Used 5 Axis Vertical Machining Center for sale (99,951)

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Cgedpfxjzavyfj Apaou

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Cjdpfx Apey Diabsaogu

Condition: excellent (used), Year of construction: 2004, operating hours: 7,987 h, functionality: fully functional, travel distance X-axis: 1,120 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: 160 is-MB, table width: 500 mm, table length: 500 mm, table load: 400 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 7,979 h, spindle motor power: 22,000 W, spindle nose: SK 40, number of slots in tool magazine: 30, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Japanese-built high-speed machining center with full 5-axis simultaneous capability, in excellent condition with 29,000 power-on hours and only 7,900 spindle hours (as the spindle was overhauled by the manufacturer a few years ago), complete with: remote electronic handwheel; high-pressure through-spindle coolant; chip conveyor; random tool changer; laser tool inspection system; RENISHAW MP 10 wireless part probe; FANUC high-speed package; network interface; serial interface; memory card. Cgedpjx H Tx Hjfx Apasu

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 460, rotational speed (max.): 15,000 rpm, spindle nose: HSK 63A, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used HERMLE C800U high-speed 5-axis continuous vertical machining center; this is a medium-sized CNC machine equipped with a gantry granite structure, weighing 8,200 kg. Axis travels: X 800 mm, Y 500 mm, Z 600 mm, with a 5-axis table featuring a 280 mm diameter platter. Cjdpfjxryfzex Apajgu Year of manufacture: 2000, fitted with HEIDENHAIN TNC 430, HSK 63A spindle at 15,000 rpm (max 19 kW) cooled by a dedicated chiller, 30-position pick-up type tool changer, and remote electronic handwheel. The equipment is completed by a KNOLL chip conveyor, high-pressure through-spindle coolant, and a RENISHAW MP10 wireless 3D workpiece probe.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1820031, controller model: Siemens Sinumerik 840D, total height: 2,900 mm, total length: 6,000 mm, total width: 2,700 mm, overall weight: 8,000 kg, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, This is a very well-maintained machine, originally from a training workshop. The machine is fully functional and ready for operation. Configuration: - Siemens CNC control - Automatic tool changer - Double station / multi-sided machining - Chip conveyor - Coolant and lubrication system Cedpfx Aoy Sgazepajgu - Fully enclosed

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1820027, controller model: Siemens Sinumerik 840D, total height: 2,900 mm, total length: 6,000 mm, total width: 2,700 mm, overall weight: 8,000 kg, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, This is a very well-maintained machine that originally comes from a training workshop. The machine is fully functional and ready for use. Configuration: Siemens CNC control Automatic tool changer Double station / Multi-side machining Cedpfx Apjy Sf Sveaogu Chip conveyor Coolant lubrication system Fully enclosed

Condition: excellent (used), Year of construction: 2004, 5-Axis CNC Machining Center OKK VP 400 Year of manufacture: 2004 Control: FANUC Series 160is-MB Technical Specifications: Travel • X-axis (slide: right/left): 600 mm • Y-axis (table: forward/back): 410 mm • Z-axis (spindle: up/down): 460 mm • A-axis (table tilt): -120° to +30° • C-axis (table rotation): 360° — Distances • Distance from table surface to spindle nose: 70 – 530 mm • Distance from column front to spindle center: 620 mm — Table Codpfjy Akt Tsx Apaegu • Working surface: Ø 350 mm • Max. workpiece weight on table: 200 kg • Height from floor to table surface: 1080 mm — Spindle • Speed range: 100 – 12,000 rpm • Number of speed ranges: stepless • Spindle taper: 7/24 taper, size No. 40 • Spindle bearing inner diameter: Ø 65 mm — Feed • Rapid traverse: • X- and Y-axis: 48 m/min • Z-axis: 36 m/min • A-axis: 22.2 rpm • C-axis: 33.3 rpm • Cutting feed: • X-, Y- and Z-axis: 1 – 36,000 mm/min • A-axis: 22.2 rpm • C-axis: 33.3 rpm — ATC (Automatic Tool Changer) • Tool holder: JIS B 6339 BT40 • Pull stud: MAS403 P40T-1 • Tool magazine: 20 tools • Max. tool diameter: • Ø 110 mm (Ø 82 mm if adjacent positions are filled) • Max. tool length (from reference): 300 mm • Max. tool weight: 7 kg • Tool selection: Random Memory system • Tool change time (tool-to-tool): 1.2 s • Tool change time (cut-to-cut): 3.8 s

