Travelling column milling machine

Mecof Performa

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Gksdpfxjzv Syfo Ap Dsc Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm Gkjdpfx Apszgcp Ss Doc X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition Gkodothuzpspfx Ap Djc

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Gkodpjh Tnpxefx Ap Dec

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 1000 x 560 mm Spindle taper SK40 Spindle speeds -10'000 rpm Gksdpfjzbrrtjx Ap Dsc Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Coolant through spindle 3D measuring tracer Tool lenght measuring device Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 8.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. Gsdpfx Asxx A Ewsp Djkc coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: good (used), Tool holder VDI 30 Godpfsww Hlusx Ap Dskc

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor - Electronic handwheel - Compressed air through the spindle Godpfxsvtz Dxe Ap Djkc - 30-position tool holder package - Complete 24-position tool equipment - Initial filling of coolant lubricant - Installation-commissioning-training - Guarantee up to 5 years possible HAITIAN European branch Ebermannsdorf

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h - Programme run: 31.645 h - Spindle running time: 26.813 h TECHNICAL DATA Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Gsdpfx Apoyry Rfj Dskc Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Detailed technical data sheet and information on equipment available on request.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, The used DIAMOND SJ 22 2-axis cnc lathe is a fast CNC lathe with an inclined bed and 2-axis flat guideways of medium size, and it is equipped with FANUC 0i-TC cnc, year of construction 2007, "CE" standard. Main features: X-axis travel 280 mm Gkedpfx Aet N Upvsp Djc Z-axis travel 360 mm 45 mm Spindle: max. rotational speed 6,000 rpm Spindle motor power 7.5Kw Stations on turret 12 pos. Hydraulic tailstock with in-cycle quill, chip conveyor evacuation conveyor, set of tool holders, 250mm 3-jaw chuck with related jaws, and user and maintenance manuals complete the equipment.