Tool cutter

Mammon M.100 NC mit TNC 124 Haidenhain

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions Podpfx Asw A Ap Hofhepl

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 838 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (min.): 50 rpm, quill travel distance: 127 mm, table width: 299 mm, table length: 1,245 mm, overall weight: 1,000 kg, input voltage: 400 V, warranty duration: 6 months, Rebuilt Bridgeport Milling Machine 2HP Variable Speed Fully Rebuilt Head And Machine Table has been reground on 3 Sides Bed ways have been reground and re scrapped in Brand New Lead Screws imperial X & Y & Z New Lead screw bushes imperial X, Y & Z Ppsdew Id U Hepfx Afhsl Table Size 42” X 9” 50-4200rpm Brand New X Axis Powered Traverse Brand New Y Axis Powered Traverse Brand New 2 Axis Digital Readout ( X & Y Axis ) Brand New Coolant Pump & System Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray Power - 3 Phase 400v (original wiring & Motor Pre CE) Comes with a techno piu machine safety guard fitted as shown in the photo which is interlocked Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new shafts, new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Psdef Ey Auepfx Afhspl Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Pole-changing motor: 0.8/1.5 kW Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device - Free-cutting function - LED lamp

Condition: good (used), Year of construction: 1998, functionality: fully functional, Universal tool milling machine Product: MACMON Type: M 100 ADR Technical Data: - Heidenhain TNC124 control - Machine number: 7989 - Year of manufacture: 1998 - Travel: X 310 mm Y 170 mm Z 330 mm - Speed range: 40-2500 rpm (infinitely variable in 2 ranges) - Feed rate: 10-800 mm/min (infinitely variable) - Rapid traverse: 800 mm/min - Equipment: Vertical & horizontal spindle (incl. lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW Ppedpfx Afsrwml Aehjl - Weight: approx. 750 kg - Space requirement: 1000x1160x1400 Incl. complete documentation The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 270 mm z-travel 430 mm 630 mm table-size 1120 x 270 mm spindle turning speed range 45 - 1660 U/min spindle taper SK 40 control konventionell spindle motor 2,2 kW Ppedpfx Ajv Sdz Refhol total power requirement 2,4 KVA weight of the machine ca. 1,35 t dimensions 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet

Year of construction: 1981, condition: good (used), Lid FP1 2-axis active milling machine with Heidenhain digital display, angular table. SK 40 spindle holder. Good working condition. Machine ready for demonstration under power by arrangement. Ppsdpfx Afjhg Embohjl

Condition: excellent (used), x-travel 450 mm y-travel 175 mm z-travel 400 mm spindle turning speed range 60 - 2800 U/min weight of the machine ca. 1 t dimensions of the machine ca. 1,1 x 1 x 1,5 m Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand Psdjvwgn Dopfx Afhjpl

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30000452, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill travel distance: 60 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 600 mm, table width: 210 mm, overall weight: 710 kg, table load: 200 kg, Equipment: documentation/manual, DECKEL FP1 – completely overhauled in 2012 by FPS (Germany), equipped with Heidenhain digital display, tool cabinet with accessories, and dividing head. Since the overhaul, the machine has seen very light use and is therefore in like-new condition. About FPS: Specialized in the complete refurbishment of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Overhauled (2012) – mechanically and electronically as new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For additional photographs and videos of the machine in operation, please contact us. Description: Pjdsxywhcepfx Afhopl This high-quality DECKEL FP1 milling machine has been completely refurbished, with both mechanical and electrical components upgraded to the latest standards. A new CE-compliant control cabinet was installed in accordance with current statutory requirements (BGVA 3 / DIN-EN 60204-1, new machinery standard). During the overhaul, the control system, drive package, and drive motors were all replaced and brought up to date. The modernization also included the installation of a new, touch-safe control panel and new motor. Technical data: Operation: manual, with option for automatic positioning Control: 3-axis Heidenhain digital readout Spindle speed range: 40 – 2000 rpm (geometrically stepped, 16 speed stages) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: Vertical & horizontal extension 60 mm, SK40 Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg incl. angle table and milling head Footprint: 1600 x 1400 x 1750 mm (W / D / H) Equipment: Vertical and horizontal spindle Milling head manually swivels ± 90° Completely new electrics and drive packages Overhauled – mechanically and electronically as new Extras: Z-axis bellows Special paintwork Highlights: Heidenhain digital readout for precise operation During overhaul, entire control system, drive package, and drive motors were renewed Contact us to arrange a viewing appointment.

Condition: reconditioned (used), Deckel FP1 AKTIV (3-Axis Active) Machine No. 2102-5745 Year of manufacture: approx. 1988 Travel distances: X-axis: 300 mm Y-axis: 150 mm Z-axis: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Ppsdpoxpwfgjfx Afhjl Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - HEIDENHAIN 3-axis active digital readout, type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and extends horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Centralized lubrication Space requirements (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry measurement videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring length 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Centralized lubrication checked - Heidenhain digital readout overhauled - New wiper set installed - LEDs in the Active display replaced - Oil changed - Vertical milling head fitted with new bearings - Oil sight glass replaced Net price, ex stock, free loaded

Condition: used, Year of construction: 1999, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 50 - 2600 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 5,5 kW weight of the machine ca. 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, Ppodpfxswngkrj Afhsl DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant