Used Ais for sale (3,844)

Condition: excellent (used), Year of construction: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Bodpfxoxdwkfs Addelr Maximum feed force in the X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table dimensions: 1,000 × 14,000 mm Number of T-slots in the table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in the spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be provided by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Year of construction: 2023, operating hours: 109 h, condition: like new (used), functionality: fully functional, High-performance extraction unit for aluminium chips MG 9V Centrifugal fan with soundproofed housing, M-class filter, chips fall downwards into a customer-supplied container, max. drop height 1,100 mm Drive: 4.0 kW, 400 V, 50 Hz, max. air volume flow 4,000 m3/h, noise level below 80 dB(A), selector switch for continuous operation or control via the saw. Equipped with 2 connection nozzles D160 mm, dimensions when assembled: 1825 x 1140 x 4675 mm, finish RAL 9016 Bjdexmhkbepfx Addolr

Condition: used, Hydraulic operation via foot switch Profile height max. 120 mm Abutment stroke 100 mm Punching stroke 50 mm Press force 38 kN Engine power: 3 kW Bsdew U Slgopfx Addolr Weight approx. 500 kg

Condition: used, mileage: 2,97,830 km, power: 331 kW (450.03 HP), first registration: 04/2020, overall weight: 32,000 kg, fuel type: diesel, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, Equipment: had accident, Suction and jetting combination unit by Swiss bodybuilder Kaiser, model Twister Komfort. The vehicle has damage on the left side; engine, transmission, and superstructure are functional. - Kaiser Twister Komfort - Tank material: Stainless steel V2A - Sludge chamber: 14 cbm - Fresh water chamber: 2.5 cbm - Vacuum pump: Kaiser KWP 3100i - High-pressure pump: Patissoli KF 30 approx. 106 l/min 200 bar - Radio remote control - Suction boom - EURO 6 - Automatic transmission with clutch pedal Bsdjxlmrbopfx Addolr - Additional pictures or videos can be provided on request. - Accident damage on the left side - Financing available through our partner banks—we are happy to assist you. We expressly reserve the right to prior sale, as this item is also advertised on other platforms. Accessory information provided without guarantee. Subject to change, prior sale, or mistakes. We offer and strongly recommend viewing and inspection to ensure the buyer has an accurate understanding of the condition and suitability. Viewings and inspections are possible at any time by appointment and expressly encouraged.

Condition: ready for operation (used), Matsushita NAIS ANL2535E LM Laser Analog Sensor ,used, normal signs of wear, 100% functional, scope of delivery according to photos Blsdpfxei Eb A Ro Addsr

Condition: ready for operation (used), functionality: fully functional, Molift Quick Raiser 1 Bsdpfsxaqh Aox Addjlr Compact design and excellent manoeuvrability even in narrow spaces Compact and easy By virtue of its compact design and low weight, Molift Quick Raiser 1 is stable and easy to manoeuvre. The unique wheel position and near perfect weight distribution of the base provides a small turning radius with easy manoeuvrability even in narrow spaces. Natural pattern of movemen The inclined straight column imitates the natural pattern of movement and fulfils the hoisting needs of users with some degree of weight bearing capacity. Molift Quick Raiser 1 has a safe working load of 160 kg (352 lbs.) The extra low base, 7 cm (2.8”), and narrow front, 34 cm (13.5”), fits well around toilets and under most beds, chairs and wheelchairs. We have two units in stock, price is for one unit only. Good working condition. Please check out our other listings as well.

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: Bljdpfx Adjmb U E Asder - Notching possibilities + miters in 3 planes - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Condition: like new (used), Year of construction: 2024, operating hours: 9 h, functionality: fully functional, machine/vehicle number: 190551920245099737, saw blade diameter: 500 mm, We are selling a saw-drilling-threading automation machine, Profilma 540 BG, designed for cutting to length, drilling, and threading of aluminium profiles. This is a special-purpose machine that was purchased for the production of solar components. The scope of delivery includes: - Roller conveyor RD500, length 6000 mm Bledexmhhgspfx Adder - Pre-installation for chip extraction MG9 - Database for storing cutting data under profile number - 32 pcs combined machine taps M8x1.25 - 2 pcs carbide saw blades 500x3 mm The machine has only 9 operating hours.

