Used Advertising Material for sale (18,470)

Condition: used, mileage: 500 km, power: 375 kW (509.86 HP), first registration: 12/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #398 Mercedes-Benz Arocs 3551 8x4 with Combined High Pressure Jetting and Suction Pressure Tank Body ADR Type K 1.0-18.0 / 28 PE This Mercedes-Benz Arocs 3251 8x4 with KROLL ADR combined jetting and suction pressure tank body is a NEW vehicle, built for the highest performance requirements. With VacuStar WR 3100, Uraca KD 718, large hose storage cassette, DN125 telescopic boom, and complete ADR L4BH equipment, it is immediately ready for demanding sewer, industrial, and hazardous goods applications. Body • Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH • Tank material: S355J2+N (St 52.3) • ADR suction/pressure tank Type K 1.0-18.0 / 28 PE • Ejector piston with 3 locking positions • Suction from open waters possible (“comfort version”) via boom cassette with integrated filter • Tanker equipment ADR – Type class AT/FL L4BH • Discharge via pneumatically actuated piston • Sludge water outlet DN80 for backflushing via the boom into the channel Vacuum System • CVS VacuStar WR 3100 – approx. 3,100 m³/h at 400 mbar • Approx. 20 m HD hose DN125 • Hose storage cassette with simultaneous telescopic boom DN125 • Parallel routing of suction and HD hoses over the boom • Reach on hit side: 5,200 mm • Hydraulic suction hose reel on the right with 30 m DN75, fully passable High-Pressure System • Uraca KD 718 – approx. 315 l/min at 170 bar • Large HD hose reel for 240 m DN25, 180° swiveling Gksdpfjxc Sz Nox Akajb • Equipped with 160 m DN25 • Small HD hose reel for 80 m DN13, hydraulic • Equipped with 80 m DN13 Special Features • Hose storage cassette with telescopic boom DN125 • Continuously adjustable suction hose height (hydraulic, roller guide carriage) • Hydraulic, telescopic, 180° swiveling boom arm • Electric cable winch on the boom • ADR L4BH, including EX/II, EX/III and AT • Spray gun • LED beacons • LED ambient lighting • CAN-BUS remote control for work functions • Radio remote control with 14 functions • Hot water hand washing unit • Large locker rear left (e.g. for push camera) • Reversing camera • Sound insulation for pump compartment • Large equipment box • Toolbox • Holder for traffic cones • Vice • Ladder • Large advertising boards right & left Special Equipment • Axle load measuring system • Digital radio DAB/DAB+ • ADR equipment package • Right-hand outer mirror with maneuvering position • 220 Ah battery • Interactive multimedia cockpit • 24V / 100A electrical pre-installation cab • High beam and cornering light assistant • Movable cab entry • Front suspension: 9.0 t / 4-leaf • Remote online query function • Tinted windshield with band filter • Vehicle without trailer coupling • ADR hazardous goods version Type FL • Speed limiter • 16-speed gearbox G 280-16 • Gearbox lock (independent of transmission) • Rear axle ring gear 300 • 3-piece mudguards with splash protection • Fuel tank 290 l aluminum, left • Cool box / refrigerator • Cooling package for hot regions • Front air intake • Reinforced engine brake • Trailing axle: 9 t steered, relievable, liftable • Navigation system • PTO – smooth flange • PTO independent of transmission and dependent on clutch MB 1.65 • Programmable special module • Wheelbase variant 3,900 mm • Frame overhang 1,200 mm • Re

Condition: excellent (used), Year of construction: 2015, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2015 Singamas 20FT Foodgrade Tank Container 25,000L capacity / 1 compartment Foodgrade, bottom discharge Gkedpfxsv Aah Us Akaob UN Portable T1 5-year inspection valid until 07/2026 = More information = General Information Year of manufacture: Jan. 2015 Model year: 2015 Permitted contents: Foodstuffs Weights Tare weight: 3,300 kg Payload: 32,700 kg Gross weight: 36,000 kg Functional Cargo capacity: 25,060 l Body manufacturer: Welfit Oddy TOP: beer container (foodgrade), 25,000L, foodgrade, inspection valid till 07/2023 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: ready for operation (used), functionality: fully functional, total width: 28,500 mm, shelf height: 4,500 mm, carrying capacity per cantilever arm: 1,000 kg, distance between stands: 1,500 mm, load capacity per stand: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! The sale includes the entire shelving system. Gksdpfx Akjzzda Usasb TECHNICAL DETAILS Number of uprights: 19 Number of arms: 38 Total load capacity per upright: 2,000 kg Load capacity per arm: 1,000 kg Arm length: 1,250 mm Upright height: 4,500 mm Base length: 1,200 mm Distance between uprights: 1,500 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, laser source model: HF, laser power: 80 W, table length: 1,000 mm, table width: 600 mm, workpiece height (max.): 230 mm, resolution (max.): 1,000 dpi, No minimum price – guaranteed sale to the highest bidder! Suitable for professional engraving and cutting of various materials such as wood, acrylic, glass, plastic, and metal! TECHNICAL DETAILS Laser power: 80 W Laser source: Synrad HF-CO₂ laser source Table size/working area: 1,000 x 600 mm Maximum workpiece height: 230 mm Maximum resolution: 1,000 dpi Maximum cutting speed: 3,200 mm/s MACHINE DETAILS Power supply: 230 V Dimensions & Weight Machine dimensions (L x W x H): 1,480 x 900 x 1,120 mm Machine weight: 300 kg Gkjdpfx Ajzx Dz Hjkaob EQUIPMENT Microsonic autofocus sensor for automatic distance detection and precise focusing LED interior lighting Rotary engraving device for cylindrical workpieces External extraction system Durable Synrad CO₂ laser source

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, overall weight: 22,400 kg, total length: 24,000 mm, total width: 3,500 mm, load capacity: 40 kg, power: 40 kW (54.38 HP), Equipment: documentation/manual, ABUS bridge crane, 40 t + 16 t auxiliary winch. Year of manufacture: Crane and main winch: 1997. Auxiliary winch: 2003. The crane was installed in this facility in 2003. Span: 21,100 mm. ABUS wire rope winches. Radio remote control. Gkjdszzagqspfx Akajb Power supply: 3 x 400 V. Price excludes dismantling. Dismantling and transport can be arranged.

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 18,700 mm, number of shelf rows: 36, Equipment: documentation/manual, Medek Push-Back Pallet Racking System – 180 Pallet Positions We offer a used Medek push-back pallet racking system, type Boltless XL, manufactured in 2012, from our own operational stock. Gedpfx Akezz A Svjaskb Technical data: Total length: approx. 18.7 m Year of manufacture: 2012 36 push-back channels 5 pallets per channel Total of 180 pallet positions Manufacturer: Medek Type: Boltless XL The racking system is in good used condition and was regularly inspected during its use. It is currently still fully assembled and can be inspected by appointment at our location in 63165 Mühlheim am Main. Upon request, an updated racking inspection can be carried out before delivery. The original purchase price of the system was approximately €36,000 net. The current new price of a comparable system is approximately €51,000 net, according to current information. Dismantling, loading, and removal are to be carried out by the buyer, or can be arranged separately. We would be happy to provide further detailed photos and any available technical documentation upon request. Price: €10,000.00 net, negotiable, plus applicable VAT. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2010, overall weight: 16,000 kg, maximum load weight: 13,410 kg, empty load weight: 2,590 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, GERMAN DEALER offers: BDF demountable body, 7.45 m Galvanized Suitable for crane loading Double locking mechanisms Tie-down points Sliding tarpaulin Sliding curtain Year of manufacture: 04/2010 16,000 kg GVWR 2,590 kg unladen weight Interior dimensions: 7300x2480x2520 mm Many demountable bodies and chassis are in stock! Gksdpfx Aksz Aav Isaob ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN SUPPLYING SINCE 1983! VIEWING ONLY BY APPOINTMENT! #####

Condition: used, empty load weight: 1,900 kg, maximum load weight: 14,100 kg, overall weight: 16,000 kg, loading space length: 7,700 mm, loading space width: 2,460 mm, maximum speed: 210 km/h, GERMAN DEALER offers: BDF swap body platform 7.82m, galvanized, with lashing rings, craneable, 16,000 kg gross weight, 1,900 kg unladen, 7,700mm x 2,460mm. Multiple units available. Numerous swap bodies and drawbar trailers in stock! ##### PLEASE CALL – NO EMAILS! ##### NATIONWIDE DELIVERY AVAILABLE IN GERMANY! MEPO-Nutzfahrzeuge has been supplying since 1983! VIEWING BY APPOINTMENT ONLY! ##### Gkjdpfx Asz Adwpskajb

