Used Akerman Ew 200 for sale (17,721)

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Bwedegkgwfjpfx Af Aeu Low hours in good working condition

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Bwodpfszvdftex Af Aju

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). The visual condition is very good, with only minor signs of normal use. Technical specifications: • Manufacturer: DELO Bodpfx Afozrv Hzs Ajwu • Model: DELO-UNIPRO • Part number: 95 200 01 • Serial number: 1501 UNI 648 • Power supply: 100–240 V AC • Frequency: 50–60 Hz • Power consumption: 40 W • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Bodpfszhw S Rox Af Aswu

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. Bwodpfxstu T I Ue Af Aju All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Year of construction: 2000, condition: used, Punching machine Premium quality Bwedpsg Dgyxofx Af Aou HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Bwodpfx Astu Truof Aju Type:CM2 Year: 2016 Output: 311Kw Мы говорим по русски! Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: ready for operation (used), Year of construction: 2021, overall weight: 217 kg, load capacity: 6 kg, arm reach: 2,011 mm, number of axes: 6, This 6-axis PANASONIC TAWERS TM-2000WG3 Super Active Wire was manufactured in 2021. It features a maximum reach of 2,011 mm and a payload capacity of 6 kg. The system includes a 350 A welding power source and is equipped with advanced welding processes such as SP-MAG and Pulse MAG. If you are looking to get high-quality welding capabilities, consider the PANASONIC TAWERS TM-2000WG3 Super Active Wire robot arm we have for sale. Contact us for further details. • Welding power source: 350 A • Welding processes: SP-MAG / Pulse MAG (MIG optional; TIG DC optional) • Repeatability: ±0.10 mm or better • Maximum robot rapid movement: up to 180 m/min • Motion ranges: base ±170°; upper arm -90° to +165°; forearm -80° to +210°; wrist rotation ±270° • Maximum axis speeds: base 195°/s; upper arm 197°/s; forearm 205°/s; wrist up to 629°/s • Wire feeding capability: Super Active Wire • Safety system: CE compliant Additional equipment • Güdel TMF-1 linear track (2,000 mm travel; repeatability ±0.02 mm) with drive, servo control and track structure • 2 × Panasonic servo-controlled rotary positioners + positioner servo control system • 2 × workpiece frames (approx. 3,500 × 1,500 mm) providing 2 welding/loading stations • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station Bwodpfx Afjz Dtn De Asu • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • Robot/positioner support structures • 2 × safety light curtains and complete cell guarding • Control and integration system • Robot controller / control cabinet Main Components Included • Panasonic TM-2000WG3 welding robot • Panasonic 350 A welding power source • Robot controller / control cabinet • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • 2 × Panasonic rotary positioners • Positioner servo control system • 2 × workpiece frames • Güdel TMF-1 linear track, 2 m • Linear track drive • Linear track servo control • Güdel track structure • 2 × safety light curtains • Robot / positioner support structures • Complete cell guarding • CE safety system • Control and integration system

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Bwjdjud R T Sjpfx Af Aou

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Bodpfxsy Ir Nyj Af Ajwu Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: - Light curtain / light barrier - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable by station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: like new (used), Year of construction: 2018, operating hours: 4,918 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: TOYOTA LPE 200 * EX * Pyroban 3D / Zone 22 * ID: 24090.5905 Category: Used Forks: 1150 x 570 mm Capacity: 2000 kg Year: 2018 Operating hours: 4918 hours Bodpjzut Arjfx Af Aswu Battery: Completely NEW * 24v / 344ah * Year 2025 Options: * EX * Atex - Pyroban !!!! Gas group = IIIB Type = 3D (approved for ZONE 22) Temperature class = T4 (135°C)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SD1-200-0051, functionality: fully functional, operating hours: 4,800 h, power: 59 kW (80.22 HP), input voltage: 380 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, stroke length: 250 mm, operating speed: 50 mm/s, table width: 870 mm, table length: 1,300 mm, table height: 1,020 mm, throat depth: 435 mm, ram plate width: 670 mm, ram plate length: 1,000 mm, distance table to ram: 450 mm, clearance between the columns: 1,500 mm, oil tank capacity: 70 l, total length: 2,761 mm, total width: 2,224 mm, total height: 3,819 mm, overall weight: 24,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, SEYI SD1-200 Straight Side Servo Press, 200 Ton Capacity High-performance servo-driven stamping press designed for precision metal forming, blanking, punching, and progressive die applications. The machine features a rigid straight-side frame construction, programmable servo slide motion, tonnage monitoring, electronic overload protection, and a user-friendly touchscreen control system. The servo drive technology provides optimized ram movement, improved forming accuracy, reduced tooling wear, lower energy consumption, and increased production flexibility compared to conventional mechanical presses. The machine is suitable for automotive, appliance, electronics, and general sheet metal manufacturing. Technical specifications include: Press capacity: 200 ton Stroke length: 250 mm Bjdpjz Ipxaefx Af Ajwu Slide area: 1,000 x 670 mm Bolster area: 1,300 x 870 mm Die height: 450 mm Main motor power: 59 kW Power supply: 380-440 V / 50-60 Hz / 3 Phase Machine weight: 24,000 kg Safety light curtain installed Documentation available CE marked The machine is in good working condition and available for inspection. Additional photographs, videos, and technical documentation can be provided upon request. Ideal for high-precision production environments requiring productivity, repeatability, and energy-efficient operation.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Bwedpsytr Swefx Af Aou Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: excellent (used), Year of construction: 2010, 200hl Steinecker Krones Brewhouse. Capable of 6 brews per day. Location: UK Available Immediately Including: • Steinecker Mill • Steinecker Cereal Cooker • Steinecker Mash Vessel • Steinecker Lauter Tun • Steinecker Holding Vessel • Steinecker Lauter Worth Heater • Steinecker Copper • Steinecker Whirlpool • Steinecker Wort Cooler • HLT & CLT • Hop Pellets Station Bodpfxexb Uz Ae Af Aewu • Vapour Condenser • Condensate Cooler • Spent Grain System Contact Indassol UK for Pricing and more details. We are at Drinktec - Please reply to set up a meeting to discuss further.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Barely used Bedpfjvt Sgdsx Af Aowu

Condition: excellent (used), Year of construction: 2006, Viessmann Vitorond 200 Output: 160 kW Burner: Weishaupt oil or gas burner available upon request Viewing by prior telephone arrangement only! Bjdpfxsmnqc Ho Af Ajwu Preferred sale to dealers, tradespeople, or for export. All information is provided without guarantee; errors and prior sale excepted. The seller accepts no liability for typing or data transmission errors. We will, of course, handle all formalities Loading possible

Condition: like new (used), Year of construction: 2017, operating hours: 1,242 h, load capacity: 2,000 kg, lifting height: 2,150 mm, fuel type: electric, mast type: duplex, construction height: 1,750 mm, Manufacturer + model: BT SWE 200 * EX * Pyroban 2G / Zone 1 Mast: 2W2150 ID: 24110.7680 Category: Used Mast: 2W2150 Lowered height: 1750 mm Lifting height: 2150 mm Capacity: 2000 kg Year: 2017 Hours: 1242 hours Capacity: NEW * 24v / 255ah * Manufactured 11/2024 Options: * EX * Atex - Pyroban !!!! System = Ex - Tec 2G Bwsdpfezv H Svox Af Aeu Gas group = IIB Type = 2G (allowed in ZONE 1 & 2) Temperature class = T3 FEM 2 forks – adjustable tines

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Bwsdpfx Afjykrtpo Aju Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) Bwsdpfx Aeylynwof Aeu • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: good (used), Year of construction: 2017, operating hours: 6,925 h, functionality: fully functional, machine/vehicle number: 6700-111941, overall weight: 1,170 kg, load capacity: 200 kg, arm reach: 2,600 mm, This is an ABB IRB 6700-200/2.60 industrial robot with an IRC5 controller and an RW6 PC, manufactured in 2017. We would also be happy to offer this robot to you as a fully refurbished unit! The controller includes the following options: Bwodpsz Imldofx Af Aeu 709-1 DeviceNet Master/Slave 888-2 PROFINET Controller/Device 963-1 PROFIenergy 997-1 PROFIsafe F-Device 687-1 Advanced Robot Motion 603-1 Absolute Accuracy 988-1 RW Add-In Prepared 606-1 Conveyor Tracking 608-1 World Zones 610-1 Independent Axis 611-Path Recovery 612-1 Path Offset 885-1 SaveMove 1180-1 ToolControl 613-1 Collision Detection 614-1 FTP, SFTP, and NFS client 616-1 PC Interface 688-1 RobotStudio APP Connect 623-1 Multitasking 624-1 Continuous Application Platform 813-1 Optical Tracking 625-1 Discrete Application Platform 628-1 Sensor Interface 689-1 Externally Guided Motion (EGM) 996-1 Safety Module 735-7 Keyless Mode Switch, 3 modes 1341-1 /1520-1 Integrated Vision Interface 630-1 Servo Tool Change

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Bwjdpfx Aoz Ipm Rsf Aeu Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Bwjdpfx Aeva Hupof Aju Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- 37 cm height-47cm length-8cm Bwsdpfxsqvuicj Af Aju

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Bjdjvugz Eepfx Af Aowu Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: reconditioned (used), Year of construction: 2011, operating hours: 1,554 h, functionality: fully functional, overall weight: 1,500 kg, HAKO JONAS 1200 E Sweeper New Hawker Perfect Plus 24V 420 Ah (7PZS420) traction battery New Neos 24V 50A charger New air filter Year of manufacture: 2011 Machine operating hours: 1,554 Built-in warning light and full front/rear road lighting A new, innovative cylindrical brush combined with a new anti-static side brush (mixed-bristle) ensures excellent sweeping results Bwsdpfjz D D Nxsx Af Asu A high-performance dust extraction turbine and new sealing skirts around the main brush prevent fine dust from rising during sweeping The machine features a large-debris flap for collecting larger waste items The unit has undergone a comprehensive, meticulous overhaul; operating fluids and components—such as bearings, drive belts, and sealing skirts—have been replaced with new ones. Each unit we offer features actual photos; you are buying the exact machine shown. TECHNICAL DATA: Model: Jonas 1200 E Sweeping width (mm): 800 Sweeping width with one side brush (mm): 1150 Coverage with one side brush (m²/h): 9300 Sweeping speed (km/h): 8 Hopper capacity (l): 130 Filter area (m²): 5 Dimensions L x W x H (mm): 1998 x 1142 x 1520 Weight ready for operation (kg): ~1500 INCLUDED: NEW HAWKER PERFECT PLUS traction battery 24V 420 Ah (7PZS420) NEW NEOS charger 24V 50A NEW air filter NEW anti-static cylindrical brush – mixed bristles NEW anti-static side brush – mixed bristles NEW cylindrical brush skirt/seals Built-in warning light Full front/rear road lighting Waste hopper (130L) KEY FEATURES: Ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the cleaning area. The Jonas 1200 E sweeper is the perfect machine for efficient, cost-effective sweeping of multi-level parking garages, warehouses, production facilities, and outdoor areas. Battery power ensures high flexibility, allowing for operation in enclosed spaces and buildings. warehouse halls A large working width (1,150 mm) ensures high area coverage. Highly legible and intuitive control panel.