Used Sharpening Machine Weinig Rondamat 929 for sale (64,839)

Condition: used, grinding wheel diameter max. 225 mm diameter of tools max. 300 mm tool diameter min. 80 mm Podpfjlf H Tgsx Aggopw Weinig Rondamat 929 knife grinding machine for manufacturing profile knives. Production from a straight blank or regrinding of used knives using a template. Max. tool width: 230 mm Includes new coolant pump.

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Pjdpfxeq Dzi Te Aggopw Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Pjdpsxiv Ugsfx Aggopw Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Psdpfx Ajxlfwpjggspw Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Ppedpoxligujfx Aggsw Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: used, Sharpening machine for circular saws/rip saws IDL000829 Ppodpfx Asvlczveggew - manufacturer: IMW

Condition: good (used), Year of construction: 2001, For inquiries: Zoltán Utasi Plus 36 30 205 7380 Grinding of planer knives (conventional and hydro tools, as well as profile knives – profile knives ground based on templates) Machining length: 240 mm Tool diameter: 100–230 mm Grinding wheel diameter: 150–225 mm Grinding wheel width: 2–3–4–10 mm Relief angle: 15–35° Side angle: 0–10° Coolant tank: 50 L Ppsdpfx Agjy Nmuyegow Total electrical power: 2 kW Spindle diameter: D40 and D50 mm Infinitely variable speed control for grinding wheel: 1000–3000 rpm Accuracy: within 0.005 mm Motorized lateral feed Liquid-cooled system Equipped with profile copying unit Accessories included (grease pump, knife holder, grinding wheel, dressing tool with tracing pin, template holder) This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, functionality: fully functional, Weinig Rondamat 960 PowerLock cutterhead grinding machine Max. tool width: 240 mm Grinding wheel diameter: 150 – 225 mm Spindle speed, adjustable via frequency inverter: 1500 – 3000 rpm Angle adjustment – radial on the knife back: 10 – 30° Lateral adjustment in manual mode: 0 – 20° Ppsdpfx Agezhbruegsw PowerLock tool clamping system This precision knife grinding machine is designed for: – Sharpening and manufacturing profiled knives from solid material according to a template – Re-sharpening straight planing knives in a cutterhead

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ppedpfx Aeyr Rnzeggjw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2015, WEINIG - Rondamat 1000 CNC High-precision knife grinding machine - Automatic data import of CNC programs from the Moulder Master - Fully automatic sharpening and production of profile knives from a solid blank - Fully automatic re-sharpening of straight planer knives and profile knives in the cutterhead Grinding of planer knives in the cutterhead with standard knife projection is possible. Ppjdeyzaz Rspfx Aggjw Used machine Rondamat 1000 Year of manufacture: 2015 Grinding unit: Robust spindle carrier with precise guides for concentricity accuracy under 0.005 mm Motorized radial adjustment for various grinding wheel diameters Back relief angle fully automatically adjustable Lateral relief angle fully automatically adjustable Grinding spindle with HSK interface for fast, repeatable grinding wheel changes and high concentricity accuracy. In combination with the grinding wheel magazine, the wheel change can be carried out automatically. HSK 50 F Grinding wheel diameter min./max. 150/200 mm Grinding wheel width (Borazon, diamond) 2-3-4-10 mm Grinding wheel bore 60 mm Grinding spindle drive 1.5 kW Grinding spindle speed, frequency-controlled 1500-3000 rpm Relief angle grinding: - radial, on knife back 10°-30° - lateral depending on the profile contour 0-20° Accessories: 3 grinding wheel holders for grinding wheel diameter 200 mm LED light for the machine interior Extras: Automatic grinding wheel measurement via optical measuring system for positioning the grinding wheel on the grinding support Measurable diameter min. - max. 145-200 mm Automatic tool changer for changing grinding wheels between profiling and finish grinding - 3 magazine slots Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, B 151 - radius 2 mm Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, No. 930062010, B 46 - radius 1 mm, finish grinding Grinding wheel, Borazon, for straight grinding in HSS and Stellite, wheel diameter 150 mm, No. 920072015, B 126 - width 10 mm, rough grinding 3 additional grinding wheel holders - HSK spindle for grinding wheel diameter 200 mm Coolant system: Top cooling via plastic articulated hose and from below via the knife support directly at the grinding point prevents overheating of knives even with high stock removal Dosing of coolant flow via a central distributor with stainless steel ball valves Automatic coolant cleaning through a conveyor filter system Soiled filter paper is automatically removed Coolant tank approx. 70 l Coolant additive 5 l Coolant pump motor 210 watts Tool holder: System "PowerLock" 360 For grinding PowerLock tools and large-bore tools - Max. tool weight 80 kg - Tool holder with manual HSK quick-clamping system - Spindle can be switched for right and left tools - Max. tool width 360 mm - Max. tool cutting circle 300 mm - Min. tool cutting circle 90 mm - incl. PowerLock adapter for mounting conventional tools, shank diameter 40 mm Additional HSK clamping unit Additional part fixture Automatic processing of two tools in one operation.

