Used Orwak Tom 1040 for sale (4,036)

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Bdedpfeuv Eudox Af Ash Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Bdjdpfx Afsd H Hmho Aeh Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: excellent (used), X-ray sorting system. Manufacturer: TITECH TOMRA Model: X-TRACT 1200 Year: 2012 The machine is in very good condition. Complete machine overhaul carried out. Source renewed: €35,000 All sensors replaced: €29,000 Belt replaced. Areas of application: - Metal sorting - Sorting of wood, production of refuse-derived fuels (RDF) - Sorting of organic waste Bedpfx Afey Ra D Ro Aodh

Condition: refurbished (used), Year of construction: 1994, working width: 240 mm, planing height: 160 mm, planing width: 240 mm, working height: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 111 A, We are offering this fully overhauled OTTO MARTIN T 90 planing and profiling machine, year of manufacture 1994. Model: T 90 Serial number: V 215410 Year: 1994 Bdedpfx Afoyq D Ifs Aoh Working width: 240 mm Working height: 160 mm Speed: 6000 rpm Voltage: 400 V Frequency: 50 Hz Number of phases: 3 ~ Rated current: 111 A Operating pressure: 6 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Robotic welding system with a two-station positioner. For sale: a robotic welding system from Yaskawa Motoman, including an RM2-500 positioner. Robot: EA1400 NX100 and so on. We can assemble and commission the system. We also offer training and instruction. The system will be refurbished according to the customer's requirements. Bdodpfx Afjgttytj Ash We are a YASKAWA system partner and offer you complete service for your Motoman robot and your systems.

Condition: used, Year of construction: 1996, Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Bjdpsk Abn Ssfx Af Asdh Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2023, operating hours: 10 h, condition: new, functionality: fully functional, Here we offer a machine that was specially developed for fixing loose or cracked branches. The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement Bedpfx Afspiufwj Aedh • Easiest operation DIAGNOSIS AND CORRECTION • Rotten branches • torn branches • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.

Condition: excellent (used), Year of construction: 2008, Sprue picker ALS AUTOMATIZATION TECHNOLOGY Bdjdpfjuu S Dhjx Af Ajh STV 550 CE. Year 2008 2x PIECES available

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place Bdodpfsibichjx Af Aeh - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: reconditioned (used), Fortuna Roll Press/Dough Dividing Machine, Size 3, for dough pieces weighing from 35 to 85 grams. The machine has been refurbished and repainted. Equipped with 3 forming plates. 4x16 Ah connection. The machine is in excellent working order and can be put into operation immediately. If you have any further questions, please contact us. Thank you. Bdodjc Utkaspfx Af Aoh

Condition: good (used), Year of construction: 1987, operating hours: 800 h, functionality: unexamined, 1pc. Cam-controlled multi-spindle automatic lathe Schütte AF51 Series 09-06 Year 1987 8-spindles ø max. 51mm. 1pc. IEMCA PRA bundle loader (interface available) 33 different cam sets included (see accessories list for details) 1 pc. Balluff Mini Controller BMC 1 pc. Chip conveyor 10 different change gear sets (see accessories list for details) 8 ø28mm round collets (see accessories list for details) Bdedpfx Aeu Edp Sof Aoh Paint finish light blue & light gray

Year of construction: 2020, condition: new, Transport systems Bdodpfx Afjflmdwe Aeh Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Year of construction: 2003, Used steam boiler Manufacturer: Viessmann Type: Vitomax 200 Year of manufacture: 2003 Rated thermal output: 375 kW Boiler water content: 1400 l Operating overpressure: 8 bar Gas burner Weishaupt G/1E - ZMD-LN version Output: 80-550 kW Year of manufacture: 2003 Connection pressure: 15-500 mbar With existing Dungs DN40 fittings Мы говорим по-русски! (We speak Russian!) Please arrange inspections by phone only! We prefer to sell to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. Bdodpfx Asfm E Ifjf Aoh The seller assumes no liability for typing or data transmission errors. We would be happy to purchase your used boiler or burner! Of course, we will also take care of all formalities. Loading possible.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, TOMRA SORTING | Vibrating channel feeder Manufacturer: Tomra Sorting s.r.o. Model / Type: Vibrating channel Serial number: 1144-041091 Year of manufacture: 2019 Power: 2 kW Drive system: Power Grid s.r.o. Bdedpfx Afszczugs Aeh Type: PG Shaker Drive Drive serial number: PG 1818-0683 Tested: 02/05/2018 Working channel dimensions: 2900 x 1950 mm Dimensions: 3000 x 2050 x 1750 mm Professional, large-scale vibrating channel feeder (commonly known as a vibratory channel) from the renowned, global leader in sorting systems and process automation – TOMRA Sorting. The device is designed for demanding tasks such as close-range transport, linear dosing, preliminary separation, and uniform distribution and feeding of a wide stream of raw material to subsequent process sections (such as optical laser sorters, X-RAY inspection systems, slicers, or IQF freezing tunnels). The machine's construction is based on a massive stainless steel / acid-resistant channel with an impressive working width of 1950 mm and a length of 2900 mm. The feeder's operation is based on inertial vibration technology, generated by a specialized, energy-efficient Power Grid Shaker Drive system with a power of 2 kW. The vibratory motion ensures that the raw material moves smoothly and inertially across the channel surface.

