Used Airless Paint Sprayer for sale (4,559)

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 25,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 213 kW (289.60 HP), filter area: 25 m², power: 15 kW (20.39 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 250 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 250 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime Hjdox Tiz Dopfx Adwong 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 250 is equipped with an integrated heating system with a Riello 40 G20 burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 25,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Hnjdpfx Adsia Ta Rsweg We can manufacture filtration supply (new air to sprayroom). Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: good (used), Paint casting machine, paint casting station Hedpfec R Iyajx Adwjng -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Hnjdpfxsu T Hrpe Adwog Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: excellent (used), Unit with supply air heating in excellent condition Hnedpfx Aexpg Dxedwsg

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? Hsdpfx Adjxa H Ewjweng We are happy to assist you.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 4,350 mm, total length: 8,000 mm, total width: 6,400 mm, volume flow: 35,000 m³/h, type of input current: three-phase, overall weight: 3,800 kg, working width: 3,500 mm, warranty duration: 12 months, workpiece weight (max.): 4,200 kg, inner dimension height: 3,500 mm, inner dimension length: 7,900 mm, load capacity: 4,200 kg, inner dimension width: 4,900 mm, heating capacity: 290 kW (394.29 HP), filter area: 32 m², power: 22 kW (29.91 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 350 – Professional Spray Booth for Vans & Buses Large Format. High Airflow. Built for Commercial Vehicles. ⚡ Professional full downdraft spray booth for vans & buses ⚡ Designed for body shops specializing in commercial vehicles ⚡ Large working volume, stable airflow and optimized operating costs ⚡ Designed and delivered in full compliance with EU regulations 🔑 Key Advantages for Vans & Buses ✔ Large internal dimensions optimized for vans & buses ✔ Full downdraft airflow – consistent paint quality on large panels and roofs ✔ High-capacity DDF fans with VFD control ✔ Increased airflow for high cabins and long vehicle bodies ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive, multi-shift professional use 🌬️ Airflow Concept – Full Downdraft for Vans & Buses The Ventis Nexus 350 operates in a full downdraft configuration, specifically optimized for vans & buses. uniform airflow on roofs, sides and rear sections reduced dust contamination on large surfaces Hnjdpfjx Tiwrox Adwsg consistent, repeatable paint finish on vans & buses 🔧 Fans & Airflow Control – DDF + VFD Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Total installed fan power: 22 kW Airflow capacity: approx. 35,000 m³/h Benefits: stable airflow even with tall vehicles precise airflow regulation in painting and drying modes lower energy consumption compared to fixed-speed systems no belts or pulleys = reduced maintenance and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding commercial vehicle workshops 🔥 Heating System Integrated high-capacity heating system featuring a Riello RG5S burner (290 kW), providing: uniform warm air distribution throughout the entire booth stable curing conditions for large vehicle surfaces fast temperature build-up and reduced drying times, even with high air volumes 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application on vans & buses ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed steel front doors – wide access for vans & buses Side technical service doors for maintenance and inspection Integrated LED lighting for bright, uniform illumination of large vehicles 📐 Dimensions & Technical Data Internal dimensions: approx. 8,000 × 5,000 × 3,500 mm Airflow capacity: approx. 35,000 m³/h Total fan power: 22 kW Heating capacity: Riello RG5S – 290 kW ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or paint mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty: 12 months ✔ EU-based technical support and service

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Suction area - dimensions (mm): 2190w)x2350(h) Overall dimension (mm): 2295(w)x2295(h)x1910(d) Technical data: - Fan power 2.2 kW (ATEX) - Fan suction power: 12000 m³/h (max. 1100Pa) - Lighting: 1pc 2x58W (ATEX) Hodpfxjia Taqj Adweng - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h Hedehby Riepfx Adwjng dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: as good as new (ex-display), Year of construction: 2026, The captivating advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working climate due to diagonal low-turbulence air flow. Large airflow window due to air baffles - therefore also suitable for larger workpieces. Separation efficiency of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² - therefore long filter life! Easy and quick filter change on the front side. Inexpensive replacement filters. Low purchase costs and extremely low energy consumption. Dry splashboard made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fibre filter as after-filter unit. Ex-fan incl. throttle valve mounted on the left. Do not compromise on the quality of the surface. Easy Paint extraction walls are the ideal cost-effective solution for effective collection and filtering of paint mist and extraction of solvent vapours. Robust and powerful but economical in consumption. The IPE double filtration system provides two filter stages for a maximum separation efficiency of up to 99 %. The cardboard labyrinth filter initially absorbs considerably more overspray (up to 18 kg/m² filter surface) than conventional filter mats due to the folded filter pockets. The downstream glass fibre secondary filter absorbs only the finest residual particles. Hedpfx Ascnz Iqjdwong As a guide value, the cardboard labyrinth filter, depending on