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Pjdpfx Aew Np Uujggjpw Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, Stehle HK 630 (semi-automatic straight knife grinder). Specification: • Maximum tool width 630 mm !!! • Tool diameter planer heads (min-max knife heads) 120 - 340 mm Pedpfxev T Rkhj Aggspw • Grinding wheel spindle speed 2850 rpm • Grinding wheel drive 1,1 kW • Clearance angle 10 - 35° • Coolant tank 28 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 10002045, Weinig Rondamat from 2020, in very good condition. Pedpfx Ajzi D Iusggepw

Condition: used, Year of construction: 1982, I have a Weinig Rondamat 930 tool grinder, manufactured by the German company Weinig, for sale. The machine is in full working order. The stated price is for export in Poland, plus 23% VAT. Podszhipbspfx Aggjpw Transportation is the responsibility of the buyer.

Condition: used, Year of construction: 2008, machine/vehicle number: 112051, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, Weinig Rondamat 960 Powerlock (automatic straight knife grinder and profiling grinder) The specifications are as follows: Weinig Rondamat 960 Powerlock / HSK profiling grinder. High-precision knife grinder for sharpening straight knives and profiling using a template. Sharpening of straight knives in a cutter block. Hand-held grinder for profiling and straight grinding. Abrasive wheel diameter min./max.: 150 mm / 225 mm Abrasive wheel width: ceramic 5 mm, borazon 10 mm Abrasive wheel bore: 60 mm Tool circumference min./max.: 100 mm / 300 mm Tool width max.: 240 mm Abrasive wheel drive: 1.1 kW Spindle speed: 1700/2000/2400/3000 rpm Clearance angle: Radial: (rear) 10 - 30 degrees, Axial: 0 - 20 degrees For rotating heads up to 60 degrees Ppsdpfx Agozg Ut Negow Coolant tank approx. 50 liters Table feed: 0 - 240 mm Electrical connection approx. 2 kW POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick-change system. Radial table mounting with precise adjustment. Max. tool width 240 mm.

Condition: used, consisting of: decorative film + aluminum support plate + printed circuit board. Ppedpslkch Ssfx Aggsw new decorative film (manufactured in 2019), control panel 23 001 0078, identification no. 10017781 / 912053002, used original printed circuit board, cleaned and tested, used original aluminum support plate, cables available upon request.

Condition: new, Diameter: 150 mm Pedjvl Hy Aspfx Aggspw Manufacturer No.: 920 072 005 Grit: D 126 900819 Grinding wheel for Weinig Rondamat or similar sharpening machines.

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Main cutting edges up to 25° Motor 1, 1 kW Psdpfx Aeufcnqeggopw

Condition: excellent (used), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, Machine for the automatic sharpening of straight knives in planing heads • Automatic indexing Psdpfx Agjwvql Njgjpw • Planer head diameter min. 85 mm to max. 225 mm • Max. tool length 330 mm (table stroke 440 mm) • Unlimited number of cutting edges • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4,000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2,850 rpm • Feeding motor 0.053 kW, n=1,300 rpm • Grinding feed rate 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable grinding passes per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2,900 rpm • Coolant / tank capacity approx. 115 liters • Mounting arbor D=50 x 330 mm • Machine complete with accessories Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function tested = AS NEW condition Price: On request Payment: Prior to handover/loading Inspection: At any time by prior arrangement Subject to error and prior sale

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Ppjdpfxexiv S Eo Aggow

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Auction of a Weinig finger jointing machine! Ppodpfxex Rbl Ns Aggjw

Condition: new, Year of construction: 2026, Yanigav AP350 Sharpener Ppjdpfjr Ezfdjx Aggsw • Weight: 750 kg • Drive: Hub drive PTO • Maximum opening: 350 mm • Cylinder stroke: 750 mm • 4 adjustable sharpening angles • Blade holder with polyamide bushings • Pedal-operated for left- and right-handed use

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2967, Vollmer VWM40U fully working, installed frequency converter for banding speed adjustment, and foot switch to easy using, if you need more pictures or video please contact me in viber or whatsapp Psdsxp N Nwepfx Aggspw

Condition: excellent (used), Year of construction: 1993, Vollmer CBF 40 H surface grinding machine. Pedpfozn Hawex Aggopw

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Podpfx Agjwd N Daogjpw Various tooth shapes available Operating instructions included Feed rate 30 or 60 teeth per minute