Used Bekomat Condensate Drain for sale (1,439)

Condition: used, Year of construction: 1995, machine/vehicle number: 15809, functionality: not functional, Vacuum Dryer / Drying Chamber DWT / IWT MD 2600 x 15000 Used Compact System The machine is still connected to power and heating but has not been in use for the past 6 months. *PLC control renewed in 2014* *Vacuum pump defective* Dryer diameter: 2600 mm Dryer length: 15000 mm Package length: 15000 mm Package width: 1200 mm Package height: 2100 mm Gross capacity: 38 m3 Net capacity: 25 m3 of sawn timber or 18 m3 of log wood Electrical connection: 50 kW Power consumption: 18 kWh Drain: 50 mm Water connection: 25 mm Heat connection: 87 kW, 85 °C hot water at the dryer Heat consumption: 500 kcal per liter moisture or 0.6 kW per liter moisture Including heating boiler operated with heating oil (*approx. 15-20 years out of service*) Hydraulic, fully automatic boiler closure Boiler material: solid stainless steel according to DIN, x5 Cr Ni 189 150 mm insulation, sheathed with 1 mm galvanized steel sheet 1 rail bridge in front of the boiler 5 trolleys for loading and unloading, each approx. 3000 mm long 15 fans with Siemens motors Heating register as stainless steel finned tubes with aluminum fins, approx. 180 m long, surface area 280 m2, diameter 25 mm Supply and return pipes, diameter 80 mm Heating medium: 85 °C hot water at the user Circulation pump capacity: 75 m3/h 3 fans for steam condensation Rails in front of the dryer: 16000 x 600 mm The entire system stands on a concrete foundation and can be lifted and loaded as a single unit with a crane. Dimensions for transport: approx. 21000 mm long, 3050 mm high (without cooling system) Hodoy Aawnopfx Aguon Sale from location 52146 Würselen, without dismantling, without transport and installation. Dismantling, loading, and transport by us optionally available. Subject to error in description and price. To avoid possible misunderstandings, inspection on site by appointment is possible and recommended. Sale as is.

Condition: new, Year of construction: 2025, machine/vehicle number: MASM13T, Stock machine available immediately Hedpfx Agjix Akpouon New Kaeser SM 13 T - 10 bar screw compressor with integrated refrigeration dryer with ECO-Drain (level-controlled condensate drain) Control: SIGMA CONTROL 2 Year: 2025 Pressure: 10 bars Rated power: 7,5 kW Delivery quantity at 10 bar: 1.08 m³/min Sound level: 65 dB(A) Compressed air outlet: 3/4" Dimensions length x width x height: 630 x 1090 x 1100 mm Weight: 315 kg Operating hours: 0 hrs Visit our store. We always have a wide range of new and used compressors in stock!

Condition: new, Year of construction: 2025, machine/vehicle number: MA0123_1401, Machine available at 28.03.2023: New Kaeser SM 16 T - 8 bar screw compressor with integrated refrigeration dryer with ECO-Drain (level-controlled condensate drain) Control: SIGMA CONTROL 2 Hedpfxshmu Ugj Agusn Year: 2025 Pressure: 10 bars Rated power: 9 kW Delivery quantity at 7,5 bar: 1.62 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Dimensions length x width x height: 630 x 1090 x 1100 mm Weight: 315kg Operating hours: 0 hrs Visit our store. We always have a wide range of new and used compressors in stock!

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 101780.0, Exhibit immediately available: New Kaeser Aircenter SM 13 - 10 bar screw compressor with integrated refrigeration dryer and 270 liters compressed air tank Control Sigma Control 2 Year: 2025 Hedpfx Agjv Ebl Touon Operating hours: 1 hr Pressure: 10 bars Rated power: 7,5 KW Delivery quantity 10 bar: 1.09 m³/min Sound level: 65 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Visit our store. We always have a wide range of new and used compressors in stock!