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Blodpfx Ajw Inudjddor Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Year of construction: 2017, condition: new, machine/vehicle number: 185426043, Backhoe bucket MS21/25 Specifications Manufacturer Manfred Kaiser - Maschinenbau GmbH Equipment type backhoe bucket MKS 21 cutting width 800mm Capacity 0,8cbm Weight 710kg Year of manufacture 2017 Bodpfx Aomwitpoddjlr Features Backhoe bucket 0,8m NEW 4 times available Additional Information Equipment: excavator arm, Purpose: construction, Unloaded weight: 710 kg, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 shipping EU ~300euro Bedpfxjl Skl Is Addolr

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s Blsdpfx Aow D T Uijddor - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 2455, Offer 25293 Technical data: - Max. profile height up to 160 mm - Max. profile width 100 mm - Repetition stroke 100 mm - Punch stroke 20 mm - Punching force at 6 bar: 35 kN - Operating pressure: 6 – 8 bar Bljdpfx Adjxdh Uzsder - Air consumption per cycle approx. 30 l - Equipped with: - Foot switch - 2 vertical pneumatic hold-down devices - Adjustable punching heads - 2 swiveling support arms - Required space approx. W 980 x H 1400 x D 800 mm - Weight approx. 180 kg

Condition: like new (used), Year of construction: 2024, operating hours: 190 h, functionality: fully functional, machine/vehicle number: 190551920245099676, saw blade diameter: 500 mm, We are selling a saw automatic saw-punching solution Profilma 502ST-V for cutting to length and punching aluminium profiles. This is a special-purpose machine that was acquired for the production of solar mid clamps. Bjdpfxexmhf Ej Addelr

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1015, profiles with dimensions (HxB) up to 100x195mm, 80x200 mm Bjdpfxowgmv Sj Addolr automatic work cycle driven by a 3 kW/400 V, 2850 rpm motor cutting disc d=450x3.8x40mm, z=110 horizontal and vertical material clamping on the feed side dosing spray system horizontal material clamping in the feeder moving both clamping jaws when retracting (prevents scratching of the profile) infinitely adjustable hydropneumatic cutting disc feed cutting disc exiting from the rear length of cut sections adjustable in the range of 0-300mm (with reversing device 0-600 mm) setting the cutting length by a handwheel with a mechanical counter maximum width of the cut profile 200 mm cutting range (height x width) 100x195mm, 80x200mm automatic shutdown when material runs out possibility of connecting a dust extractor

Year of construction: 2000, condition: used, Max. saw blade diameter: 350 mm Pneumatic material clamps Micro spray device Blsdpfxsw Ddzte Adder Saw table can be rotated in both directions

Condition: excellent (used), Year of construction: 1988, Type: AKF 300 Motor: 400V 2.2kW Speed: 2800 rpm Cutter O: 300 mm Bodpfx Aderblb Rsdjlr

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Bjdpjtq Takofx Addjlr Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 5,50,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. Bedsvtarnopfx Addslr The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Bsdpfx Adjfcbb Hjdslr

Condition: used, Year of construction: 1995, machine/vehicle number: 9104, Offer 24237 Bodpfx Adeub Sl Dodslr Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - horizontal 400 x 3.5 x 40 mm - Notching range / notching depth vertical 135 mm - Notching range / notching depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade can be manually tilted 90° - 30° via handwheel - Can be used as a shifter saw without horizontal saw blade - Profile stop shoulder 30° - 90° - 30° tiltable - Digital display - Pneumatic material clamping vices - Pneumatic coolant testing device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Max. daylight = 280 mm Dimension 60 x 850 x 1500 mm Weight 300kg Bledefitbwjpfx Adder

Condition: good (used), Year of construction: 2019, machine/vehicle number: 250-19, Offer 25283 Technical Specifications: Bjdpfx Aow Nhumeddolr - Saw blade speed, frequency controlled, for very fine cutting - Saw blade diameter: 200 mm - Automatic operation cycle - Pressure stop with SICO counter for setting the glass pressing force - Simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand

Year of construction: 1991, condition: excellent (used), Punching machine Bledol H Hyqepfx Adder Presta Eisele HPS 120

Condition: good (used), Year of construction: 2019, machine/vehicle number: 252-19, Offer 25269 Technical specifications: - Saw blade speed, frequency-controlled for ultra-fine cutting - Saw blade diameter: 200 mm - Automatic work cycle - Pressure stop with SICO counter for setting glass contact pressure – simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm Bledpfjw R S Nwex Addjr - Weight: approx. 80 kg - Machine stand