Condition: good (used), Year of construction: 2015, Table size 320mm, Traverses X Y Z 400 x 560 x 400mm, A axis +120/-30 degrees, Cgjdpfx Aoyt Hd Ijpaju C axis 360 degrees, Spindle speed 12,000 rpm, spindle taper BT40 24 station ATC, Siemens 828 control, swarf conveyor

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Cjdpfx Apepkyn Rsaogu Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC

Year of construction: 2004, condition: good (used), functionality: fully functional, including robot arm FANUC Robot ARC Mate 120iB TECHNICAL DETAILS X-axis: 700 mm Y-axis: 400 mm Z-axis: 360 mm speed: 10.000 rpm Csdpfol Eykgox Apaegu Control: Fanuc 16i MB Table diameter: 1400 mm feed X-axis: 10000 mm/min. feed Y-axis: 10000 mm/min. feed Z-axis: 10000 mm/min. rapid traverse: 70 m/min tool holder: Big Plus ISO/Bt/Mk Spindle power: 21 kW Torque (Twin / Single): 120 / 155 Nm number of tools: 2 x 30 tool diameter: 140 mm tool length: 280 mm milling capacity: max. 350 ccm Drill diameter: max. 40 mm Thread diameter: max. M27 MACHINE DETAILS length: 6000 mm width: 6000 mm height: 2800 mm weight: 12000 kg Total connected load: 55 kVA Total power consumption: 44 kW Voltage: 400 V Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Cjdpsxwyuaefx Apaegu Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 30Hp HAAS Control, 24 Station ATC, Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, Csdpfx Apoxpw Rvsaogu BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: used, Year of construction: 2004, Clamping area 630 x 500 mm X axis - 630 mm Y axis - 765 mm Z axis - 510 mm A axis - 0,001 deg. (+30/-120 deg.) C axis - 0,001 deg. (360 deg.) Spindle speeds 35-12000 rpm Cgjdpfsxdfiiex Apasu Spindle taper ISO 40 Control: Mazatrol 640 M 5X Equipped with: Coolant through spindle (20 bar)

Year of construction: 2002, condition: excellent (used), FIDIA K197 CNC Machining Center ​in very good and working condition​.​ Codpfx Apeppwnqsaegu

Condition: good (used), Year of construction: 2000, 20000 rpm, tool measurement on table will come, Codpfsr Urm Sox Apasgu Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! Cgsdpfsy Thlnex Apaju TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM 4th axis swivel range: 360 x 0.001 degrees 5th axis swivel range: 0 ± 102 x 0.001 degrees MACHINE DETAILS Control system model: Heidenhain - Mill Plus Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Laser tool measurement Visiport Handwheel Signal light Operating mode 4

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 460 mm, controller model: HEIDENHAIN ITNC 530, spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Number of axes: 5 Travel range, X-axis: 450 mm Travel range, Y-axis: 650 mm Cedpszaqhqsfx Apajgu Travel range, Z-axis: 460 mm Swivel angle (A-axis): -10 / +110 ° Tool magazine Number of positions: 60 Maximum tool diameter: 80 mm Maximum tool length: 250 mm Maximum tool weight: 6 kg Tool holder and spindle Tool holder: HSK 63 Minimum spindle speed: 2 rpm Maximum spindle speed: 28,000 rpm MACHINE DETAILS Operating time according to counter: 94,552 h Operating hours according to counter: 24,219 h Connection voltage: 400 V Spindle power: 38 / 28 kW Total power consumption: 70 kVA Dimensions & Weight Dimensions (L x W x H): 3,210 x 2,930 x 2,900 mm Machine weight: approx. 9,500 kg

Condition: repair required (used), Year of construction: 2006, operating hours: 500 h, functionality: not functional, Control unit: SIEMENS Sinumerik 840D Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm Codoy U Hw Eopfx Apaegu X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet Status Note:The machine is located in a technical vocational school and due to very infrequent use, the backup batteries have drained. These need to be replaced and the parameters must be reloaded.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X-axis: 650 mm Y-axis: 325 mm Z-axis: 350 mm B-axis: 130 degrees C-axis: 360 degrees Spindle speed: 30,000 rpm Spindle interface: HSK 50 Tool changer: 60 positions Control system: Makino Professional 5 Includes hybrid length measuring system Includes measuring probe Includes approximately 60 HSK 50 tool holders (MST + Rego Fix) Spindle has been replaced Codpjzapp Hjfx Apaogu Ball screws for X and Y axes replaced in 2024 Machine currently has approximately 32,000 spindle hours and is still in active production Available from approximately week 46/2026 An inspection with the machine powered on can be arranged at any time.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left Cgodpfx Asy Ih Rgjpaju - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, controller model: Sinmerik One, workpiece height (max.): 500 mm, workpiece diameter (max.): 675 mm, workpiece weight (max.): 500 kg, total height: 3,610 mm, total length: 3,970 mm, total width: 3,523 mm, table load: 500 kg, rotary table diameter: 600 mm, rotational speed (max.): 14,000 rpm, overall weight: 11,800 kg, spindle speed (max.): 14,000 rpm, coolant supply: 15 bar, distance table to spindle center: 175 mm, distance table center to spindle nose: 400 mm, spindle motor power: 37,000 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, HWACHEON D2-5AX Anniversary Model – The intelligent entry point into 5-axis machining The new HWACHEON D2-5AX was specifically developed to enable companies to make an economical and, at the same time, high-performance entry into modern 5-axis machining. As the official anniversary model from HWACHEON, it combines the highest manufacturing quality, modern control technology, and maximum flexibility for a wide range of applications. Whether it's single-part production, toolmaking, prototype construction, or automated series production – the D2-5AX impresses with its high precision, reliable processes, and a compact design with a generous work area. With travel ranges of 650 x 500 x 500 mm and a powerful rotary table with a 600 mm diameter, complex workpieces can be manufactured in a single setup. This reduces setup times, increases accuracy, and sustainably enhances productivity. The standard equipment includes an automatic BLUM tool measurement system ZX Speed and a BLUM workpiece measurement system. This minimizes setup times and ensures a high level of process reliability. Technical highlights • Travel ranges X/Y/Z: 650 / 500 / 500 mm • Rotary table Ø 600 mm • Powerful 37 kW main spindle drive • 30-tool magazine Codpfx Aezaql Nspajgu • Automatic tool measurement system BLUM ZX Speed • Automatic workpiece measurement system BLUM • Compact and stable machine construction • High dynamics and precision • Suitable for single parts, small series, and series production • Optimized for modern manufacturing requirements Control options The HWACHEON D2-5AX is available with: • Siemens Sinumerik ONE for maximum connectivity and digitalization • Fanuc 31i-B5+ for the highest reliability and ease of operation in 5-axis operation • Optionally also available as an economical Fanuc 4+1-axis version Your advantages ✔ Economical entry into 5-axis machining ✔ Reduced setup times through complete machining in a single setup ✔ High manufacturing quality and process reliability ✔ Future-proof control technology ✔ Ideal for training centers, toolmaking, contract manufacturers, and production companies ✔ New machine with state-of-the-art HWACHEON technology The HWACHEON D2-5AX offers an exceptional combination of precision, performance, and economy, making it the ideal solution for companies looking to take their manufacturing to the next level. Further information, technical data, and individual equipment options are available upon request. Contact: Benjamin Hoffmann – ACROLOC Werkzeugmaschinen GmbH.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min Cgsdpfxey H Ncbo Apaou - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! German service, spare parts warehouse, etc.

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, machine/vehicle number: S10-1622486FKDAH, spindle speed (max.): 6,000 rpm, This Hurco VM10i vertical 3-axis machining center, manufactured in 2016, will be auctioned off, including accessories, in our online auction "Site Liquidation - ARRI - Arnold & Richter Cine Technik GmbH & Co. Betriebs KG - 2 Locations!". Cgedpfxoy Urkwe Apaeu Year of manufacture: 2016 Model: VM10i Manufacturer: Hurco You can also find more lighting, camera, and CNC equipment in this auction on our RESTLOS auction platform!

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm Cgedpfxoytcf Uj Apaju z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: good (used), Year of construction: 2002, 5-axis CNC machining centre Manufacturer: AXA Machine model: VPC 50 U Control system: Siemens Cjdoyz R Hdepfx Apajgu Year of manufacture: 2002 Number of controlled axes: 5 Portal construction TECHNICAL DATA Travels - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle – swivelling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size fixed table L x W: (mm) 1,100 x 1,100 - Table diameter built-in rotary table: (mm) 1,100 x 1,100 Modifications and errors in the technical data and information excepted.