Used Advertising Material for sale (18,464)

Condition: new, Available on request! Europe-wide delivery! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Standard roll-off container 6.5 x 2.38 x 2.4 = 37 cbm Including folding net system! “semi-automatic” operation The net can be fully opened and can also remain open while driving! Other sizes available on request. Container interior length from 4 to 7.0 m possible. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Bottom: 5 mm Walls: 3 mm Cross member: INP 180 Transition from bottom to wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm -End profile made of round tube -Door latch Model Holland + -Lateral central latch -All-round tarpaulin and net hooks -Steps welded onto the front Ijdozhpizepfx Agyobc -Primed once inside, double-coated outside -Double-coated outside in a single desired RAL color Optionally available on request: -Side advertising panels -Steel quality according to specification s235, s355, hardox -DIN 30722-2 -> 22,000 total weight -Spar spacing 50 cm -Cross spars -Mounting bracket Ø 60 mm -Roller cover -Steel cover with winch / hydraulics -Net system for covering / load securing -Ladder on the rear door -Additional spars / belly band -French flap -Swing flap -Grain slide What sets us apart from others? -Robot-welded component groups -All weld seams continuous on the spars -All containers are bead-blasted -Double-primed -Double-coated -All containers have type plates and valid UVV testing.

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Iedpfezfy Ivox Agyebc Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, container length: 6,500 ft, color: other, overall weight: 15,000 kg, We offer this custom-built half-pipe roll-off container with a hydraulic rear door in a spar-free design. 6.5 x 2.3 x 1.10 = 16.5 cbm Floor / wall made of 5/4mm Hardox ❌1 unit immediately available, color can be chosen❌ Ideal for demolition, civil engineering, or agricultural use! ⚠️ Unfortunately, many dealers advertise using the Hardox brand name but do not use genuine Hardox! We exclusively use “original” HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to verify the “authenticity” of our products! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Color: as desired Delivery throughout Europe Dimensions: Approx. 16.5 cbm 6500 x 2300 x 1100 mm Isdpfszgdctjx Agyobc Possible lengths: 4.30 - 7m Possible heights: 900 1000 1100 1250 1500 Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Floor: 5mm Hardox ® Optionally, in one piece Walls: 4mm Hardox ® Crossbar: INP 180 End profile: Rectangular tube made of S700 Weight approx. 2700kg Also available in S235 "normal steel" with a floor thickness of up to 8mm! --hydraulic rear door, flush-mounted / hydraulic connections on the left -2 telescopic cylinders, optimal working pressure 160- max 200 bar -Oil flow 6-10 liters / minute -raised front cab protection -rounded transition between floor and wall -floor spar spacing 750 mm -spar profile U 80 x 50 mm -all-round tarpaulin and net hooks -primed once on the inside, double-coated on the outside -double-coated, single-color on the outside in the desired RAL color Optionally available: -roll tarp -mechanical / electric Marcolin covering -hydraulic connections on the front wall -bolted fenders -crossbar UNP 220 -lifting bracket Ø 60mm -mesh grille in the front wall -grain / cereal slide

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m Iedpfew S Ewqjx Agyebc • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Year of construction: 2006, condition: used, Year of manufacture: 2006 Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 210 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2100mm x 2400mm x 2100mm (l x w x h) Iodjwh I Edspfx Agyebc - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC - USV unit - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor - edge material height adjustment manually - PK25 snipping saws with 3 functions - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit Ijdpfjz E S E Rjx Agyjbc - remote control for setup mode - the machine is for sell together with Homag TFU material handling system - liftable air cushion table for TFU at the infeed area - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change The machine is in good condition, regularly maintained and it is still in production. Available immediately. If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770

Condition: used, Unwinding reel for coil material DREHER - DIMECO, Type 2370 BF Model 653, Year of manufacture 1979 Coil weight, max. 2000 kg Coil width, max. 320 mm Coil width with guide arms, max. 320 mm Coil width without guide arms, max. 480 mm Coil inner diameter 340-540 mm Reel shaft, support shaft, Ø 90 mm - Central spreading adjustment of the reel crown via hand crank (square shaft 24 mm) - Mechanical brake on the reel shaft with manual brake force adjustment via hand crank - 6 pcs. coil guide arms 500 mm, with toggle clamp - Conversion to motor drive possible, motor mount available, sprocket for roller chain on the reel shaft available Footprint: Width: 170 cm x Depth: 138 cm x Height: 160 cm Space required for transport: Width: 78 cm x Depth: 138 cm x Height: 120 cm Ibsdpez R D Snsfx Agyoc Weight 430 kg Good condition

