORSTNER COMPACT functions: - straightening (rolls diameters 70 mm) - slitting (max 7 slitting knives) Kledpfjiy N I Iox Aayjr - cutting (guillotine or roller shear) Available coil width - 1250 or 1500 mm

Condition: used, Belt line cutting device, cut-to-length line, cut-to-length shears, lever cutting machine, lever cutter -Cut-to-length system: with additional lever cutter, made from slats/blinds production Klsdpfx Asqh Efijaysr -Cutting width: max. 210 mm -Cutting thickness: max. 0.5 mm -Lever cutter: IDEAL 2035 -Transport dimensions: 1025/500/H1240 mm -Total weight: 122 kg

Year of construction: 1993, condition: ready for operation (used), A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible. Kedpfjw Az Rpox Aayjlr

Condition: excellent (used), Rema AP-500 Optimizing Saw Infeed material length: 500–6250 mm Blade diameter: 500 mm Motor power: 6 kW Kjdpfx Aaext Ezkeyslr Pusher speed: 60 m/min Defect cutting: fluorescent chalk reader Margin trimming CE certificate DTR technical documentation Year of manufacture: 2018

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Kljdpfx Ajxdi Agjayer

Condition: excellent (used), Cross cutting line Kledpjyf Dy Dsfx Aayor Cutting blade diameter 400 mm Electronic pusher

Condition: good (used), A.Saint 1500 x 2 mm cutting line, I have more photos on my website Kljdeiihp Sjpfx Aaysr

Year of construction: 2023, condition: as good as new (ex-display), PY-1200 is an ideal and professional machine in die-cutting，creasing，embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to paper cup,paper box,medical package,wine package,food package and other environmental protection products. Cut Precision ~ 0.10mm Production Capacity 150-210 times/min Max cutting size 120x64 cm Maximum pressure 350 tons Klsdpoxnkdgsfx Aayjr Total power 14.5 kw Total weight 8400 kg overall dimensions 4.2x2.3x1.85 m

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98125446, saw blade diameter: 500 mm, cutting height (max.): 75 mm, positioning accuracy: 1 mm, cutting width (max.): 180 mm, CNC full optimization cross-cut sawline PAUL 11MKL for soft and hard wood. Line include : infeed conveyor with length 11525 mm, double side table for marking wood defects, measuring station with luminescence and light barrier for wood start and end detection, sawing station and outfeed conveyor 11500 mm sorting line with 5 side pushers to sorting table. Wood input length 2000-6000 mm Wood width 30-180 mm Wood thisckness 6-75 mm Min cross-section 30x15 mm or 45x6 mm Max cross-section 130x75 mm or 180x45 mm Saw blade diameter 500 mm Saw motor 5.5 kw , saw stroke pneumatic, saw cycles 0.4 sek Feed speed max 200 m/min Power consumption 11.4 kw Kjdpsxrr S Hefx Aayslr Control software CNC MAXI 5 Premium Line is in full working condition

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Working direction: from right to left. Automatic loading unit. Minimum workpiece length 600 mm (shorter workpieces can be placed directly on the machine infeed table). Model “Speed” (faster material loading, see PDF). Usable length 6000 mm. Cutting accuracy +/- 1.5 mm. Cutting range, see diagram (PDF). Motor 5.5 kW, saw blade ø 500, 3600 rpm. Electronic control CONTROL 6.0 / Windows. Full optimization with error correction. Waste disposal package. Outfeed table with integrated cross pushers 3500 x 1500 mm. PALETTI data connection for use with cutting lists issued in the office. Automatic labeling (PALETTI print manager). LAYOUT. See all technical features attached PDF. Kledpsxtmwmsfx Aayor

Condition: used, RSA center for high-performance cutting, deburring, cleaning, drying and stacking for steel and stainless steel tubes. Scope of Supply: - 1 RSA high-speed precision saw model RASACUT NC 1500 - 1 Transfer system between the RASACUT precision saw and the RSA tube feeding system 1500 - 1 RSA tube feeding system 1500 - 1 RSA cleaning system RASACLEAN ET 1500 Including: - 1 RSA drying system TURBODRY - 1 RSA RASAPORT 1500 PR system High production High precision Very short setup times Ksdpfxoymapqj Aayslr Easy handling Easy machine connection RSA High performance Saw RASACUT TWIN NC 1500: Fast and Precise Round diameter: from 10 to 40 mm Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm Round diameter: from 10 to 40 mm Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested As is Availability immediate Kodpfexlq Nwex Aayslr

