Used Agiecut 150 Hss for sale (9,819)

Condition: used, Guillotine Shear LOTZE Type HSS 20 / 7 Machine no.: Year of manufacture: 1957 Cutting length: 2050 mm Cutting thickness: 7 mm Back gauge: 450 mm (adjustment range) Duodpfxjlmry Ee Ag Aop Working height: approx. 800 mm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Back gauge with handwheel adjustment and mechanical position indicator - Gauge adjustment via trapezoidal threaded spindles - Mechanical sheet holder - Simple left angle stop 680 mm - Two front table extensions 650 mm - Mechanical foot switch Space requirement without front table extension (L x W x H): 3040 x 1700 x 1740 mm Space requirement with front table extension (L x W x H): 3040 x 2350 x 1740 mm Weight: approx. 6 t

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Djdpjv Dxm Sofx Ag Asup Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds Dusdjquzd Rspfx Ag Ajp - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6413283, Year of construction: 2016, lifting height: 1,14,500 mm, fuel type: electric, mast type: triplex, power: 11 kW (14.96 HP), battery voltage: 48 V, battery weight: 1,920 kg, color: orange, Equipment: hydraulically sliding cabin, Up to 4 Toyota narrow aisle forklifts for sale. Having been sourced from a large industrial facility, these units are technically in a solid, well-maintained condition. All 4 forklifts have just received a fresh service. Technical details: Model: VCE150A Year of manufacture: 2016 Aisle width: 1,400-1,800 mm Rated capacity: 1,500 kg Own weight (without battery): 7,475 kg Battery voltage: 48 V Battery weight: min. 1,785 kg / max. 1,920 kg Maximum lift height: 11.45 meters Actual load capacity at max. height: 1,375 kg Load center: 620 mm System: Man-Up (operator is lifted with the load) Guidance: Equipped with inductive guidance system Special feature: Articulated chassis (bend steering) for minimal space requirement during aisle changes. Transport and loading can be organised Europe-wide for an additional fee, upon request. All prices are subject to VAT. Viewing possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, visit our website. Duedpfx Aeylixxjg Asp

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22499562/0001, volume flow: 200 m³/h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 11 A, type of input current: AC, type of cooling: air, rotational speed (max.): 1,450 rpm, protection type (IP code): IP55, Wilo - 2120809 - Standard single dry-running pump IL 150/190-5.5/4, DN150, 3x400V, 5.5kW Duodpfjynxi Ejx Ag Asp

Condition: refurbished (used), functionality: fully functional, For sale is a Christen AU-150 combined with the world-renowned HALLER UFS-155 – an extremely precise, compact, and versatile solution for grinding a wide range of cutting tools. This combination is renowned for the highest-precision production of corner radii, relief grinds, and complex geometries. Ideal for companies requiring flexibility, speed, and repeatability without needing to invest in large CNC machines. 🔧 Key Advantages - Precise helix grinding - Ultra-fast grinding of corner radii - Perfect for small batch production, tool repairs, and custom tools - Excellent for counterbores, slots, thread tap back-off grinding, and staggered-tooth side milling cutters - Easy operation – yet extremely precise results - Very compact design - High-quality mechanics and durable components - Ideal for training: optional know-how training available Dusdpfjx Dy Nwex Ag Aep 📐 Technical Highlights Christen AU-150: - Universal tool and cutter grinder - Precision guides and sensitive adjustment capabilities HALLER UFS-155: - High-precision universal tool and cutter grinder - Established for decades for its accuracy and stability - Perfect for slots, face geometries, and peripheral grinding applications This combination offers versatility otherwise found only in significantly more expensive CNC solutions. 🧰 Accessories: - Clamping devices - Grinding wheels - Operating manuals - Introductory training or expanded training package available

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm shaft width: 230mm max blade diameter: 350mm / 400mm blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm table length: 1900mm – from above: lock/blockers drive shaft, toothed shaft with saw blades 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table Dujdpfx Ageyh Np He Ajp feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2007, BRANYL - C CASSETTE 600x100-125-150 - 2007 - slovakian C cassette production line - see profile on photos - width 602 mm - no length limitation - heights 100, 125, 150 mm - rusty rolls can be cleaned - can be tested under power Dusdjymg Uyspfx Ag Aop - decoiler not in price, this costs extra

Condition: used, power: 95 kW (129.16 HP), Year of construction: 2019, operating hours: 3,420 h, Drive: Wheel Empty weight: 18.000 kg Please contact Emal Jaweed for more information Dsdpfx Asyr Dubjg Aeup

Condition: used, Year of construction: 1990, material width 150 mm material thickness 0,5 - 5,0 mm no. of straightening rolls 7 straightening roll diameter 45 mm number of draw-in rolls 2 inlet roll diameter 72 mm material thickness / at material width 3,0 / 150 mm Dujdpfx Agsvuk N Hj Aep material thickness / at material width 4,0 / 120 mm material thickness / at material width 5,0 / 80 mm power requirement 3,0 kW weight of the machine 0,7 t dimensions (WxDxH) 1,3 x 1,1 x 1,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: new, functionality: fully functional, fuel type: electric, color: yellow, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. Dusdpeyh Trlsfx Ag Aep The plant minimizes production time with its unique location just in front of the screen.

Condition: good (used), Year of construction: 2018, incl. 2 batteries and charger Dodpfjyhbphex Ag Aoup

Year of construction: 2003, condition: good (used), For sale is a 2 component injection molding machine brand Arburg and type 420 C The machine comes from a production where much importance is attached to maintenance and cleanliness. Likewise, the maintenance and repair are carried out there immediately by skilled personnel Arburg 420C 1000-150/60; clamping force: 1000 kN Year of construction 04/2003; screw diameter Ø25mm each installed; 9x mold heaters; 2x core pull hydraulic; 1x pneumatic valve gate; 9x temperature sensors; 1x cavity pressure sensor; Currently approx. 36,684 hours; 1x spare cylinder Ø18mm for unit 2 additionally available Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Dujdelwxpiepfx Ag Aop Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: new, Year of construction: 2025, functionality: fully functional, For sale is a new ABB IRB 6700-150/3.20 >>ORIGINAL PACKAGING, YEAR OF MANUFACTURE 2025 Manipulator: 435-114 Variant: IRB 6700-150/3.20 209-202 Manipulator color: ABB Graphite White standard 287-4 Version: Standard version 334-1 ABB logo on manipulator: With ABB logo 1999-1 Standard calibration method: Axis Calibration Dodpfx Agsyr R Ego Aoup Base: 700-3 Controller model IRC5: Single Cabinet Controller IRC5 129-1 Electromagnetic compatibility (EMC): Prepared for CE marking 769-2 Supply voltage: 400V supply voltage 752-2 Power connection: Power connection via HAN HSB 6p+E plug 742-1 Main switch: Main rotary switch 708-1 Control cabinet ambient temperature: Control cabinet ambient temperature up to max. 45°C 741-1 Plug field cover: Plug field cover for one field 438-1 Warranty period: Warranty period after delivery 18 months (partner)/12 months (end customer) Floor cables: 210-2 Manipulator cable: 7 m manipulator cable 16-1 Customer signal interface: Customer signal interface connected to control cabinet 94-1 Customer signal cable: 7m customer signal cable 859-1 Customer signal cable, ProfiNet: 7m customer signal cable, ProfiNet Control unit: 701-1 FlexPendant: FlexPendant with 10m connection cable 888-2 Profinet I/O: ProfiNet I/O Master/Slave software 941-1 Ethernet switch: Ethernet switch 1541-1 Base Dig. 16In/16Out: Base module Digital IO 16 In / 16 Out 1550-1 Conv.Tracking unit Int.: Conveyor Tracking unit Int. 1 727-1 Power supply 24V: Power supply 24V, 8A 731-1 Safety signals: Safety signals internal 996-1 Safety Module: Safety Module 997-1 Safety Network: PROFIsafe F-Device 1125-2 Safety Robot Supervision: SafeMove Pro 733-1 Operators panel: Operator panel on control cabinet 735-2 Operating mode selector switch: Operating mode selector switch with 2 positions for drive units 736-1 Service socket: Service socket 230V ROBOTWARE: 685-2 Robotware Version: Operating system RobotWare 6 606-1 Conveyor Tracking: Software option Conveyor Tracking 608-1 World Zones: Software option World Zones 611-1 Path Recovery: Software option Path Recovery 613-1 Collision Detection: Software option Collision Detection 623-1 Multitasking: Software option Multitasking Process: 455-8 Application signals: Parallel and Ethernet 778-1 DressPack process configuration: for material handling 798-3 DressPack variant: Base to axis 3 458-1 Mating connector set for user signals on axis 1 to 3 incl. BUS (CP/CS/BUS): Mating connector set for user signals on axis 3 incl. BUS (CP/CS/BUS) GENERAL: 448-2 Delivery project: Expanded Offer

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, For sale is an injection moulding machine from the brand Arburg, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. The machine is offered without peripherals. The rotary table, material feed, temperature control units, and other accessories are not included. Technical data: Year of manufacture: 2001 Clamping force: Clearance between tie bars: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Dusdpfx Agjx E U Ele Aep Ejector stroke: 175 mm Screw diameter: 25 mm Theoretical shot volume: 54 cm³ Shot weight: 45 g/PS Transport and loading can be organised on request, at an additional cost, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2003, operating hours: 69,000 h, functionality: fully functional, clamping force: 2,000 kN, For sale is an Arburg 570 C 2000 150/60 injection molding machine with three components. The machine is fully functional and, after assembly, is ready for use. The third injection unit is not functional because the protective housing was removed for transport. It will be functional again after assembly. Dusdpfx Agst Ug Uze Aop The third injection unit can be offered separately (stand-alone). Particularly noteworthy is the year of manufacture of the third unit: 2011 (see image). Technical specifications: Year of manufacture: 2003 Pump hours: 68,287 Cylinder: Ø 30 mm / SP150; Ø 18 mm SP 60 Length: 5,700 mm Weight: 5.7 t Equipment: Q-switch, conveyor belt, core pull, internal pressure Upon request, loading onto a truck and transport throughout Europe can be arranged for an additional charge. Prices plus VAT Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are available! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: ready for operation (used), Year of construction: 2004, clamping force: 500 kN, screw diameter: 25 mm, opening stroke: 350 mm, For sale is an injection molding machine of the company Arburg and the type 320 S 500-150 The company from which this machine originates attaches great importance to maintenance. The order of the machine was terminated and no follow-up order was set, so this machine was removed from production. The pump has a slight lack of pressure but is functional Technical data: Year of construction: 2004 Clamping force: 500 kN Screw diameter: 25 mm approach force: 35 kN Opening force 120 kN opening stroke 350 mm Dodpfx Agokwcydo Aeup clamping platen distance 575 mm Mold installation height 225 mm Prices plus value added tax Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: good (used), Year of construction: 1998, operating hours: 2,250 h, functionality: fully functional, machine/vehicle number: 174967, clamping force: 500 kN, overall weight: 21,300 kg, For sale: Injecting Molding Machine Arburg 320 S 500-150. The machine is in good condition. Manufacturer: ARBURG Model: ALLROUNDER 320 S Type / Version: 320 S 500 - 150 Machine number (Serial number): 174967 Year of manufacture: 1998 Clamping force: 500 Voltage: 400 V 3∼ Frequency: 50 Hz Operating hours: 2,250 Current (unknown): 0.3 A Connected load / Power (unknown): 1×15.00 kW Total weight (unknown): 21.3 t Transport and loading can be organized across Europe upon request (at an additional charge). Prices exclude VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production needs? Or do you want to sell your own equipment? For more information or to get in touch, please visit our website. Dujdpfx Asxvxrzjg Aep

Condition: ready for operation (used), Year of construction: 2001, clamping force: 500 kN, injection pressure: 2.2 bar, For sale is an injection molding machine of the brand Arburg and the type 320 S 500-150 The machine is in working order Technical data - Clamping force: 500 kN - Distance between the tie bars: 320 mm x 320 mm - Mold thickness: 225-350 mm - Clamping platen dimensions: 445 mm x 445 mm - Opening of the clamping platen: max. 550 mm - Screw diameter: 30 mm - Injection pressure: 2 200 bar - Weight: 2 250 kg On request, for an additional charge, dismantling, loading & transport can be organized for you throughout Europe Duedpfxoqmn Ege Ag Asp Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, opening stroke: 500 mm, For sale is an Arburg injection moulding machine, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. Technical data: Year of manufacture: 2001 Clamping force: 1000 kN Tie bar spacing: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Dusdpox Itamefx Ag Asp Ejector stroke: 175 mm Screw diameter: 25 mm Calculated shot volume: 54 cm³ Shot weight: 45 g/PS The machine is offered without periphery. Rotary table, material conveying systems, temperature control units and other accessories are not included.

Condition: new, 15.06 m shelving, 40 cm deep , Workshop shelving , Storage shelving , Manual storage , Push-in shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 40 cm - Length : approx. 15.06 running meters Shelf offer 15.06 running meters consisting of: - 016 x upright approx. 200 x 40 cm, disassembled (incl. 2 x base & 2 x cover cap). - 075 x shelf approx. 100 x 40 cm. - 300 x shelf holder. - 016 x Diagonal 1176 mm ( for crossing ). - 016 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. Djdpeyr Rilefx Ag Asup - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1648,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery can be carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, 30,06 m Shelving, 40 cm deep , Workshop shelving , Storage racks , Large capacity shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 40 cm - Length : approx. 30.06 running meters Shelf offer 30.06 running meters consisting of: - 031 x upright approx. 200 x 40 cm, disassembled (incl. 2 x base & 2 x cover cap). - 150 x shelf approx. 100 x 40 cm. - 600 x shelf holder. - 031 x Diagonal 1176 mm ( for crossing ). - 031 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Dedpfxjyr Rd No Ag Asup Price : 3661,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Pair of steel angle plates Duodpfx Aeyr D Izsg Aop Slots width: 22 mm Oblongs dimensions: 120 x 16 mm Width: 150 mm Depth: 445 mm Total height: 600 mm

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. Duedpfxefxygws Ag Aop The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 15257, We currently offer a "Thalmann" double folding machine in excellent condition for sale. Exact designation: THALMANN - Double Folder Folding Machine - Model TD 150 – 6.4 m Series AB-SE - 6 –150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm2) DFT System The machine is in very good technical and visual condition and is fully operational. Reason for sale: Due to an investment in a new EVOBEND double folding machine, the Thalmann is being sold. The machine runs perfectly and is in daily operation. Technical details: Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Bending beam width: 10 mm + 10 mm additional rail Max. bending capacity: S = 20 mm 1.5 mm steel sheet (Re 275 N/mm2) / 2.0 mm aluminium / 1.0 mm stainless steel 180° hemming performance: 50% of bending capacity Max. bending angle: 143° (1.0 mm: 135° / 1.5 mm: 130°) Bending precision: +/- 0.5° (with use of crowning) Number of grippers / Gripper travel: 4 units, +1, +1 / 15 mm - 1250 mm Max. gripper opening: 35 mm Number of backgauge fingers / travel: 4 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per set, repetitive accuracy Electrical voltage: 400 V / 50 Hz / 3 phase + E Rated current / fuse / pump: 32 A / 63 A / 22 kW, 75 cm³ Dimensions: 8050 x 2250 x 2100 mm Weight: approx. 10,000 kg Compressed air connection: 6 bar (incl. control, total 6 servo grippers, 6 backgauge fingers) Included additional equipment and features: - Free-running cutting automatic/"rotary shear": 1.5 mm steel: 1 pc - Curved clamping beam (bottom side), ratio H x T = 1:2: 1 pc Dujdjypxx Aspfx Ag Ajp - Tapered depth stop with 2-zone function: 1 pc - Additional gripper/finger stop unit: 1 pc - Clamping beams made of high-strength HARDOX steel: 1 pc - Hydraulic material thickness adjustment: 1 pc - Automatic sheet loading and support table: 1 pc - M-Guard remote maintenance support (instead of TeamViewer): 1 pc - LED bending line illumination with RGB color selection: 1 pc Additionally, the machine is designed so that the "turning unit" (see information on THALMANN AG website) could be retrofitted technically (as stated by the previous owner - no guarantee).