Condition: used, functionality: fully functional, machine/vehicle number: 155-10000, Year of construction: 2014, operating hours: 17,700 h, total length: 1,281 mm, total height: 1,962 mm, total width: 895 mm, type of input current: three-phase, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, STRATASYS FORTUS 450mc INDUSTRIAL 3D PRINTER Located in ALBACETE, SPAIN US-built · Documented ULTEM licences · Material included From a professional service bureau that has now closed. Tested and fully functional: powers up, initialises and reaches Idle with no faults. === VERIFIED JOB HISTORY === We hold the machine's complete job history export, which records the material used on every job. 2,807 jobs recorded between December 2015 and October 2024. 2,478 completed successfully (88.3%). ULTEM 9085 — 662 jobs, the most-used material here; last run October 2024 ASA, 5 colours — approx. 1,315 jobs Nylon 12 — 205 jobs ABS-M30 and ABS-M30i — 204 jobs Polycarbonate (PC) — 164 jobs ULTEM 1010 — 155 jobs, 27 on the CG grade ABS-ESD7 — 98 jobs ST-130 — 4 jobs A machine will not print a material without its licence activated, so the history is direct evidence of licence status. We send the full file to any buyer who asks. === MACHINE DATA === Model: Stratasys Fortus 450mc, 3D Production System P/N: 155-10000 Manufacturer: Stratasys, Eden Prairie, Minnesota, USA Build date: December 2014 Technology: FDM, dual extruder, heated build chamber Build envelope: 406 × 355 × 406 mm Supply: 120/208 V, 18.0 A, 3W+N+PE, 50/60 Hz Approvals: TÜV SÜD NRTL (US/C), CE, FCC Part 15 Tips fitted: T16 model + T16 support Accumulated hours: approx. 17,700 h Weight: 601 kg · Dimensions: 1,281 × 895 × 1,962 mm Heavy use between 2016 and 2022, light use since. === US-BUILT MACHINE — 208 V === The machine sits in Albacete, but it is not a European machine. The data plate reads Stratasys, Eden Prairie, Minnesota (photograph in this listing): it is US specification, 208 V. In Spain it has run through a step-down transformer, which is supplied with it. For a US buyer this counts twice: it plugs straight in with no electrical Ijdpfx Ajy U H Hmogyjbc conversion, and US-origin goods returning to the United States can enter under HTS 9801.00.10, with no time limit on US-origin products. === MATERIAL INCLUDED — approx. €7,270 === ULTEM 9085 and ULTEM 1010 with their supports, ST-130, PC-FR flame retardant, ABS-ESD7, ABS-M30 and M30i, ASA in five colours, PC-ISO and soluble supports SR-30, SR-100 and SR-110. Itemised inventory, canister by canister with remaining volume measured, in the attached PDF. Part of the stock is Stratasys original and part is validated third-party material (iSQUARED, and Kimya PC-FR under the Stratasys Validated Materials programme). === APPLICATIONS === Aerospace, defence, automotive, medical, industrial tooling and functional prototyping. ULTEM 9085 meets FST (flame, smoke, toxicity) requirements, which suits this machine to aircraft interior parts and certifiable tooling. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: under power, by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE1-STRATASYS Full data sheet in the attached documents. Every figure comes from the machine itself and can be verified on inspection.

Condition: used, functionality: fully functional, Year of construction: 2000, color: red, Material / tool or workshop container with 3 aluminum roller shutters on each side, and a tailgate at the rear. Various drawers, pull-out tables, and ramps. Iodpezv Dy Defx Agysbc In good, well-maintained condition. Loading possible.