Condition: excellent (used), Servatechnik extraction Hnedpfex Nbnnjx Adwog

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS Hnodewzmcbspfx Adwjg During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,550 mm, total length: 2,430 mm, total width: 2,330 mm, volume flow: 1,000 m³/h, type of input current: AC, overall weight: 1,200 kg, warranty duration: 12 months, power: 1 kW (1.36 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Paint Mixing Lab – Professional Paint Mixing Room Clean Air | Safe Handling | Workshop Integration ⚡ Professional paint mixing room designed for body shops and industrial coating facilities ⚡ Controlled ventilation for safe paint handling and mixing ⚡ Compact footprint – ideal for integration with spray booths and prep stations ⚡ CE-compliant solution for professional workshop environments 🔑 Key Advantages ✔ Controlled airflow for safe paint mixing ✔ Effective removal of vapours and airborne contaminants ✔ Improved working safety and paint quality ✔ Compact, modular construction ✔ Designed for daily professional use 📐 Dimensions & Electrical Data External dimensions: 2330 × 2430 × 2550 mm Power supply: 220 / 380 V Installed power: approx. 0.5 kW 🌬️ Ventilation & Filtration The Ventis Paint Mixing Lab is equipped with a dedicated ventilation system designed specifically for paint mixing operations. Axial ventilation fan: 370 W High-efficiency filtration system Continuous extraction of vapours and airborne particles This ensures: clean air in the working zone reduced exposure to harmful substances compliance with professional workshop safety requirements 🧱 Construction EPS insulated wall panels, powder-coated steel finish Durable construction suitable for workshop environments Easy-to-clean interior surfaces 🚪 Access Working door width: 1800 mm Comfortable access for operators and materials 💡 Lighting Hjdpox Thbvefx Adwsng Integrated LED lighting (16 W) Clear, uniform illumination for safe and precise work 🖥️ Application ✔ Paint mixing ✔ Material preparation ✔ Storage and handling of paints and coatings Designed as a dedicated mixing room, reducing contamination and improving workflow efficiency between preparation and painting areas. 🛡️ Certification & Warranty ✔ CE certified ✔ Manufacturer warranty 🚚 Delivery & Installation ✔ Delivered as a complete system ✔ Professional installation and commissioning available ✔ Integration support with existing spray booths and prep stations 📩 Contact us for availability, configuration options and a tailored offer. The Ventis Paint Mixing Lab is an essential element for workshops aiming to increase safety, cleanliness and efficiency in their coating process.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x810(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Hnodpfx Ajia Ta Usdwsg Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: as good as new (ex-display), Year of construction: 2026, The impressive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and a pleasant working environment due to diagonallow-turbulence air-stroemung. Large detection window thanks to air guide plates – thus also suitable for larger factory troughs. Separation degree of paint mist up to 99%, return ability of the pre-filter up to 18 kg/m2 - thus great filter life! Easy and fast filter change on the front. Cost-cost replacement filters. Low acquisition costs and low energy requirements. Dry spray wall made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fiber filter as post-filter unit. Ex-fan incl. throttle valve attached to the left. Do not compromise on the quality of the surface. Suction-weighing Easy Paint are the ideal cost-effective application for the effective detection and filtering of the paint mist as well as the suction of the solvent dimempfe. Robust and powerful but economical in consumption. Thanks to the IPE double filtration system, two filter levels ensure a maximum separation degree of up to 99%. Thanks to the folded filter pockets, the cardboard labyrinth filter absorbs considerably more overspray (up to 18 kg/m2 filter area) than conventional filter mats. The downstream fiber glass fiber second-based filter absorbs only the finest residual particles. As a guideline, the cardboard labyrinth Hnjdpfxjdqc U He Adwsg

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: Hodswzl Hxopfx Adwsng During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, volume flow: 12,500 m³/h, type of input current: three-phase, overall weight: 1,800 kg, working width: 4,000 mm, warranty duration: 12 months, inner dimension height: 3,000 mm, inner dimension length: 7,000 mm, filter area: 25 m², power: 10 kW (13.60 HP), Equipment: documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Prep-Station – Professional Preparation Workstation Clean Airflow | Efficient Preparation | Workshop Integration ⚡ Professional prep station for sanding, masking and surface preparation ⚡ Designed for daily use in body shops and refinishing centers ⚡ Optimized airflow for dust extraction and clean working conditions ⚡ Modular design – easy integration with spray booths and workshops ⚡ EU-compliant solution for professional environments 🔑 Key Advantages ✔ Clean and controlled airflow in the preparation zone ✔ Effective dust and particle extraction ✔ Improved working conditions and surface quality before painting ✔ Reduced contamination transferred to the spray booth ✔ Compact, modular design ✔ Designed for intensive daily workshop use 🌬️ Airflow & Ventilation Concept The Ventis Prep-Station is designed to provide stable, directional airflow in the working area, efficiently removing sanding dust and airborne particles. Optimized airflow across the work zone Efficient extraction of dust and preparation residues Cleaner environment for operators and surrounding areas The system supports: improved surface quality before painting reduced rework and contamination inside the spray booth 🧱 Construction & Design Hjdpsx Tg Syefx Adwong Robust steel structure suitable for workshop environments Modular configuration – single or multi-bay layouts possible Designed for flexible installation and future expansion 🧼 Filtration System Multi-stage filtration system for effective dust capture: Primary filters for coarse particles Fine filtration for airborne dust Easy access for maintenance and filter replacement Ensures clean exhaust air and compliance with workshop standards. 💡 Lighting Integrated LED lighting Bright, uniform, shadow-free illumination Improved visibility during sanding and preparation work 🖥️ Control System Simple and reliable control panel Control of ventilation and lighting Designed for everyday workshop operation 📐 Configuration & Options Single or multi-bay prep stations Integration with spray booths and mixing rooms Custom dimensions and layout on request Optional enclosure panels and airflow configurations 🚚 Delivery & Installation ✔ Professional installation and commissioning available ✔ Integration support with existing workshop layouts ✔ EU-compliant documentation 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation Hsdeia Tauspfx Adwong - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, Type and specifications The distinctive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working environment by diagonal low-turbulence airflow. Large capture window by air deflectors - suitable even for large workpieces. Separation of paint mist up to 99%, rear retaining capacity of the filter up to 18 kg / m ² - big filter booth time! Quick and easy filter change on the front page. Low-cost replacement filters. Hsdpfjb R D U Sex Adwjng Low cost and extremely low energy consumption. Dry spraying wall of galvanized steel with welded base frame, cardboard labyrinth as a preliminary filter and glass fibre filter as a post filter unit. Grown ex fan incl. throttle links. Make no compromises in the quality of the surface. Suction walls easy paint are the ideal low-cost solution for the effective detection and filtering of paint mist, as well as extraction solvent vapours. Robust and powerful but economical in use. Standard suction power of easy paint 3500 model 600025 air performance on standard delivery * 3500 m ³/h filter surface primary 2,5 m² filtration area secondary 2.0 m ² power motor 400V/50 Hz * ex 1,1 kW Connection pipe suction pipe D 300 mm width in mm = 2750 overall height 1455 mm Depth in mm with capture window 855 weight in kg 145 Stando