Condition: used, mileage: 2,72,250 km, power: 324 kW (440.52 HP), first registration: 06/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, Year of construction: 2012, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #480 MAN TGS 26.440 6x2 with KROLL High-Pressure Jetting and Suction Body with Water Recovery WRS2 Body KROLL Fahrzeugbau-Umwelttechnik GmbH * Type K 1.0-13.0/29 P * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Maximum reach on pivot side: 5,200 mm * Tank material: S355J2+N (St. 52.3) * Water recovery system * Telescopic piston with 3 locking positions * EMPTYING: via pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for returning dirty water through the boom into the sewer. * Water compartments on the sides Chassis MAN TGS * 26.440 6x2 * manual transmission * EURO 6 * Fuel capacity approx. 400 l * Driver’s cab color: Municipal Orange RAL 2011 * 2x LED beacon lights on the cab * Reversing camera * Air conditioning Vacuum system CVS WR 3100, approx. 2,465 cbm/h at 400 bar * Drive: flexible, via drive shafts, V-belts, and pneumatically operated friction clutch from the vehicle engine’s PTO. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Maximum reach on pivot side: 5,200 mm High-pressure system Uraca P 3-45, approx. 345 l/min at 205 bar * Drive: flexible, via drive shafts, V-belts, and pneumatically operated friction clutch. * Large HD hose reel for 240m 1" DN 25, swivels 180° * Equipped with approx. 200m DN25 * Small HD hose reel for 80m DN 13, hydraulically operated * Equipped with approx. 60m DN13 Special features - hose storage cassette with telescopic boom DN 125 Gsdpfxjwwf S To Akaokb * Infinitely variable height adjustment of suction hose via hydraulic roller guide carriage * Suction hose boom, hydraulic operation and telescopic, swivels 180° * KROLL water recovery WRS2 * Water spray gun * LED beacon lights * LED work area lighting * Work functions remotely operated via CAN-BUS technology * Radio remote control * Reversing camera with 7" color monitor * Soundproof enclosure in pump area * Large tool and hose storage boxes * Toolbox * Holder for traffic cones * Vice * Pulley for banana/guide device * Large advertising boards on right and left For further detailed information and/or photos, please contact us directly. You can find a wide selection of further vehicles for PURCHASE or RENTAL at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively pursuant to our general terms and conditions and under exclusion of any warranty. Special equipment: Front axle load 9.5 t, elevated exhaust pipe on right, co-driver bench seat, rear axle differential lock, ETA circuit breaker, flame-start device, heavy-duty roll stabilization, automatic climate control, trailing axle NOL-08 steered, liftable, PTO NMV221, beacon (2), external sun visor, fleet management system control module, reinforced front axle shock absorbers, preparation for engine start/stop system at end of frame.