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MA0145_1375, Exhibit immediately available: New Kaeser Aircenter SK 16 - 8 bar screw compressor with integrated refrigeration dryer and 270 liters compressed air tank Control Sigma Control 2 Hodpfxsh Ey N Ue Aguen Year: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 9 KW Delivery quantity 7,5 bar: 1.61 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Visit our store. We always have a wide range of new and used compressors in stock!

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Hedpfxoywkc Ro Agusn Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Hardware Assembly Table – Emmegi BMF 3400 Year of manufacture: 2008 Table dedicated to hardware assembly for window and door frames. Complete with: Screwdriver Espagnolette system Hardware storage system Machine in working condition. 7) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 8) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 9) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 10) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 11) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 12) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 301 kW (409.25 HP), We offer a complete package of process vessels and key equipment forming part of an industrial ammonia refrigeration machine room, including one twin-screw compressor unit for -40°C operation, together with the main NH₃ vessels and auxiliary equipment, all manufactured in 2007. The set is suitable for industrial refrigeration applications including compression, oil cooling, intercooling, oil separation, liquid separation, condensation, liquid distribution, and oil collection. Hodjyrrpyjpfx Aguon Main equipment included: Twin-screw compressor unit GEA Grasso Duo-Pack PB-3A for -40°C operation — complete compressor package with two screw compressors mounted on a common frame. Technical data from the attachment include: refrigerant NH₃, refrigeration capacity 301 kW (with economizer), shaft power 2 × 104 kW, motor power 2 × 132 kW, speed 2940 rpm, evaporating temperature -40°C, condensing temperature +35°C, economizer temperature -22°C, dimensions 3830 × 2370 × 2300 mm, weight 6380 kg, suction connection 2 × DN 125, discharge connection DN 100, and oil charge 160 kg. Oil cooling system: ammonia thermosyphon. Control system: GSC Oil cooler for screw compressor unit, serial no. 170049, design pressure 23/23 bar, volume 96 / 70 dm³, temperature range 0/+60°C and 0/+100°C, working media ammonia / oil + NH₃. Economizer / intercooler vessel, serial no. 19103, allowable pressure 12 bar, volume 1000 dm³, temperature range -40/+100°C, working medium NH₃. Oil separator, serial no. 5281, design pressure 23 bar, volume 0.620 m³, temperature range +5/+110°C, working medium NH₃ + oil. Horizontal liquid separator, serial no. 19102, allowable pressure 12 bar, volume 3400 dm³, temperature range -40/+50°C, working medium NH₃. Evaporative condenser coil, serial no. H070979, design pressure -1/23 bar, volume 638 dm³, temperature range -20/+120°C, working medium NH₃, capacity 745 kW. Thermosyphon / liquid receiver, serial no. 19100, allowable pressure 18 bar, volume 620 dm³, temperature range +1/+100°C, working medium NH₃. Oil drain tank, serial no. 19104, allowable pressure 18 bar, volume 70 dm³, temperature range -40/+150°C, working medium oil + NH₃. The equipment is suitable for reuse in industrial refrigeration systems, retrofit projects, or as a source of high-value NH₃ machine room components, subject to technical verification and local compliance requirements. Important note: The installation is not dismantled, the potential buyer must include the costs of dismantling.

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Hodpfxoyif I Ue Aguen Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Location: Rieth Hodpfoyw Thvex Agujn

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator Hodpfxjmt Dcxj Aguen In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Year of construction: 2025, condition: new, Introducing the Xiros Mikro—a compact, bench-top Freeze Dryer engineered for efficiency and versatility. With an 8 kg ice capacity, it can extract up to 4 kg of ice from your products within 24 hours, making it ideal for small to medium batches. Key Features: - Adaptable Tray System: Comes standard with five electrically heated shelves; expandable up to nine to accommodate varying batch sizes. This flexibility allows you to process different quantities efficiently. - Candy-Pop Feature: The new Candy-Pop feature enables you to freeze-dry candies with just the touch of a button, simplifying the process for confectionery applications. - Customizable Processing: Offers manual and automatic modes, allowing you to program up to 16 unique steps for tailored drying recipes. This customization ensures optimal results for various products. - Efficient Design: Low-profile construction facilitates easy loading, while the stainless steel interior ensures durability and hygiene. The design also contributes to market-leading energy efficiency. - Advanced Vacuum Technology: Compatible with scroll dry vacuum pumps, ensuring low maintenance and quiet operation. This feature enhances the overall user experience by reducing noise and upkeep. - High-Quality Construction: Built with premium components for reliability and longevity. The innovative shelf-stack design improves temperature control accuracy by 60%, eliminating the use of adhesives and reducing out-gassing. - User-Friendly Interface: Features a 5-inch color touchscreen for easy monitoring and control, with USB connectivity for data logging and software upgrades. This interface simplifies operation and allows for seamless updates. - Warranty: CE certified and includes a 2-year commercial-grade warranty for peace of mind. This certification ensures compliance with global standards, and the warranty reflects the manufacturer's confidence in the product's durability. What’s Included - Xiros Mikro Freeze Dryer - Scroll Vacuum Pump - 5 tier shelf stack plus trays supplied as standard - Vacuum Hose - Clamps (set of 2) - Sealing Ring (set of 2) - Drain Hose (set of 2) - Quick Setup Card Features - Customizable Processing: With manual and automatic modes, program up to 16 unique steps to tailor your drying recipes to perfection. Store your customized settings at the touch of a button. - Efficient Design: The low-profile design facilitates easy loading, while the full stainless steel interior guarantees durability and hygiene. - Adaptable Tray System: Start with 5 electrically heated shelves and expand to a maximum of 9 shelves, providing flexibility for varying batch sizes. Hjdpfx Ajxxx I Ujgujn - Advanced Vacuum Technology: Recommended for use with a scroll dry vacuum pump, ensuring low maintenance and quiet operation. - High-Quality Construction: The full stainless steel interior and high-performance components ensure durability and hygiene, while the low-profile design makes loading a breeze. - Warranty: The Xiros Mikro is CE certified and comes with a 2-year commercial-grade warranty, providing peace of mind. - Market-Leading Ice Holding Capacity: Designed for larger batches or longer defrost intervals. - 24/7 Operation: Designed to run continuously around the clock. - Premium Components: High-quality and performance parts from leading suppliers, ensuring reliability. - High-Performance Vacuum Technology: Utilizes specialized vacuum technology fittings and connectors for maximum efficiency. - Ice Condenser Specific...

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Hjdpemt Dcqefx Agujn Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Hsdpfemt Dbhox Agujn Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger Hedpjmt Dcfofx Agujn In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Hjdpjygultjfx Aguen Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Year of construction: 2016, condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Hsdehgr Ihspfx Aguon Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Hjdpfx Agshgfnbjujn Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included Hsdpfx Aohg Rcxjguen the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications Hodpfx Aehgg Rrjguen 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2005, functionality: fully functional, volume flow: 1.8 m³/h, total width: 800 mm, total length: 1,000 mm, total height: 1,450 mm, pressure: 16 bar, overall weight: 300 kg, BEKO Drypoint RA300 refrigeration dryer 300m3/h, +3°C /ct1933/ Manufacturer: BEKO DRYPOINT Type: RA300 Year of manufacture: 2005 connection:dn80 pn16 Air delivery: 1800 m3/h, +3°C Operating pressure: 4-14 bar level-controlled BEKOMAT Hsdpfxst A Uwte Agusn condensat drain Enclosure size: 1000x800x1410 mm Weight: 275 kg