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 25,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 213 kW (289.60 HP), filter area: 25 m², power: 15 kW (20.39 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 250 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 250 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Hjdpfx Adsx Tg Nfjwong Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 250 is equipped with an integrated heating system with a Riello 40 G20 burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 25,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, Paint/spray booth Hsdpeia Taxofx Adwong dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x1910(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Lighting: 2 pcs 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 6,200 mm, total length: 15,150 mm, total width: 7,400 mm, volume flow: 55,000 m³/h, type of input current: three-phase, overall weight: 8,200 kg, working width: 6,000 mm, warranty duration: 12 months, workpiece weight (max.): 12,000 kg, operating pressure: 8 bar, inner dimension height: 5,500 mm, inner dimension length: 15,000 mm, inner dimension width: 6,000 mm, control cabinet length: 15,000 mm, air demand: 500 m³/h, operating temperature: 80 °C, working height: 5,500 mm, input voltage: 380 V, heating capacity: 448 kW (609.11 HP), power: 52 kW (70.70 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis TITAN 550 – Industrial & Cargo Spray Booth Heavy-Duty | Integrated Heating | DDF Fans with VFD Control ⚡ Professional industrial spray booth for trucks, buses, trailers and oversized components ⚡ Designed for continuous heavy-duty operation ⚡ Integrated industrial heating system as standard ⚡ High airflow volume with precise electronic control ⚡ EU-compliant solution for professional workshops 🔑 Key Advantages ✔ Extra-large internal working space ✔ Full downdraft airflow for consistent coating quality ✔ Integrated heating system – standard ✔ Direct-Drive Fans (DDF) with Variable Frequency Drives (VFD) ✔ Lower energy use and reduced maintenance vs belt-driven systems ✔ Robust insulated steel construction ✔ Designed for multi-shift industrial use 📐 Dimensions External (L × W × H): 15,150 × 7,400 × 6,200 mm Internal (L × W × H): 15,000 × 6,000 × 5,500 mm Power supply: 380/400 V | 50–60 Hz | 3 Phase 🌬️ Ventilation System – DDF + VFD High-capacity industrial ventilation system based on Direct-Drive Fans (DDF) combined with VFD control. Inlet fans: 4 × 7.5 kW (DDF) Exhaust fans: 2 × 11 kW (DDF) Benefits: no belts or pulleys precise airflow regulation lower noise and energy consumption soft start / stop and longer component lifetime Ensures stable airflow, efficient overspray extraction and uniform coating quality across large surfaces. 🔥 Heating System Integrated industrial heating system designed for large air volumes. Burners: 2 × Riello G20 Heat exchanger: SUS304 stainless steel, 1.5 mm Max. baking temperature: 80°C Heating performance: 20°C → 60°C in approx. 8–10 min Insulated heating cabinets (rock wool) 🧱 Construction & Access 75 mm EPS insulated sandwich panels 0.5 mm galvanized steel skin Main door: 4-leaf folding, 5,000 × 5,000 mm Service door: 800 × 2,000 mm 💡 Lighting & Filtration LED lighting: ceiling and side walls, bright and shadow-free Multi-stage filtration system: Primary filter: >10 μm (≈83%) Hnodpfx Aex Tf I Tedwog Ceiling filter: >4 μm (≈98%) Wall exhaust filter: fiberglass (≈70%) 🖥️ Control System Intelligent control cabinet Integrated control of ventilation (VFD), heating, lighting Painting and drying modes Overload and phase-loss protection 🚚 Delivery & Support ✔ Professional installation and commissioning available across the EU ✔ Support with permits and technical documentation ✔ Manufacturer warranty and EU-based service 📩 Contact us for availability, delivery time and a tailored offer. Ventis TITAN 550 is built for customers who require maximum space, precise airflow control and reliable heating as standard.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, lighting, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 1600(w)x1900(h) Overall dimension(mm): 1700(w)x2350(h)x1910(d) Hsdpfx Adoia Taiewsng Technical data: - Fan power 2.2kW (ATEX) - Fan suction capacity: 12000 m³/h (max 1100Pa) - Lighting: 1pc 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 30,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 290 kW (394.29 HP), filter area: 25 m², power: 18 kW (24.47 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 300 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 300 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Hjdpox Tc Dxjfx Adwsng Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 300 is equipped with an integrated heating system with a Riello RG5S burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 30,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Equipment: cabin, documentation/manual, emergency stop, lighting, dimensions without fan and control panel! Work area - dimensions (mm): 990(w)x800(d)x1100(h) Overall dimension(mm): 1100(w)x1900h)x1100(h) Technical data: - Fan power 1.1kW (ATEX) - Fan suction capacity: 4100 m³/h (max 750Pa) - Lighting: 1pc 2x18W (ATEX) - Connection voltage: 230V - Frequency converter for smooth regulation of the fan Hodeia Tabjpfx Adweng - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.