Condition: used, functionality: unexamined, The EL-BPC 200 industrial computer from Eckelmann Industrieautomation was removed from a palletizing robot system. Bsdpszfwmvofx Af Aedh

Condition: excellent (used), Year of construction: 2015, working width: 3,000 mm, total height: 1,000 mm, cutting height (max.): 10 mm, The ATOM FlashCut EASY 888 L30 plotter is an advanced digital knife cutting machine designed for precise and rapid cutting of a wide range of materials, including leather, textiles, foams, and plastics. It is especially valued in the footwear, leather goods, and technical gasket/component manufacturing industries. ⸻ 📐 Technical Specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Key Features • Versatility: The plotter enables cutting of various materials, from soft leathers to rigid plastics. • Ergonomics: Its compact and ergonomic design ensures ease of operation and space savings in the production facility. • Vacuum system: The dual-zone vacuum system ensures stable material hold during the cutting process. • Cutting head: Supports various tools, including oscillating knives and crease tools, enhancing production flexibility. ⸻ Bsdpfx Ajy D Sa Def Ajdh 🏭 Industrial Applications The ATOM FlashCut EASY 888 L30 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising materials production ⸻ 🛠️ Additional Information The L30 model is particularly recommended for companies seeking a solution that combines high cutting precision with production efficiency. With the ability to process large material formats and support multiple cutting tools, this plotter is suitable for both serial manufacturing and individual project tasks.

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity. Bdjdpfx Asyylqbsf Aoh

Year of construction: 2017, condition: excellent (used), I sell the turning device AUTOMATICA DVPGP. Year 2017. Bdedpfxow Am Nde Af Aoh One side feeding suitable for line. Element width up to 1400mm Total length 4500mm Available immediately. Ready for work, possible to test.

Condition: used, OTO MILLS Double decoiler with bottom/top hold-down roll Model AD508SD Bdodpfxjymadze Af Ash Scope of supply includes: - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Mandrel: Double hydraulic expansible mandrel Mandrel rotation: Hydraulic Uncoiler rotation/lock: Hydraulic Uncoiler traverse for alignment: Hydraulic Brake pneumatically-operated disc: OTO Mills

Condition: used, Complete entry line, made by OTO MILLS - Double Decoiler with bottom/top hold-down roll - Strip peeler & Pinch-roll - Automatic strip joiner - Extra-sized horizontal accumulator Scope of supply includes: Double Uncoiler AD508SD - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Pinch-Roll and flattener PRS566 - 3+2 rolls - Hydraulic roll positioning OTO Mills 100% automatic butt-welding unit GG566 - Complete automatic joining and welding process - Strip exit table with encoder - Motorized strip exit Pinch-roll OTO Mills Horizontal Accumulator - Heavy Duty horizontal accumulator - Motorized Feeding Pinch-roll – 106 KW Bsdpfxoymatie Af Asdh - Rotating table with Main motor 106Kw - Approx. 6,5 meter external table - Exit strip guiding Turret OTO Mills Tube diameter: 76,1 - 168,3 mm Material thickness: 2 - 6.3 mm Double Uncoiler: AD508SD Pinch-Roll and flattener: PRS566 100% automatic butt-welding unit: GG566 Accumulator: Heavy Duty horizontal accumulator

Year of construction: 2007, condition: excellent (used), functionality: fully functional, working width: 1,000 mm, machine/vehicle number: XB005M A551335-01, Near-infrared device Tomra Polysort 1000 in very good condition, operated only with dry material. Includes acceleration belt and expansion hood with separation head. Bdedpfx Afsymlqme Aoh

Condition: good (used), Fortress Phantom Metal Detector Fully stainless steel Aperture 500mm wide x 225mm high Bodpfx Aoxtfw Ssf Asdh 1500mm long Belt Stop and alarm Video available on request

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Bdedpfx Aoya H S Sjf Aeh Reel to reel lamination option

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, PASTEURIZER machine for sale. Manufacturer: Tomo Varga d.o.o. Year of manufacture: 2016. The machine is in working condition and ready for operation after reassembly. Detailed information about the machine: The pasteurization chamber reaches an operating temperature of 85 to 100°C. Batch filling in carts 850x900x1350 mm, which can be carried into the chamber with a forklift and stacked on top of each other. Pasteurization is done with direct steam. The flow of steam inside the chamber is directed by a 5 KW fan. Regulation of temperature and pasteurization time from 60 to 100°C. Wall and door insulation 150 mm thick. The chamber is made of stainless-steel sheet AIS I304. Bdjdpfx Ajwp E Hnof Aeh Capacity 1056 polypropylene bottles of 1.5 l. The dimension of the whole machine is 270 x 300 cm It also has a smaller electrical cabinet but that can stand separate (see picture called external electric cabinet) Included with the device: 4X carts for inserting products into the chamber and an electrical cabinet with control panel (Touch screen) The device is disassembled for transport and can be viewed in this condition at the following location: Posavska ulica 59, 10372 Oborovo (Glazir d.o.o.). Working hours: Monday - Friday (from 08:00 to 14:00). For additional information, please contact via phone number listed or email for company GLAZIR d.o.o.

Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine The most efficient machine on the market from a legendary manufacturer. This advanced machine boasts high performance thanks to an external heating thermostat. Made in Great Britain. Bsdpezz Hfysfx Af Aodh Technical specifications: Max sheet size: 1060mm x 1060mm Min sheet size: 320mm x 285mm Min grammage: 115 gsm Max grammage: 650 gsm Operating temperature: 80-135°C Max operating speed: 120m/min Weight: approx. 4500 kg 380V power supply Additional 8 bar air supply Large-diameter, chrome-plated steel cylinder, filled with water for greater stability. Double-sided laminating Pneumatic clamping, separation, and automatic feeding. Adjustable pressure. High-stack feeding, Heidelberg Speedmaster feed head. Expansion roller for film fixing. Sheet straightening module. Stacker for sheet removal. The machine can operate in pallet-to-pallet or pallet-to-roll configurations. Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers.