Used Wadkin 360Mm Kein Weinig Rondamat for sale (826)

Condition: used, Sharpening machine for profile cutters and straight grinders. . Grinding interlocked in 2 axes. Very easy to operate. Width of the tool max: 360mm Maximum cutting circle 350mm profile 300mm straight Minimum cutting circle 70mm Ppodonzkx Sspfx Akrsr Main motor power kW: 1.5 at 3000 rpm at 50 Hz. Wet grinding: Yes

Condition: excellent (used), WADKIN SILHOUETTE STRAIGHT AND PROFILE GRINDER TWIN GRINDING HEAD:  A CENTRAL DESIGN FEATURE THAT ALLOWS FOR EXTREMELY FAST CHANGES BETWEEN PROFILE GRINDING AND STRAIGHT KNIFE GRINDING OR RESHARPENING. CAPACITY:  IT FEATURES A FULL 300 X 350MM GRINDING CAPACITY. PRECISION TOOLING:  USES A UNIQUE TURRET HOLDER THAT CAN HOLD UP TO SIX STYLI, ALLOWING FOR QUICK SETUP ACROSS VARIOUS WORK TYPES. ADJUSTABILITY:  THE TEMPLATE SLIDE INCLUDES COARSE AND FINE ADJUSTMENT VIA DIAL INDICATORS FOR HIGH-ACCURACY POSITIONING. Ppsdpfx Ajyxxgmskror COMPACT DESIGN:  BUILT WITH SPACE-SAVING FEATURES TO FIT INTO SMALLER TOOLROOMS WHILE MAINTAINING THE ACCURACY OF LARGER AUTOMATIC MACHINES. INCLUDED: 40MM OR 50MM ARBOR AS NEEDED OPTICAS SETTING STAND

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale. Ppsdeq Dzi Tspfx Akrer

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Weinig Rondamat 980 Year 2010 Technical data: Max. tool width: 330 mm With PowerLock: 322 mm Tool flight circle: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed frequency-controlled: 1500 - 4600 rpm Podjwvvylepfx Akrjpr Grinding spindle drive: 1.5 kW

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Main cutting edges up to 25° Motor 1, 1 kW Pedpfoufcnqex Akrspr

Condition: excellent (used), WEINIG RONDAMAT 960 POWERLOCK (AUTO STRAIGHT KNIFE GRINDER AND AUTO PROFILE GRINDING) MIN./MAX. TOOL DIAMETER 100 / 300 MM MAX. TOOL WEIGHT 80 KG MOUNTING ARBOR DIAMETER BY CHOICE CLEARANCE ANGLE - RADIAL AT KNIFE BACK 10 - 30° - LATERAL IN MANUAL OPERATION 0 - 20° - STRAIGHT CUTTER HEADS 60° MIN./MAX. GRINDING WHEEL DIAMETER 150 / 225 MM GRINDER SPINDLE DRIVE MOTOR 1.1 KW (1.5 HP) GRINDING SPINDLE SPEED FREQUENCY CONTROLLED 1,500 - 3,000 RPM CARBIDE KNIFE GRINDING OPTION STRAIGHT CUTTER HEAD GRINDING (AUTOMATIC) TOTAL CONNECTED LOAD 2 KW (2.7 HP) “STRAIGHT AND PROFILE CUTTER HEAD GRINDING, AUTOMATIC” PACKAGE QUICK AND PRECISE AUTOMATIC RESHARPENING OF Pedpfoyz Rfyox Akrjpr STRAIGHT KNIVES IN THE HEAD, ESPECIALLY WITH A HIGH NUMBER OF TEETH. WITH AUTOMATIC DIVIDING HEAD FOR UP TO 16 TEETH. COMFORT PACK.

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg Ppedpfsyr Rnzjx Akrsr - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, total height: 1,600 mm, total length: 1,300 mm, total width: 1,500 mm, Empty weight: 900 kg Pjdpfeytbc Ssx Akrepr Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 108088 - Motor power: 1.0kW - Transport dimensions: 1300mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, grinding length: 240 mm, type of input current: three-phase, working width: 240 mm, Weinig Rondamat 925 Year of manufacture: 1996 Maximum tool width: 240 mm Grinding wheel diameter: 150-225 mm Grinding wheel bore: 60 mm Pjdpey Azaqsfx Akrspr Tool diameter: 100-230 mm

Condition: like new (used), Year of construction: 2010, 🔧 Weinig Rondamat 960 Powerlock / HSK + Opticontrol + CNC For sale: high-precision profile knife grinder Weinig Rondamat 960 Powerlock / HSK, equipped with Opticontrol + CNC. The machine is designed for grinding straight knives and profile grinding using templates. It allows grinding of knives mounted in cutterheads as well as manual profile and straight grinding using a hand-held unit. ⚙️ Technical specifications: • Grinding wheel diameter (min./max.): 150 / 225 mm • Grinding wheel width: ceramic 5 mm, borazon (CBN) 10 mm • Grinding wheel bore: 60 mm • Turning diameter (min./max.): 100 / 300 mm • Max. tool width: 360 mm • Grinding wheel motor power: 1.1 kW • Spindle speeds: 1700 / 2000 / 2400 / 3000 rpm 📐 Angle adjustments: • Radial (back) angle: 10 – 30° Ppedpjxlk Nqsfx Akrer • Axial angle: 0 – 20° • Swivel head: up to 60° 💧 Equipment & connections: • Coolant tank: approx. 50 liters • Table travel: 0 – 360 mm • Electrical connection: approx. 2 kW • Pneumatic connection: 5 bar • Voltage: 380 V / 50 Hz 📄 Complete documentation included. 👉 Ideal for woodworking shops, tool rooms, and industrial use. 👉 Accurate and reliable machine, ready for operation.

Condition: good (used), WEINIG RONDAMAT 912 TOOL SHARPENING MACHINE FOR FULLY-AUTOMATIC SHARPENING OF STRAIGHT KNIVES. SPECIFICATIONS: MAX. WORKING WIDTH: 260 MM MIN. TOOL DIAMETER: 80 MM MAX. TOOL DIAMETER: 280 MM AUTOMATIC INDEXING: Z 1 TO Z 36 ADJUSTABLE CLEARANCE ANGLE, RADIAL: 15 – 35 DEGREES ADJUSTABLE CLEARANCE ANGLE, AXIAL: 0 - 15 DEGREES GRINDING WHEEL BORE: 20 MM GRINDING WHEEL DIAMETER: 125 MM/150 MM GRINDING WHEEL SPEED: 4600 RPM AUTOMATIC GRINDING WHEEL ADJUSTMENT NO. OF GRINDING CYCLES: 01-09 MAX. GRINDING SPEED, STEP-LEES ADJUSTABLE TO MAX. 530 MM/MIN TOTAL POWER: 2 KW GRINDING ARBOUR DIAMETER: 50 MM GRINDING WHEEL ADAPTOR 1 COOLANT THANK WITH PUMP Poder A A T Sepfx Akropr

Condition: excellent (used), TOOL SHARPENING MACHINE FOR FULLY-AUTOMATIC SHARPENING OF STRAIGHT KNIVES TECHNICAL DATA MAX. TOOL WIDTH: 330 MM EXTENDED (OPTIONAL): 460 MM WITH POWERLOCK: 322 MM TOOL RADIUS: 100 - 300 MM EXTENDED (OPTIONAL): 140 - 340 MM WITH POWERLOCK: 100 - 250 MM Ppedeyw Ixpspfx Akrsr SANDING DISC DIAMETER: 125 - 200 MM SPINDLE RPM: 4600 RPM FREQUENCY CONTROLLED: 1500 - 4600 U/MIN

Condition: used, Year of construction: 2015, WEINIG - Rondamat 1000 CNC High-precision knife grinding machine - Automatic data import of CNC programs from the Moulder Master - Fully automatic sharpening and production of profile knives from a solid blank - Fully automatic re-sharpening of straight planer knives and profile knives in the cutterhead Grinding of planer knives in the cutterhead with standard knife projection is possible. Pjdpfxjyzaz Rs Akropr Used machine Rondamat 1000 Year of manufacture: 2015 Grinding unit: Robust spindle carrier with precise guides for concentricity accuracy under 0.005 mm Motorized radial adjustment for various grinding wheel diameters Back relief angle fully automatically adjustable Lateral relief angle fully automatically adjustable Grinding spindle with HSK interface for fast, repeatable grinding wheel changes and high concentricity accuracy. In combination with the grinding wheel magazine, the wheel change can be carried out automatically. HSK 50 F Grinding wheel diameter min./max. 150/200 mm Grinding wheel width (Borazon, diamond) 2-3-4-10 mm Grinding wheel bore 60 mm Grinding spindle drive 1.5 kW Grinding spindle speed, frequency-controlled 1500-3000 rpm Relief angle grinding: - radial, on knife back 10°-30° - lateral depending on the profile contour 0-20° Accessories: 3 grinding wheel holders for grinding wheel diameter 200 mm LED light for the machine interior Extras: Automatic grinding wheel measurement via optical measuring system for positioning the grinding wheel on the grinding support Measurable diameter min. - max. 145-200 mm Automatic tool changer for changing grinding wheels between profiling and finish grinding - 3 magazine slots Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, B 151 - radius 2 mm Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, No. 930062010, B 46 - radius 1 mm, finish grinding Grinding wheel, Borazon, for straight grinding in HSS and Stellite, wheel diameter 150 mm, No. 920072015, B 126 - width 10 mm, rough grinding 3 additional grinding wheel holders - HSK spindle for grinding wheel diameter 200 mm Coolant system: Top cooling via plastic articulated hose and from below via the knife support directly at the grinding point prevents overheating of knives even with high stock removal Dosing of coolant flow via a central distributor with stainless steel ball valves Automatic coolant cleaning through a conveyor filter system Soiled filter paper is automatically removed Coolant tank approx. 70 l Coolant additive 5 l Coolant pump motor 210 watts Tool holder: System "PowerLock" 360 For grinding PowerLock tools and large-bore tools - Max. tool weight 80 kg - Tool holder with manual HSK quick-clamping system - Spindle can be switched for right and left tools - Max. tool width 360 mm - Max. tool cutting circle 300 mm - Min. tool cutting circle 90 mm - incl. PowerLock adapter for mounting conventional tools, shank diameter 40 mm Additional HSK clamping unit Additional part fixture Automatic processing of two tools in one operation.

Condition: new, Diameter: 150 mm Pjdpovl Hy Aofx Akrjpr Manufacturer No.: 920 072 005 Grit: D 126 900819 Grinding wheel for Weinig Rondamat or similar sharpening machines.

Condition: used, consisting of: Decorative foil + aluminium support plate + circuit board. new decorative foil (manufactured in 2019), control panel 23 001 0078, Ident-No. 10017781 / 912053002, used original circuit board, cleaned and tested, used original aluminium support plate, cable on request. Ppodpfolkch Sox Akrer

Condition: used, grinding wheel diameter max. 225 mm Podpfolf H Tgox Akrjpr diameter of tools max. 300 mm tool diameter min. 80 mm Weinig Rondamat 929 knife grinding machine for manufacturing profile knives. Production from a straight blank or regrinding of used knives using a template. Max. tool width: 230 mm Includes new coolant pump.

Condition: excellent (used), functionality: fully functional, Head Grinder Rondamat 925 + Weinig CAM 970 1. Rondamat 925 Grinding wheel diameter: 150-225 mm Grinding wheel width: - ceramic: 5 mm - borazon: 10 mm Grinding wheel bore: 60 mm Tool diameter: 100-230 mm Ppjdpfx Akjxyynxjrjr Tool width up to 240 mm 2. CAM 970 Tool measuring system

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Ppodpfx Aksw Np Uujror Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Ppsdpsxiv S Ejfx Akror

Condition: excellent (used), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, Machine for the automatic sharpening of straight knives in planing heads • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm • Max. tool length 330 mm (table stroke 440 mm) • Unlimited number of cutting edges • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4,000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2,850 rpm • Feeding motor 0.053 kW, n=1,300 rpm • Grinding feed rate 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable grinding passes per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2,900 rpm • Coolant / tank capacity approx. 115 liters • Mounting arbor D=50 x 330 mm • Machine complete with accessories Ppsdpfxewvql Ne Akrjr Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function tested = AS NEW condition Price: On request Payment: Prior to handover/loading Inspection: At any time by prior arrangement Subject to error and prior sale

Condition: good (used), Weinig Rondamat R960 Pjdpfx Aewzu N Ajkropr Year of manufacture: 2002

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Unimat 500 Working width: 230 mm Working height: 120 mm Number of spindles: 5 Spindle configuration: Podjy E Sizjpfx Akrepr Bottom Right Left Top Bottom Feed speed adjustable via inverter up to 30 m/min Feed motor Drive through cardan shafts Pneumatic pressure rollers 3 axes controlled from the control panel (width, height, pressure roller position) CE certificate DTR documentation

Condition: used, Year of construction: 1996, functionality: fully functional, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, height adjustment type: electric, type of input current: three-phase, input voltage: 400 V, table length: 1,970 mm, number of spindles: 5, extraction connection diameter: 140 mm, Equipment: cabin, - German-made - grooved table - year of manufacture: 1996 - feed rollers integrated in the table TECHNICAL SPECIFICATIONS: - planing width: 230 mm - planing height: 160 mm - grooved table - spindle diameter: 40 mm 1st lower spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th lower spindle: 7.5 kW Ppjdpfsy Hq Hnex Akror - feed speed continuously variable: 6-36 m/min - feed motor power: 5.5 kW - six upper steel feed rollers - two upper rubber feed rollers - three feed rollers integrated into the table - pneumatic feed pressure - pneumatic shoe pressure - spindles with brakes - infeed table length: 1970 mm - electric height adjustment - central lubrication (split) - extraction port diameter: 140 mm Machine dimensions: - (length / width / height): 410x200x180 cm - weight approx. 3000 kg

Condition: excellent (used), Weinig Profiamt 22N four-sided planer Working width 230mm Psdpfx Akjv If I Deropr Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Right 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed regulated by means of a variator 6-22m/min Feed motor 2.2kw Automatic lubrication of the worktop Air cushion in the worktop Length of the material insertion table 1970mm

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Profimat 22N Working width: 220 mm Working height: 120 mm Number of spindles: 6 Spindle arrangement: Bottom – 4 kW Ppsdpfxsxzbn Nj Akror Right Left – 5.5 kW Top – 5.5 kW Bottom – 4 kW Universal – 4 kW Feed speed adjustable via variator: 6–22 m/min Feed motor power: 3 kW Spindles with adjustment