Condition: used, RSA RASACUT SC 3000 – Complete automatic tube cutting, deburring, measuring, cleaning & drying line This is a complete RSA high-performance tube processing line for continuous production, from stock tube to finished fixed-length tube sections up to 3,000 mm. The system integrates the full workflow: Bundle Loader → Cutting → Deburring → Measuring → Cleaning (washing) → Drying, with automatic transfer between stations. KEY FEATURES · Fixed length cutting up to 3,000 mm · Complete RSA line: Bundle Loader + Cutting + Deburring + Measuring + Cleaning (washing) + Drying · Automatic tube singulation from bundle magazine · Servo-controlled saw forward feed with programmable cutting parameters Kjdpfx Aajyllvyoyolr · Automatic interlinking between stations (no manual adjustment required) · Deburring with 360° rotation, inside + outside edges · 100% length measuring with automatic rejection · Integrated washing and drying system for finished tube preparation · Siemens control: S7-300 + OP17 · Supplied with a large set of wrap-around jaws TECHNICAL DESCRIPTION 1. Bundle loader magazine The tube bundle is loaded by crane or forklift into the magazine. The system automatically singulates the tubes and feeds them into the roller infeed, allowing continuous production from stock tubes up to 8,000 mm. 2. Cutting | RSA RASACUT SC 3000 Automatic sawing unit with servo-controlled saw feed and electronically controlled length stop. Tubes are clamped and cut to the programmed fixed length, with programmable cutting parameters for repeatable cutting results. 3. Deburring | RSA RASAPLAN XY 3000 Automatic end deburring system using high-performance brushes on both sides. Each tube rotates 360° during brushing, enabling simultaneous inside and outside deburring of both end faces. Automatic adjustment is performed from the central control. 4. Measuring | RSA RASACHECK 3000 A Integrated length measuring station providing 100% control of finished parts. Workpieces outside the programmed tolerance limits are automatically rejected, ensuring only compliant parts proceed to the next stages. 5. Cleaning | RSA RASACLEAN ET 3000 Washing system designed for thorough removal of swarf and dirt particles. Workpieces pass through a sealed washing zone where the cleaning medium is applied under pressure and contaminants are collected in a swarf filter. 6. Drying | TURBODRY Hot-air drying station with adjustable air volume and temperature. Removes droplets and condensation after washing, delivering dry tube sections for downstream handling. 7. Tooling | Large set of wrap-arount jaws Supplied with a large set of wrap-around jaws covering multiple tube diameters, enabling quick changeovers without additional tooling. WORKING RANGE · Round tube diameter: 10 to 90 (101) mm · Wall thickness: 0.6 to 6 mm · Stock length (incoming tubes): 8,000 mm · Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) · Tube weight: Max.10 kg/m · Length/diameter ratio: 2:1 · Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Can be inspected in production (seen running). Contact us for a quote, full details and inspection arrangements. Round tube diameter: 10 to 90 (101) mm Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Wall thickness: 0.6 to 6 mm Tube weight: Max.10 kg/m Length/diameter ratio: 2:1 Stock length (inc...

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Kodpsx Eb Abjfx Aayslr Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2301.14, Sawn timber length cross cut line, timber width 20 - 300 mm, height 10 -100 mm Kjdpfow Rr Dbsx Aayolr

Condition: ready for operation (used), Maximum saw blade diameter: 550 mm Motor power: 5.5 kW Maximum cutting length: 5 m Kljdsxx Scfepfx Aayer Discharge table with four ejectors Control via touchscreen panel with inPush software Loading table with chains Length: 7800 mm Depth: 1600 mm Weight: 1500 kg Saw blade speed: 2800 rpm Year of manufacture: 2014 CE marking

Condition: excellent (used), Meren Jonson Multi-Saw with Automation Powered roller infeed with centering Roller outfeed with side pusher Rubber crawler feed system Press rollers under the shaft for cutting short pieces Smooth feed speed adjustment Maximum cutting height: 100 mm Supported saw shaft Main motor: 75 HP (56 kW) Planer Double-sided planing (top and bottom) Working width: 610 mm Working height: 152 mm Bottom motor power: 15 kW Material removal: 12.7 mm Klsdpexm Sczjfx Aayer Electrically adjustable working height Maximum feed speed: 30 m/min Automatic lubrication system Total power: 50 kW

Year of construction: 2007, condition: used, functionality: unexamined, Elumatec MGS 105/01 single head mitre saw with cut to length system, E111 digital display, E555 control, infeed and outfeed roller conveyors, s/n 1050126588 (advised 2007) This lot is located in Farnworth, Bolton. Klodpfeyg Rfcjx Aaysr Collection must be made on Tuesday 3rd March 2026.

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Motor 400 V / 5.0 kW speed 2800 rpm Kodpfx Aekwhmfjayolr cutting length 420 mm Cutting width 420 mm at 90 295 mm at 45° Cutting height 200 mm at 90° 140 mm at 45 Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Saw blade-Ø 520 mm x 50 mm suction nozzle-Ø 100 mm Weight 250kg With the following equipment options: - HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood - Machine can be tilted on both sides from the front via hand crank Availability: short term/2022 Location: Solingen

Condition: new, Year of construction: 2023, Line for joining wooden elements to length, type PDFE (full-automatic double-milling machine version) - milling package width 650 mm - length of connected elements 190 – 800 mm - width of joined elements 30 – 150 mm - thickness of joined elements 20 – 60 mm - adhesive contact elements made of stainless steel - package alignment option in milling machines (laser sensor) Klsdpspy Eb Usfx Aayjr - buffer table equipped with a mechanism for turning over elements (brush) - a claw dropping elements onto a chain conveyor controlled by a servo drive - working length of the press 4500 mm - chain conveyor PTŁŁ 3500 mm - line and zigzag connections - central control on Mitsubishi components

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw Ksdpfow Rg Emsx Aayelr - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Kledpfxexa Excs Aayor

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more. Klsdjxa Ettopfx Aayor