Condition: excellent (used), fuel type: diesel, color: blue, = Additional Options and Accessories = - Central lubrication system = Further Information = Model year: 2019 Intended application: Construction Drive: Wheeled Number of cylinders: 6 Unladen weight: 37,000 kg Body manufacturer: FUCHS MHL 350 CE certification: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Model: 2019 CE certificate Engine: Deutz 6.1 L6 Tier 4 final EPA 160 kW Boom reach: 16 m, Boom 8.5 m, Stick 7.2 m Hose rupture protection on boom Cab: Hydraulic cab elevation Fuchs Fox Cab Air conditioning Superstructure: Standard Fuchs paint Central lubrication system Undercarriage: Mobile, 4 outriggers 8x new solid rubber tyres 12.00-20 Lighting: various lights on boom, grab and cab General Information Type: Bridge crane Model year: 2019 Color: Blue Technical Data Number of cylinders: 6 Fuel type: Diesel Ibsdpfx Ageyhzpfjyec Gross weight: 37,000 kg Emission class: Stage IV FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 5,000 rpm, controller model: INDEX C200-4, TECHNICAL DETAILS Main Spindle Spindle bore with collet clamping: 65 mm Spindle diameter in the front bearing: 100 mm Speed: max. 5,000 rpm Spindle nose according to ISO 702/1: Size 5 Torque at 100%: max. 62/95 Nm Power at 100%: max. 13/20 kW Turret 1 Number of tools: 8 Tool system according to DIN 69 880: 25 mm Indexing time for 1 station: 0.2 s Cross Slide 1 XZ Ibedpfxjz Im Urs Agyoc Slide travel X-axis: 90 mm Slide travel Z-axis: 280 mm Feed force X-axis: 5,500 N Feed force Z-axis: 5,500 N Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Resolution X-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Turret 2 Number of tools: 6 Indexing time for 1 station: 0.25 s Cross Slide 2 XZ Slide travel X-axis: 81 mm Slide travel Z-axis: 80 mm Feed force X-axis: 8,300 N Feed force Z-axis: 5,500 N Rapid traverse X-axis: 16 m/min Rapid traverse Z-axis: 24 m/min Resolution X-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Driven Tools Speed: max. 6,000 rpm Torque: max. 8 Nm Tool holder bore: 25.4 mm MACHINE DETAILS Control system: INDEX C200-4 Correction accuracy: 0.001 mm Input accuracy: 0.001 mm Output accuracy: 0.001 mm Coolant system Pump capacity: 60 l/min at 5.5 bar Pump capacity: 20 l/min at 20 bar Filling volume: approx. 210 l Hydraulics Delivery rate: 19 l/min System pressure: 90 bar Filling volume: 50 l Dimensions & Weight Footprint: 3,708 (2,495) × 1,240 mm Height: 1,750 mm Floor space requirement without material handling: 3,708 (2,495) × 1,890 mm Weight: approx. 2,500 kg Three-phase connection: 400 V, 50/60 Hz Connected power: 20–45 kVA Protection of the mains supply line: 35–80 A EQUIPMENT

Condition: used, Zwick / Roell Material Testing Machine / Universal Testing Machine Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 20 kN material testing machine for tensile and compression testing with testControl II & testXpert V3.5 For sale is a used material testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials in the laboratory, quality assurance, research and development. Technical data: Manufacturer: Zwick / Roell Model series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Testing force: 20 kN Testing direction: Tensile & Compression Testing space height: 1000 mm Crosshead speed: 0.0005–1000 mm/min Power connection: 230 V / 50–60 Hz Power consumption: 8 A Electronics: testControl II Iodpfxozra Rqe Agyebc Software: Zwick / Roell testXpert V3.5 Equipment: Servo-electric material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Test fixture Various connection and cable sets Accessories as shown in the pictures Dimensions and weight: Machine dimensions (approx.): 1244 × 690 × 1324 mm (W × D × H) Weight: approx. 212 kg Application areas: Tensile testing Compression testing Material testing Quality assurance Research & Development Testing laboratory Education and training Scope of supply: 1 × Zwick / Roell Z020 Allround-Line material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Connection and cable sets Further accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Functional scope as shown in the pictures Nameplates are present The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2008, operating hours: 10,795 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 330140 / 0201, We are offering this ready-to-use Terex Fuchs MHL434 material handler, manufactured in 2008, for sale. Ijdpfxsz I Dq Ro Agyebc Condition: used, Operational status: fully functional, Power: 103 kW (140.04 hp), Total weight: 22,800 kg, Fuel type: diesel, Color: blue, Equipment: cab. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,508 h, Year of construction: 2018, machine/vehicle number: S0721Q0022, laser power: 500 W, overall weight: 4,300 kg, construction height: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Build volume: Ø 300 × H 400 mm Build rate: 5–60 cm³/h Layer thickness: 20–150 µm Laser power: 500 W Beam diameter: 100–500 µm O₂ concentration: 100 ppm Exposure speed in the powder bed: 3 m/s Preheating of the substrate plate: 200 °C MACHINE DETAILS Voltage: 400 V Current: 32 A Frequency: 50/60 Hz Dimensions & Weight Dimensions incl. filter system: 3,385 × 1,435 × 2,225 mm Weight incl. filter system: 4,300 kg Iedpfx Aez Irhksgysbc Laser operating hours “Laser Beam on”: 17,508 h (as of 11.04.2023) EQUIPMENT Filter system Zirox sensor Single laser Powder Bed Monitoring Condition Monitoring Performance Monitoring Protective gas operation with nitrogen or argon 4 dosing containers 1 build cylinder 1 overflow container Various spare parts, including protective glass Manuals All axes professionally secured for transport The following materials can be processed: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum-, nickel-based, cobalt-chromium, copper, titanium and precious metal alloys. Last processed material: AlSi10Mg