Condition: new, Year of construction: 2025, warranty duration: 12 months, water tank capacity: 300 l, type of input current: three-phase, total width: 2,360 mm, total length: 970 mm, total height: 2,030 mm, input frequency: 50 Hz, DPF Filter Regeneration Machine - MOTSLER SLR Premium The MOTSLER SLR Premium is a high-quality, reliable, economical, and very user-friendly machine designed for the professional cleaning of DPF, FAP, GPF, SCR, DOC, EURO6 filters, as well as catalytic converters. It supports all filter sizes—from passenger cars, vans, trucks, to construction machinery and equipment. The unit is entirely made of stainless steel and built using high-quality components sourced from leading Polish and European manufacturers such as Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, and Hager. The SLR Premium machine carries out the complete DPF cleaning process, which includes: initial measurement, cleaning, drying, final measurement, and concludes with a printed DPF cleaning report. Technical Specifications: - Device dimensions (L/W/H) [mm]: 2360 x 975 x 2031 - Chamber dimensions (L/W/H) [mm]: 1600 x 830 x 1090 - Machine construction: 304 stainless steel - Weight: 550 kg - Power supply: 3 x 400V 50 Hz - Max. power: 11 kW - Optimal power consumption: 6.9 kW - Circuit protection: 20 A - Tank capacity: 300 liters - Pump performance: 250 L/min - Hose diameter: 1.5” DN 40 - Water drain: 2” DN 50 - Drying temperature: 100 – 120°C - Water temperature: 10 – 50°C - Max. air flow (drying): 325 m3/h - Air pressure (drying): 300 mbar - Drying and cleaning: bidirectional manual Hedstrmriopfx Aguon - Contamination measurement: on dry and wet DPF filter - Filtration: 250 – 1 micron - Pre-filtration: 2 pre-filters - Filter replacement frequency: approx. every 40–100 cycles - Noise level: 70 dB - Min. ambient temperature: 3°C - Declarations of conformity: EC, CE Equipment: - Single-pipe SWS system - Professional PFS filtration system (cartridge replacement every 40–100 DPF filters) - 7” touchscreen display - Thermal printer for cleaning reports - Caster wheels - Adjustable leveling feet - Tempered glass windows - 2 cleaning hoses - 17 adapters for connecting DPF filters - 8 rubber seals for adapters - 4 DPF filter retainers - 4 adapter clamps - Inspection camera - Foam neutralizer - 2 pre-filters - Main filter cartridge - DPF CleanX cleaning fluid Equipment / Adapters: - All adapters for passenger cars and trucks - Set of rubber seals for adapters - DPF filter locks to prevent movement WHAT DISTINGUISHES THE SLR PREMIUM MACHINE? Build Quality: - Constructed entirely from stainless steel with components from leading European manufacturers: Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, ensuring top-tier precision. Single-Pipe SWS System: - All processes are conducted through one hose, eliminating the need to stop the machine, open doors, or reconnect the DPF filter between cleaning, drying, and measurement hoses. PFS Filtration System: - Multi-stage filtration system featuring two reusable stainless steel pre-filters and a main filter with a 4.8 m² area, supporting from 40 to 100 DPF filters per cycle. Side Ventilation: - Enables operation in low-ceiling spaces. Steam does not condense on the machine’s top, avoiding water ingress into electronics, electrical short circuits, or machine damage.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 39 h, power: 7.5 kW (10.20 HP), Elmag Profi-Line SILENT piston compressor PL-S 1100/10/270 - Compact unit incl. automatic condensate drain with connection accessories - Effective delivery rate 806 l/min - Suction capacity 1074 l/min - Max. Max. operating pressure 10 bar - Oil-lubricated Yes - Tank volume 270 l - Rated motor power 7.5 / 10 kW / PS - Electrical connection Voltage / frequency 400/50 V/Hz - Sound pressure level (4 m) 68 dB(A) - Compressor speed 1000 rpm - Air outlet 1/2 inch Hodsu Nhh Tjpfx Agusn - Length 1520 mm - Height 1530 mm - Weight 291 kg

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins Hsdpfxsygndpj Agusn General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. Hedpfx Ajd Atipogusn - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 25-50 kg/cycle - Electric demands: 0,6 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 710x800x2000 mm - Weight: 100 kg - Number of trays: 11pcs - Dimensions of trays: 570x570 mm - Drying surface: ~3,6 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. Requires minimal maintenance.

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy-saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below the dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation Hodpfxsd Atghj Aguon - with stainless steel shelves Specifications: - Performance: 50-100 kg/cycle - Electric demands: 1,2 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1420x800x2000 mm - Weight: 200 kg - Number of trays: 22 pcs - Dimensions of trays: 570x570 mm - Drying surface: ~7,2 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. It requires minimal maintenance.