Used Vertical Band Sawmill for sale (11,609)

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Kljdpfx Aasyug Hxjfsw The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces, 35x72) Rotary table adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter with full occupancy: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in the table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Klsdpfx Aozka Hieafew Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hours Spindle hours: approx. 5,000 hours Further technical data can be found in the attached documents.

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control system (PCU 50) was replaced in March 2024! The machine spindle was replaced after approximately 5,500 operating hours! TECHNICAL DETAILS Travel range X-axis: 800 mm Kedpfxezka Ako Aafslw Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool slots in the tool magazine: 30 MACHINE DETAILS Control system: Siemens 840 D Operating hours Control system operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling, 20 bar, with dual switching filter Documentation: Hedelius + Siemens Sinumerik Infrared probe: Renishaw

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: PR721523001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC-460, spindle speed (max.): 15,000 rpm, The new price of the machine was approximately €140,000 in 2023! No tools or a vise are included. However, these can be purchased separately upon request. TECHNICAL DETAILS Travel range X-axis: 1,300 mm Travel range Y-axis: 650 mm Travel range Z-axis: 600 mm Spindle speed: 15,000 rpm Main spindle servo motor Siemens: 20/53 kW Main spindle servo motor Fanuc: 15/30 kW Spindle taper: SK 40 Work table Table dimensions: 1,500 × 650 mm Table load: max. 1,200 kg T-slots: 18 × 5 × 100 mm Distance spindle to table surface: 150–750 mm Distance spindle center to Z-axis cover: 697 mm Rapid traverse X/Y axis: 36 m/min Rapid traverse Z axis: 36 m/min Working feed rate: max. 1–12,000 mm/min Feed motors X/Y/Z: 3.2/3.2/4.3 kW Torques of the feed motors X/Y/Z: 20/20/27 Nm Tool positions: 28 Tool length: max. 300 mm Tool diameter: max. 75 mm Kljdpfx Aezlh S Asafjw Tool diameter with free auxiliary positions: max. 125 mm Tool weight: max. 8 kg Tool change time: 1.6 s MACHINE DETAILS Control system: Heidenhain TNC-460 Accuracy without linear glass scales Positioning accuracy over the entire travel range: 0.012 mm Repeatability accuracy over the entire travel range: 0.008 mm Accuracy with linear glass scales Positioning accuracy over the entire travel range: 0.008 mm Repeatability accuracy over the entire travel range: 0.006 mm Cooling and power supply Coolant tank volume: 250 l Coolant flow rate: 40 l/min Mains voltage: 400 V ± 10 % Number of phases: 3 Mains frequency: 50 Hz Connected power: 85 kVA Dimensions and weight Dimensions (L × W × H): 4,025 × 3,090 × 3,185 mm Weight: 8,000 kg EQUIPMENT Direct drive Double-arm tool changer O-BLUM tool measuring system Lasercontrol NT O-BLUM workpiece measuring system TC50 Electronic handwheel (MPG) Thread drilling without compensation chuck USB interface CF card interface Ethernet interface HIWIN linear guides with roller guides in all axes HIWIN ball screws Directly driven main spindle NSK/FAG main spindle bearings Separate oil-air spindle cooling unit Fully enclosed tool changer for protection against chips Pneumatic intermediate tank for the tool changer as a backup in case of pressure drop Fully enclosed splash guard Separate air conditioning system for heat dissipation from the control cabinet Siemens electrical components Automatic, path- or time-controlled central lubrication system Kyarow telescopic covers in all axes Coolant system with adjustable nozzles as a coolant ring around the spindle Chip flushing system in the interior for optimal chip collection Spiral chip conveyor working in the Y-direction for removing chips from the machining area Rear chain chip conveyor

Condition: used, Year of construction: 2005, machine/vehicle number: 107.32.99.158, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, Re-auction due to buyer’s payment default! The machine spindle was replaced in July 2025! TECHNICAL DETAILS Travel range X-axis: 530 mm Travel range Y-axis: 450 mm Travel range Z-axis: 450 mm Kljdjziz Ncspfx Aafsw Rotary table Table diameter: 400 mm Table load capacity: 200 kg Swivel range: degrees Swivel speed: 20 rpm Rotational speed: 30 rpm Tool holder: SK40 Maximum speed: 12,000 rpm Recommended maximum working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force X and Y/Z: 5,000 N Magazine capacity: 30 Maximum tool diameter: 90 mm Maximum tool length: 250 mm (manual 350 mm) Maximum tool weight: 6 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 with digital control Positional tolerance according to DIN/ISO 230-2/97: 0.008 mm Machine weight: 6,500 kg EQUIPMENT RENISHAW MP 12 measuring probe Blum tool monitoring system

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 008078, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 630 mm, controller model: Fanuc O-M, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 850 mm Travel range, Y-axis: 550 mm Travel range, Z-axis: 630 mm Spindle mount: ISO40 Speed: 8,000 rpm Table surface area: 1,000 x 540 mm MACHINE DETAILS Control system: Fanuc O-M Tool changer magazine positions: 24 Weight: 5,500 kg Klsdpfx Aozi D Rpoafjw EQUIPMENT Electric handwheel Chip tray

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC426, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Ksdpfx Aszi D Rceafslw Travel range, Y-axis: 750 mm Travel range, Z-axis: 750 mm Table size: 1,150 x 700 mm Tool shank: SK40 Spindle speed range: 12,000 rpm MACHINE DETAILS Control system: Heidenhain TNC426 Machine weight approx.: 10,500 kg EQUIPMENT 30-position tool changer Electronic handwheel Chip conveyor Coolant system

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 179, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 803, rotational speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 510 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table size: 750 x 550 mm Spindle speed range: 8,000 rpm Spindle mounting: BT40 MACHINE DETAILS Control system: MSC 803 Weight: 4,500 kg EQUIPMENT Ksdpszi D E Tsfx Aafjlw 25-position tool changer Coolant system

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller model: Mitsubishi M70, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 500 mm Spindle mounting: SK40 Spindle speed: 12,000 rpm Spindle drive power: 7.5 kW Table clamping area: 2x 700x400 mm MACHINE DETAILS Control system: Mitsubishi M70 Tool changer magazine slots: 24 Weight: 6,600 kg EQUIPMENT Pallet changer Klsdpfxjzi D Eme Aafsw 4th axis (rotary table) 24-tool automatic tool changer IKZ (integrated coolant supply) Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 2,240 mm, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 800 mm, TECHNICAL DETAILS Cutting length: 5,300 mm Cutting height: 2,100 / 2,240 mm Cutting depth: 800 mm Saw blade diameter: 303 mm Dust extraction port diameter: 120 mm MACHINE DETAILS Motor power: 5.5 kW Total connected load: 5.5 kW Dimensions & Weight Footprint: 6,300 mm x 1,250 mm x 2,720 mm Weight: 1,200 kg EQUIPMENT Digital display in the Y-axis Center support Free-standing installation Folding slat grid Kodpfxozktnge Aafslw Wooden back panel

Condition: ready for operation (used), Year of construction: 2004, operating hours: 77,374 h, functionality: fully functional, machine/vehicle number: 419-01, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, controller model: Siemens 840D, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2021 (spindle operating hours approx. 7,300 h)! The machine underwent a major overhaul in 2013! The machine has been continuously serviced and repaired annually by the manufacturer and kept up to date with the latest technology (preventive maintenance). The last service was performed in January 2024. TECHNICAL DETAILS 4 axes Travel range X-axis: 6,000 mm Travel range Y-axis: 630 mm Travel range Z-axis: 550 mm Swivel range B-axis: ± 100° Spindle speed: 12,000 rpm Spindle torque: 140 Nm Rapid traverse rate in X/Y/Z: 60 m/min Chip-to-chip time vertical: 3.0 sec. (3.3 sec. DIN) Chip-to-chip time horizontal: 4.7 sec. (5.0 sec. DIN) MACHINE DETAILS Control system: Siemens 840D Power type: 3/N/PE Mains frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 220/24 V Connected load: 52 kVA Rated current: 75 A Fuse rating: 80 A Weight: 19,500 kg Operating hours: 77,374 h EQUIPMENT 5-axis milling package (simultaneous milling on up to 5 axes) Chip conveyor, discharge height: 1,050 mm Coolant through spindle (CTS) preparation Kledpfxozlnm Ho Aafow Vacuum rotating filter KNOLL VRF250 (steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with HD pump and servo valve Coolant nozzle per swivel field Emulsion mist extraction, 2 extraction fans at 800 m³/h each Rotating viewing window on the left and right (1,400 mm from the center of the machine) Automatic loading doors Center partition for pendulum machining 92 tool positions HSK-A63 (rear magazine) Blow-off air Tool life monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (states: machine on, machine running, piece counter) Marposs (Brankamp) collision monitoring CMS100 3D machine model for kinematic simulation in the CAM programming system Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per swivel field, clamping pressure control Linear clamping system KOHN 8 hydraulic clamping cylinders KOHN Multi 2000 MFS 125/680 HD Two-part grating floor for the operator across the entire operating width of 6,000 mm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, For sale is a complete stationary sawmill including a dust extraction system and a log infeed system! The new price for the sawing line alone was over €285,000! TECHNICAL DETAILS Klodpfx Aajzki Txofew Cutting length (max.): 3,600 mm Cutting width (max.): 400 mm MACHINE DETAILS Type of input current: Three-phase Year of last overhaul: 2024 EQUIPMENT Log deck LD1-20LH-3SLP-002 Incline chain conveyor 517100-slp2-002 Log turner 517180-SLP2-002 Wood Mizer set works control unit with chair and joystick controls TBS01 setworks First set of vertical saws TVSSC/002/2018 Outfeed conveyor TVSEH15S-SC3.6-SD-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Roller conveyor CR8.3.6H-SLP2-002 Roller conveyor with centralising bed CR8-3.6H-SLP2-002 Roller conveyor with air ram stabilising arms TVSEH15S-FT3.6 Second set of vertical saws TVSEH15S-FT3.6-SLP2-002 Flat chain conveyor with stabilising arms TVSEH15S-FT3.6-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Horizontal saw HR700EH15S-1-SLP2-002 Roller conveyor with cross transfer chains CR6.5.4H-P-SLP2-002 Transfer chain conveyer x 8 CC2-2.7H-4-P-SLP-002 Cross cut saw 00/19079 1.65-3.6 Dust extraction system with bag filter and blower unit into trailer.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Kjdpfszmryyex Aafslw TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant system with enhanced pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Machining system M8 cube B Traverse path: 1.020 mm x 830 mm (x, y), with tool changer 720 mm in Y • Feed: up to 22 m/min. • New Chip disposal concept; integrated central chip trolley • Complete cabin Coordinate table: Solid concrete polymer table with a steel frame, portal design with doubles -sided Y drive. • Z-stroke: 245 mm • Portal passage: 200 mm • Installation dimensions (without Terminal): 1.760 mm x 1.740 mm x 1.950 mm (Machine) • Drive system: digital servo drive; ball screw for every axis • Weight: approx. 1.300 kg Control DATRON next+ DATRON next - Option package: HF spindle, 3kWR0, HSK-E 25 R GMN HC80cg-40000, thread reducing clamp CNC Hand-held control unit B10-2 DATRON next Camera-Feature Kledpfozlbx Njx Aafsw Tool magazine 12-fold (HSK-E 25) DATRON Tool length probe incl. blow-off station, M8Cube 12-fold TC High-precision probe Z TP-R Vacuum distributor 2-fold Pro Vacuum pump, 250 cbm/h 3x400V, 32A, Vacuum plate with meander-formed slots 1000x700x30 mm (M8/ML/MXCube, M10 Pro)