Condition: good (used), fuel type: electric, Year of construction: 2013, operating hours: 6,600 h, machine/vehicle number: 83851483, Equipment: crane, Fully functional material handler for ports, in very good condition. Onsite inspection is welcome. Another 835 R is also available (model year 2011 with 10600 hours). Ibjdpfxsvwbdye Agyec

Condition: used, Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Ibodpjzg Tpvjfx Agysc Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Increased recirculating air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (TS) adjustable above the nominal temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (TS): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Ijdpfezg Tppox Agyebc Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Increased recirculating air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (TS) adjustable above the nominal temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (TS): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Iodpszimgtefx Agyebc Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Machine in good technical and visual condition; model year: 2012; immediately available; additional attachments are available upon request. Ibsdpfxjzw Hnaj Agyec

Condition: used, Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Increased recirculating air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Ibodpfxezd Rrcj Agyjc Cut-out temperature: Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (TS) adjustable above the nominal temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (TS): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: CO1040, The following components have been replaced: Engines Gearboxes Chains TECHNICAL DETAILS Iodoz I Tkmepfx Agyebc Design: Double-shaft paddle mixer Material: Stainless steel Batch capacity: 1,200 kg EQUIPMENT Stainless steel storage container at the bottom

Condition: used, Zwick / Roell Type: LTM10 Max. testing frequency: 100 Hz, depending on the amplitude Dynamic testing force in tension/compression: 10 kN Static testing force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeat accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Testing space height without load cell: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance specifications, partially performed by Zwick/Roell Ibjdpfezh D R Hjx Agyoc Accessories: screw chucks, software (TestXpert research) Connection: 400V 50/60 Hz 32A 3-phase/PE Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 2 axles, Year of construction: 2013, operating hours: 12,451 h, LIEBHERR LH30M. YEAR: 2013. WEIGHT: 32,000 KG. LIEBHERR ENGINE, 140 KW. HOURS: 12,451. HYDRAULIC CAB. FOUR OUTRIGGERS. SOLID TIRES. 6.80 m INDUSTRIAL BOOM. 5 m INDUSTRIAL JIB. EQUIPPED WITH A NEW, ORIGINAL SLEWING RING. CE CERTIFIED. EXCELLENT CONDITION. Ijdpfszzz Ngox Agyjbc

Condition: used, mileage: 2,60,000 km, power: 338 kW (459.55 HP), first registration: 05/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: mechanical, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 18.460 – TIPPER HYDRAULICS AND ADR – ALCOA ALUMINUM RIMS – FULL CAB – ACC – HAZARDOUS GOODS – VEHICLE HISTORY * Luxembourg documentation * VIDEO AVAILABLE UPON REQUEST * OPERATING HOURS: 5,753 h VEHICLE EQUIPMENT * MANUAL TRANSMISSION * CRUISE CONTROL * DISTANCE CONTROL * LANE KEEPING ASSISTANT * ACTIVE BRAKE SYSTEM * BLIND SPOT ASSISTANT * ALCOA ALUMINUM RIMS * FULL CAB * ON-BOARD COMPUTER/NAVIGATION * AIR CONDITIONING * STANDING HEATER * AUXILIARY DRIVE/TIPPER HYDRAULICS * 1 X SLEEPER CAB Ibedpfxjzw Scco Agyjc * HEATED SEATS * FRONT AXLE: LEAF SPRING * REAR AXLE: AIR SUSPENSION * 1 X TANK * TIRE SIZE 315/70R22.5 * GOOD TIRES * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ * EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER). 5 DAYS, 15 DAYS, 30 DAYS PLATES, AND 15 DAYS AUSTRIA PLATES. EURO 1 TECHNICAL DATA SHEET. VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Changes, errors and prior sale reserved! You can find more vehicles on our website. Sales are made exclusively according to our general terms and conditions – see homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, mileage: 1,02,009 km, power: 125 kW (169.95 HP), first registration: 08/2023, fuel type: diesel, empty load weight: 2,409 kg, maximum load weight: 1,091 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, energy efficiency: E, CO₂ emissions: 263 g/km, fuel consumption (combined): 10 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,160 mm, total width: 2,350 mm, total height: 2,290 mm, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, central locking, power assisted steering, second-hand vehicle warranty, soot filter, trailer coupling, QA8 Trailer coupling for increased towing capacity 2.8 t/3.0 t, E07 Hill-start assist, LA2 Headlamp assistant, JG0 Gear shift indicator, JA8 Crosswind assist, MJ8 ECO start-stop function, XY4 Model year 4, J65 Outside temperature display, F68 Heated and electrically adjustable exterior mirrors, IR4 Wheelbase 3665 mm, SA5 Driver airbag, SA6 Passenger airbag, E1D Digital radio (DAB), S23 Passenger seat, single occupant, AR3 Axle ratio i = 4.182, S22 Armrest for driver's seat, S02 Driver's seat, IF4 Chassis with double cab, PZ9 Ladder rack behind the cab, F35 Rear window, IL5 Left-hand drive, R87 Spare wheel, RS3 Steel wheels 6.5 J x 16, LE1 Adaptive brake light, EY5 Mercedes-Benz emergency call system, IT4 3.5-ton vehicle, GD8 6-speed manual transmission ECO Gear, Z0Z Engine compartment damping, KP7 Exhaust gas purification SCR Generation 4, FF5 Storage compartment above the windshield, FJ4 Storage compartment under the cockpit, 804 AEJ X3/1, E43 Trailer socket 13-pin, J52 Engine oil level indicator on cold start, 9147 arctic white, IC1 Model series C907 / C910 Sprinter, IE0 Model series C907 VS30 RWD, F3F Passenger-optimized shift console, EW6 Digital extra: Remote Services Plus, MT6 Emission class Euro 6d N1, M72 Vehicle capable of HVO fuel, Z4W Production location Ludwigsfelde, M60 Generator 14 V / 250 A, XM1 Noise reduction measures, J55 Seat belt warning system for passenger, J58 Seat belt warning system for driver's seat, J1A Seat belt warning system for rear seats, HH9 Semi-automatic controlled climate control system TEMPMATIC, K13 Main tank 71 liters, IH6 Head unit ECE/RoW, Y43 Hydraulic - jack, F61 Interior mirror, FF0 Coat hooks in the passenger compartment, HI1 Climate zone 1 (cold/comfort), JH3 Communication module (LTE) for digital services, IK0 Complete vehicle, ES5 Charging package instrument panel, CL1 Steering wheel adjustable in inclination and height, Z2E Country version EU - EFTA - UK, Q11 Longitudinal member reinforcement, E1O MB audio system, XO9 Mercedes-Benz MobiloVan with DSB and GgD, XG7 Without payload restriction 3,500 kg, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, EY6 Breakdown management, Z3R Premium tire protection (3 years), P02 Flatbed with aluminum sideboards, R65 Spare wheel holder under the end of the frame, Z75 Additional bodywork measures, Z74 Additional bodywork measures 2, RZ2 Wheel manufacturer Magnetto Wheels, XU1 Signage / printed materials German, P48 Rear mud flaps Note: Despite careful review of all our price quotations, errors still occur. Some of these are caused by transmission errors in the systems of the various platform providers. But errors on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. A price quotation also cannot be declared as a component of the contract. If you attach particular importance to a specific feature of our advertisement, please let us know when concluding the contract. Thank you for your understanding! Ibjdez Eb Etopfx Agysc