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Burgers Double Deck Trailer | 2-Axle Steered NEW More volume. Lower costs. More sustainable transport. Up to 60% more loading space compared to standard trailers. In many cases, replaces 3 trailers with 2 double deckers, reducing CO₂ emissions by up to 40%. Technical Data (Model: 2-axle steered) Chassis and Running Gear Design: 2-axle, steered * Axle system: TRIDEC TF-V02, mechanical steering without electronics * Air suspension with low-maintenance bushings, lift range +160 mm / -105 mm * Axle spacing: 1,400 mm Gkedpfxew I Iins Akasb * Axle load: 2 × 9,000 kg = 18,000 kg * Permissible gross weight: 30,000 kg (12,000 kg kingpin load + 18,000 kg axle load) * Tyres: 4 × Goodyear 385/65 R22.5 on steel rims * Wheelbase and axle position adjustable according to loading scheme * Wheel housings with wear blocks and anti-spray mudflaps * Fully hot-dip galvanized chassis to ZINQ standard Brake and Safety Systems WABCO 2-line air brake system * Drum brakes 420 × 180 mm * ABS/EBS-E with ECAS (level control), ELEX, and RSS (electronic stability control) * Visible indicator lights for ABS/EBS and ECAS Dimensions External dimensions (L × W × H): 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: Length 13,590 mm × Width 2,500 mm × Height 1,820 mm * Lower deck internal dimensions: Length 9,940 mm × Width 2,500 mm × Height 1,820 mm * Lower deck height from ground: 320 mm Bodywork and Materials Side walls: 21 mm plywood, coated inside and out with white polyester * Front wall: 24 mm plywood, both sides polyester white * Roof: 30 mm insulated polyester panel, white, with rainwater drainage * Floors: Aluminium profiles (top and bottom), non-slip, grey coated * Stainless steel front and corner profiles, L-profiles on side flaps Access and Operation Three side flaps (battery compartment, lift/smartboard control, technical access) * Multi-deck lift Dhollandia DH-VH (2,500 kg lifting capacity, hydraulic folding tip, LED platform lighting, foldable handrails and ramps) * Lift control: external operation on the right, integrated into the fence * Spare wheel not included Electrics and Lighting LED interior lighting upper and lower deck * Complete LED exterior lighting: position, marker, reverse, and work lights * Additional LED for platform lighting * Power supply via 2 × 230 Ah batteries, charging via tractor unit * Main switch behind side flap, coupled with lift control * WABCO Smartboard: weight display, odometer, adjustable loading/unloading heights Finish and Paintwork External colour: RAL 1003 yellow (non-metallic) including wheel wells, stainless steel front and rear * Reflectors: 3M partial contour marking (white sides, red rear) * Advertising space possible (optional) Benefits 60% more loading space – replaces up to 3 standard trailers with 2 double decks * 40% lower CO₂ emissions – eco-friendly and economical * ROI often within just 1 year * Customisable (axles, cooling, dimensions) * Suitable for long-haul and distribution transport Available Configurations at Burgers: 2-axle standard – rigid or steered, 13.60 × 2.55 × 4.00 m * 3-axle standard – rigid or with steered axle * City trailer – max. 11.50 m, always steered * Special dimensions – height up to 4.25 m depending on national regulations * Body: plywood or insulated, optionally with cooling and temperature zones * Extras: tail lift, hydraulic ramp, solar modules, cameras, aerodynamic profiles, LED packages For further information, we are happy to assist you.

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Gsdpoy Nc H Esfx Akaokb

Condition: new, power: 235.36 kW (320.00 HP), fuel type: diesel, axle configuration: 4x4, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our range of new vehicles, we offer you: TLF 4000 all-wheel drive with 5,000 liters of water on an off-road MAN TGM 18.320 all-wheel drive chassis. Our "Water Buffalo" on a MAN chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 hp (235 kW) • Automated transmission • Off-road tires • Matching single tires for high off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 PA mountings in the crew compartment Gsdjzmyy Uopfx Akaekb Superstructure: • High-quality superstructure in a frame construction made of rust- and corrosion-free material • Fold-out steps for each side equipment compartment • Individually customized equipment storage made of stainless steel according to your wishes • Walkable, non-slip vehicle roof Vehicle pump/fire extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP&ROLL capable • Performance 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam mixing system • Water tank 5,000 l with integrated foam tank 500 l • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure quick-attack system with 50 m kink-resistant hose • Foam/water monitor 2,000 l/min on the vehicle roof • Self-protection system with 4 extinguishing nozzles in front of the tires Safety and lighting: • LED light bar on the vehicle roof/2 LED front warning lights • Pneumatic special signal system Martin horn • Public address system 100 W with intercom unit • Reversing camera • Comprehensive LED lighting in the crew and all equipment compartments • LED ambient lighting on the superstructure and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board on request We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 1 kW (1.36 HP), Simar FX 2004 Material Handling Device Motor power: approx. 0.9 – 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Simar FDX-2 Dye Dosing Unit Drive type: Stepper motor (high rotational speed repeatability) Power supply: 230 V / 50 Hz Speed: Continuously adjustable (depending on the control unit, typically 0.1 – 200 rpm) Gkjdpfx Aoy Hldnokasb Dye container capacity: approx. 5 liters

Condition: repair required (used), Year of construction: 2017, Hello, I have a Sennebogen 818 material handler for sale. Year: 2017 Gkjdjzx U R Espfx Akaob The excavator starts, drives, and the hydraulics work; the problem is that the display is not working (no engine speed control).