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: - MAGELIS control system - for EVA-based hot-melt adhesives - Jointing: 2 × 1.5 kW, u = 12,000, 200 Hz - Cross-cut saws: 2 x 0.2 kW, automatic tilt 0°/3°, 2 carbide-tipped saw blades 140 mm - Flush milling: 2.07 kW, with WPL HF 70 heads, diameter 70 mm - Radius milling: R2 - Radius scraper blade Kljdpfezk Nt Eex Aafow - Surface scraper blade - Top glue tank - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8–42 mm - Minimum length: 150 mm - Edge thickness: 0.2–6 mm - Feed rate: 12 m/min - Extraction connection: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: at short notice Storage location: Baden-Württemberg

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, 5-AXIS MATSUURA MAM72-25V VMC Category: Vertical Machining Centers (VMC) Reference No.: 3651 Year of Construction: 2004 Technical Specification: SPINDLE Spindle Taper : BT 40 WORKING CAPACITY Travels (XYZ) : 550 x 410 x 450 mm Ksdpfx Aex Anlwsafjlw CNC Control : Fanuc 30i

Condition: like new (used), Year of construction: 2000, operating hours: 7,600 h, functionality: fully functional, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Category: Vertical Machining Centers (VMC) Reference No.: 311119 Capacity: 700 X 400 X 330 MM Year of Construction: 2000 Technical Specification: SPINDLE Spindle Taper : BT 30 Spindle Speeds : 8000 RPM Spindle Motor : 3.7 / 5.8 kW WORKING CAPACITY Travels (XYZ) : 700 X 400 X 330 MM Guideways : LM ATC Tool Change Capacity : 14 Tools CNC Kledpfx Aasx Ehi Iofow Control : Fanuc 16iM Additional Details: With Nikken 170 4th Axis

Condition: not inspected (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: UCP 1000, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens 828D, General specifications Control: Siemens 828D Weight: Approx. 10,100 kg Machine Type: 5-axis vertical machining centre Year of manufacture: 2001 M/C Model: UCP 1000 Power requirements: 3 Phase 400 V (100 A) Travel and movement X-axis: 1,000 mm Y-axis: 750 mm or 800 mm Z-axis: 750 mm or 800 mm Rapid traverse rate: 30 m/min Max. working feed: 10 m/min Spindle and tool changer Spindle speed: Max. 15,000 rpm Spindle taper: HSK-A63 Tool magazine: 60 stations Max. tool weight: 8 kg Max. tool length: 300 mm Table and axis NC rotary swivel table: Diameter 800 mm or 1,100 mm Table rotation speed: 12 rpm Max. workpiece weight: 1,500 kg Number of controlled axes: 5 Other features Spindle torque: 127 Nm (at 40% duty cycle) Axis force: 10,000 N (X and Y/Z) Coolant: Through spindle coolant available Kjdpfx Aoyz Tnwsafslw

Condition: refurbished (used), Year of construction: 1987, functionality: fully functional, turning diameter: 4,300 mm, faceplate diameter: 4,000 mm, Vertical Turning Lathe SC43 CNC, retrofitted and upgraded with CNC Fanuc 0𝑖-TF Plus Made in Romania by TITAN Year of manufacture: 1987 The machine was completely retrofitted in 2026 Main technical data: FACE PLATE DIA. MM 4000 MAX. SWING MM 4300 MAX HEIGHT UNDER THE CROSSRAIL MM 2000 MAX. LOADING ADMITTED KG 18,000 FACEPLATE SPEED RANGE 1-92 RPM FEEDS RANGE MM/ROT 0.05-5 CARRIAGE RAPID FEEDS MM/MIN 2500 MAIN D.C. MOTOR POWER KW 55 SIEMENS WITH SIEMENS DRIVER MACHINE WEIGHT APPROX. 63 TONS Kljdpey A Iifjfx Aafjw The machine has the following brand new components: - New electrical equipment with parts made by Schneider, Shrack, Siemens, with a new cabinet - New control panel - New micro switches - New hydraulic pump and components - New pump for guideway lubrication, and the entire installation was redone - New CNC Fanuc 0𝑖-TF Plus 55KW Main motor, Siemens, refurbished in 2018 with Siemens driver The main gearbox was checked and refurbished with new bearings. The machine was repainted. We grant a 6-month guarantee for parts. We can send more photos and a video showing the machine’s precision measurements. Do not hesitate to contact us.

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP Manufacturer: Berthiez (France) Kledpfx Aox A U Raoafew Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100KW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight: approx. 230 tons The machine is capable of both turning and milling operations. Do not hesitate to contact us for any additional information.

Condition: refurbished (used), Year of construction: 1977, turning diameter: 16,000 mm, faceplate diameter: 6,300 mm, year of last overhaul: 2026, Completely overhauled single-column vertical turning lathe, Blansko model SKSJ 1A, equipped with one vertical head for turning and milling operations. Technical specifications: Kedjzi S Tlspfx Aafslw Faceplate diameter: 6300 mm Maximum workpiece height: 4800 mm Max. turning diameter with column near the faceplate: 8000 mm Max. workpiece diameter: 14700 mm Max. workpiece diameter for internal turning: 16000 mm Infinitely variable faceplate rotation: 0.5 – 20 rpm Max. workpiece weight: 100 tons Milling spindle max. speed: 1500 rpm 2-speed gearbox with 15 kW Siemens motor Manual clamping, ISO 50 taper tool Machine weight: approx. 220 tons The machine was completely overhauled in 2025 and supplied with the following brand-new components: - New electrical cabinet made with CE-compliant components (Siemens, Schrack, etc.) - New Siemens 828 numerical control, 100 kW main drive motor, 27 Nm feed motors, and ZF reducers with a 1/5 ratio - New ballscrews on 2 axes (vertical head and crossrail) - New scales on 2 axes, Heidenhain - The hydraulic and support systems made with CE-compliant components (Rexroth, Brevini, Atos, etc.) - New lubrication system, DROPSA-Italy or similar For more information, please contact us.

Condition: good (used), NM-420 W30 Banding Machine This brand new machine is based on proven Western designs. Year of manufacture: 2025. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Klodpfx Aszmu H Ajafsw Technical specifications: Tape width: 30 mm Cycles per minute: 26 cycles/min Dimensions of the banded product: 400 x 200 mm The kit includes tapes and an instruction manual.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Controller MAX5 DSM (2 x 19" screens) Table size 762 x 406 mm X-axis travel 660 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 10 – 12000 rpm Tool magazine 20 positions Klodpjy Du I Rofx Aafow Tool holder SK40 Rapid traverse X/Y/Z 28 m/min Power 9,4/11 kW Footprint 2000 x 1800 x 2600 mm Machine weight 2850 kgs Accessories - Software options: 3D, DXF, AVG (realistic graphics), pockets/islands, ramp function, rigid tapping, cutting, tool and material database, NCPP and ISNC (macro ISO code programming), Ultimotion - MPG - Coolant water system - Chip auger - Signal light - Machine feet

Condition: good (used), Year of construction: 1992, functionality: fully functional, Manufacturer: BOSCH Tip: SVZ 2500 A Maximum bag length: 400 mm Minimum bag length: 100 mm Klodpforrv T Iox Aafjw Maximum bag width: 250 mm Minimum bag width: 90 mm Maximum output: 80 bags/min

Condition: used, Make: MÖSSNER record Type: SSF /950 Kedovtyv Hjpfx Aafelw Design: 950mm Table size: 800x750mm