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, load capacity: 20,000 kg, DCB bridge crane, 20 tons. Year of manufacture: 2003. Span: 21,100 mm. Gjdpfxszzkguo Akaskb Verlinde wire rope hoists. Power supply: 3 x 400 V. Price excludes dismantling. Dismantling and transport can be arranged.

Condition: excellent (used), Year of construction: 2003, total length: 7,750 mm, total width: 2,550 mm, total height: 2,670 mm, Van Hool 20FT tank container / swap body, 28,095L / single compartment bottom discharge UN PORTABLE, T11 steam heating (10 bar) insulated Gkedpfszyriuex Akajb design temperature: -40° to +220°C, Payload: 31,230 kg ADR and CSC inspection valid until 05-2028 = Further Information = General Information Year of manufacture: Jan. 2003 Model year: 2003 Weights Tare weight: 4,770 kg Payload: 31,230 kg Gross vehicle weight: 36,000 kg Functional Loading capacity: 30,850 l Body brand: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good For more information, please contact Arne Honingh.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser source manufacturer: Raycus, laser power: 6,000 W, laser wavelength: 1,070 nm, working length: 1,500 mm, working width: 3,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 2,610 mm, total width: 5,125 mm, total height: 2,128 mm, Equipment: CE marking, The WatMachinery ZMB1530 6kW is a heavy-duty fiber laser cutting machine from the ZMB series, engineered for fast, precise, and reliable sheet metal processing. This model is fitted with a Raycus 6kW fiber laser source and offers a cutting area of 3000 x 1500 mm, making it an optimal solution for workshops and industrial production lines working with steel, stainless steel, aluminum, brass, and other metals. The machine is equipped with a Raytools BS06K auto-focus cutting head, Delta / INOVANCE servo drives, Taiwan-made rack transmission, HIWIN / DTX linear guideways, a French Motovario gearbox, and the Cypcut control system. Its robust construction includes a reinforced machine frame, enclosed safety cabin, automatic lubrication system, industrial control cabinet, integrated smoke extraction, and an industrial-grade PC. Each component has been selected to ensure high positioning accuracy, stable drive transmission, and reliable long-term operation. The ZMB1530 is designed for continuous industrial duty with a 24-hour operating mode, travel speed of 80 m/min on the X and Y axes, and a maximum acceleration of 0.8G. The control system supports multiple file formats, remote operation, and real-time alarms and safety interlocks. An industrial water cooling system guarantees stable performance of the laser source and protects the machine during extended production cycles. As indicated in the material and cutting charts in the product brochure, the machine efficiently processes carbon steel, stainless steel, aluminum, and brass. The ZMB series is ideally suited for industries such as sheet metal fabrication, electrical cabinet manufacturing, automotive component production, general machinery, signage, metal product manufacturing, tooling, and many more sectors. Key Advantages: - 3000 x 1500 mm working area - Raycus 6kW fiber laser source - Raytools BS06K auto-focus cutting head - Cypcut control system - Delta / INOVANCE servo motors and drives - HIWIN / DTX linear guideways - Taiwan YYC rack transmission - French Motovario gearbox - Industrial water chiller - Fully enclosed protective cabin - Automatic lubrication system - Industrial PC with integrated vision system - Designed for 24/7 industrial operation Technical Specifications: Model: ZMB1530 / ZM-Series Laser Source: Raycus Fiber Laser Laser Power: 6 kW Gkodpfeyr D Nxsx Akaeb Working Area: 3000 x 1500 mm Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 100 mm Traverse Speed (X/Y): 80 m/min Positioning Accuracy: ±0.05 mm/m Repeatability: 0.05 mm Maximum Acceleration: 0.8G Power Supply: 380V / 50Hz Operating Mode: 24/7 Machine Weight: 3150 kg Machine Dimensions: 5125 x 2610 x 2128 mm Main Components: * Raycus laser source * Raytools cutting head * WatMachinery machine bed and gantry * Taiwan YYC rack * France Motovario gearbox * Delta / INOVANCE servo drives (X, Y, Z axes) * HIWIN / DTX linear guideways * Cypcut control system * HanLi industrial water chiller * CHNT / Schneider electrical components * CKD / SMC pneumatic components * Integrated smoke extraction system * Automatic lubrication system * HP industrial PC * Enclosed safety cabin Application Areas Suitable for: * Sheet metal fabrication * Electrical cabinet production * Advertising and signage * Mechanical parts manufacturing * Kitchen equipment production * Automotive industry * General machinery industry * Metal product manufacturing * Tooling and measurement component production Pro

Condition: excellent (used), fuel type: diesel, color: blue, = Additional Options and Accessories = - Central lubrication system = Further Information = Model year: 2019 Intended application: Construction Drive: Wheeled Number of cylinders: 6 Unladen weight: 37,000 kg Body manufacturer: FUCHS MHL 350 CE certification: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Model: 2019 CE certificate Engine: Deutz 6.1 L6 Tier 4 final EPA 160 kW Boom reach: 16 m, Boom 8.5 m, Stick 7.2 m Hose rupture protection on boom Cab: Hydraulic cab elevation Fuchs Fox Cab Air conditioning Superstructure: Standard Fuchs paint Gksdjyhzpfjpfx Akasb Central lubrication system Undercarriage: Mobile, 4 outriggers 8x new solid rubber tyres 12.00-20 Lighting: various lights on boom, grab and cab General Information Type: Bridge crane Model year: 2019 Color: Blue Technical Data Number of cylinders: 6 Fuel type: Diesel Gross weight: 37,000 kg Emission class: Stage IV FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 32,000 kg, Year of construction: 2016, operating hours: 20,300 h, LIEBHERR LH30M. YEAR: 2016. WEIGHT: 32,000 KGS. LIEBHERR ENGINE, 140 KW. HOURS: 20,300. HYDRAULIC CAB. FOUR OUTRIGGERS. SOLID TIRES. 6.80 m INDUSTRIAL BOOM. 6 m INDUSTRIAL JIB. WITH GENERATOR. CE CERTIFIED. IN GOOD CONDITION. Gkodpfx Aozzz Agekaeb

Condition: new, fuel type: diesel, fuel: diesel, Equipment: air conditioning, airbag, central locking, differential lock, parking heater, trailer coupling, From our product range, we offer you: Equipment vehicle logistics GW-L2, all-wheel drive, on a rugged MAN TGM 13.290 chassis. A vehicle for many tasks. Equally suitable for severe weather operations as it is for establishing a water supply over long distances, even in difficult terrain during forest and vegetation fires. As a modular replacement for rescue and equipment vehicles or with water tanks for transporting firefighting water. Or... ...just right for your needs! Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 hp (213 kW) with automatic transmission • Same-track single tires for high off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire engine red) • Cab with auxiliary heater Superstructure: • High-quality superstructure made of rust and corrosion-resistant material • Two spacious side equipment compartments • Fold-out steps for each side equipment compartment • Individually customized equipment storage systems made of stainless steel to your specifications Tail lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Platform dimensions 1810 mm x 2520 mm (height/length x width) • 2-button foot control • 2-fold roll-off safety • LED platform lights Safety and Lighting • LED mini light bar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rearview camera • Comprehensive LED lighting in the crew cabin and all equipment compartments • LED ambient lighting on the superstructure and auxiliary headlights • Pneumatic LED light mast with remote control We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. Gkedpfx Aozmy Apokajb All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer but is for informational purposes only. Subject to prior sale!

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Godpfxoz Ag Abo Akajkb Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 50 kg, power: 1.1 kW (1.50 HP), tank capacity: 10 l, Material Conveying Unit Simar FX 2504 Motor Power: 1.1 kW (brushed motor) Power Supply: 230 V / 50 Hz Container Capacity: approx. 5 litres Conveying Performance: approx. 150 – 200 kg/h (depending on material) Maximum Conveying Distance: approx. 15 – 20 meters Pipe/Hose Diameter: 38 mm (DN 38) Housing Material: Polished stainless steel Gkjdpfoy Hlv Rjx Akaob Colorant Doser Simar FDX-2 Drive Type: Stepper motor (high RPM repeatability) Power Supply: 230 V / 50 Hz Speed: Infinitely adjustable (depending on control unit, typically 0.1 – 200 rpm) Color container capacity: approx. 5 – 10 litres

Condition: used, mileage: 20,000 km, power: 335 kW (455.47 HP), first registration: 07/2025, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #511 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure cleaning and suction-pressure tank superstructure ADR Type K 14.0 / 28 PE Body by KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material: S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Telescopic piston with 3 locking positions * (3,300l water / 10,600l sludge, 5,500l water / 8,200l sludge, 7,700l water / 6,000l sludge) * Suction from open waters possible—"comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * EMPTYING: via pneumatically-actuated piston * SLUDGE WATER DRAIN DN 80: for pushing the dirty water back through the boom into the sewer. Vacuum system CVS VacuStar 1600 approx. 1,550 cbm/h at 400 bar * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Parallel guidance suction and high-pressure hose via boom * Suction hose reel hydraulic right-side with 30 m DN 75 (can be fully suctioned through) High pressure system Uraca KD 718 approx. 315 l/min at 170 bar * Large HD hose reel for 240 m 1" DN 25, 180° pivotable * Equipped with 160 m DN25 * Small HD hose reel for 80 m DN 13 hydraulically operated * Equipped with 80 m DN13 Special features hose storage cassette with telescopic boom DN 125 * Infinitely adjustable height of suction hose hydraulically via roller guide carriage * Extension arm for suction hose hydraulically and telescopically extendable and 180° pivotable * ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED area lighting * Remote operation of work functions via CAN-BUS technology Gedpfsxc Szijx Akaokb * Radio remote control with 14 functions * Hand-washing unit (heated) * Large cupboard rear left, e.g. for push camera * Reversing camera with 7'' color monitor incl. day/night mode * Noise protection panel in front of pump room * Large tool compartment * Toolbox * Holder for traffic cones * Vice * Ladder * Large advertising boards on right and left Special equipment: Chassis cover, axle load measuring system, front axle load 9.0 t, airbag driver's side, 220 Ah battery, battery master switch, standard and DuoMatic brake connectors, interactive multimedia cockpit, air pressure horn, electrical pre-wiring in cab 24V / 100A, driver assist system: high beam assistant and cornering light, driver assist system: traffic sign recognition, suspension: front springs 9.0 t, 4-leaf, tinted windshield with band filter, hazardous goods version ADR type FL, generator 150 A, speed limiter, gearbox 16-speed - type: G 280-16, rear axle crown wheel 300, cab air filter for construction vehicles, 3-piece mudguards, 3-piece mudguards with splash protection, fuel tank: 330 L aluminum left side, cooling system for hot climates, trailing axle 9 t steered, loadable, liftable, navigation system, PTO - flange splined, PTO gearbox-independent and clutch-dependent MB 1.65, parameterizable special module, chassis lowering without residual air pressure regulation, chassis overhang 1350 mm, smoker's package, rain sensor, tire pressure monitoring system, acoustic reverse warning and warning flash light (external warning signal) For further detailed information and/or images, please contact us directly. You can find a wide selection of more vehicles for SALE or RENT at: Changes, prior sale and

Condition: good (used), Year of construction: 2007, total length: 6,060 mm, total width: 2,550 mm, total height: 2,670 mm, = Additional Options and Accessories = - ADR = Notes = Welfit Oddyl 20FT Tank Container 24,870 L / 1-compartment UN Portable T-11 L4BH steam-heating bottom-discharge 2.5Y + CSC test: 02-2027 = Additional Information = General Information Year of Construction: June 2007 Model Year: 2007 Weights Unladen Weight: 3,650 kg Payload: 32,350 kg GVW: 36,000 kg Functional Load compartment volume: 25,064 l Body manufacturer: Welfit Oddy TC 25,070L Number of compartments: 1 Condition Technical condition: good Visual condition: good Further Information Gkjdpfx Akey A Sktoaob Please contact Arne Honingh for further information.

Condition: good (used), Year of construction: 2001, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Welfit Oddy 20FT Tank Container Swap Body Capacity: 31,050L / 1 compartment Type: IMO-1, T7 Code: L4BN Bottom discharge Steam heating Insulated Payload: 32,020kg Design temperature: +130°C 5Y/CSC inspection valid until 08/2027 = Further Information = General Information Year of manufacture: May 2001 Model year: 2001 Weights Tare weight: 3,980 kg Payload: 32,019 kg Gross weight: 36,000 kg Functionality Internal volume: 30,850 l Body brand: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: good Gkodpfxjyyxaps Akajb Visual condition: good Additional Information Please contact Arne Honingh for more details.