Used Alpha Tools Caps Saw for sale (31)

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Includes special equipment: Tilting-swiveling objective, LED-UW Ergonomic wedge, 5-25 degrees Fsdpfx Aaszyzwnetspl Aluminum light case Camera set ALFT-HDMI Optional, if required: Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 New price: €130,000.00

Condition: used, MDR 2000 Moving Die Rheometer • Closed, bic conical chamber system • Fast microprocessor for temperature control • Torque measurement via friction-free torque transducer • High precision, high efficiency Fpjdpszul Dbsfx Aatel • Automation option for maximum productivity State-of-the-art vulcanization technology The MDR 2000 Moving Die Rheometer from Alpha Technologies has become the global standard for vulcanization technology. Two directly heated, bic conical tool halves with low mass provide fast and accurate temperature recovery. The oscillating lower tool half eliminates the need for a rotor, as in the Oscillating Disk Rheometer (ODR 2000). This results in faster temperature recovery and greater data accuracy. The resulting torque is measured by a torque transducer in the upper tool half, ensuring that friction forces from bearings and seals no longer affect the torque measurement. The torque signal is calibrated using a torsion spring rod with known values. This ensures long-term accuracy, repeatability, and reproducibility of the data. The unique closed chamber system enables above-average reproducibility and sensitivity to variations in the compound. Fast-responding temperature control is ensured by an optimized system. These properties, combined with a highly sensitive torque transducer and state-of-the-art microprocessor technology, offer the best in networking technology.

Condition: like new (used), Year of construction: 2021, operating hours: 3,006 h, functionality: fully functional, machine/vehicle number: 00161215-02.18, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 910 kg, type of cooling: water, electrical fuse: 16 A, laser power: 900 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, travel distance X-axis: 320 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 370 mm, Equipment: head guard, We are selling a laser welding machine in excellent condition. Fedpfx Aajzw Eu Sjtepl

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 1,770 mm, total width: 600 mm, total length: 617 mm, input voltage: 230 V, type of cooling: air, Equipment: documentation/manual, type plate available, Thanks to the enclosed construction cartridge system, this 3D printer is ideally suited for prototype construction, the dental field, or even for training purposes, as there is no contact with the metal powder – neither during the component preparation nor during the printing process itself. AL3D-METAL 200-100 3D metal printer for additive manufacturing Fjdpozlnh Rjfx Aatopl LASER TYPE: Fiber laser Wavelength: 1070 nm Average power: 200 W Operating mode: CW Focus diameter: 50 μm Scanning speed: max. 5 m/s Process parameters: Option to comprehensively influence the process parameters INCLUDES 9 CONSTRUCTION CARTRIDGES: Build volume: r Ø 100 mm; z 60 mm Layer thickness: 10 - 50 μm Achievable component density: > 99 % SOFTWARE AL3D-OS Operation: via 15.6" touchscreen, keyboard, and mouse Connectivity: 1x Ethernet; 2x USB CAD import file format: STL Print preparation: Simple support generation. Slicer integrated into the software.

Year of construction: 2019, operating hours: 380 h, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm • Operating mode: Pulsed Fpjdpfx Aaezf A Ifetol • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms • Pulse frequency: Single pulse up to 100 Hz • Welding spot diameter: 0.2–2.0 mm • Focusing objective: 150 mm (further lenses per lens data sheet) • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm • Lowest working point: 530 mm • Highest working point: 1590 mm • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, product height (max.): 100 mm, space requirement height: 1,750 mm, space requirement length: 1,200 mm, input frequency: 50 Hz, workpiece weight (max.): 300 kg, Equipment: type plate available, Alpha Brush KS-WBM Sanding Machine, Texture Brushing Machine This machine gives surfaces, such as profile boards for facades or wall cladding, a noticeably more sophisticated and rustic look! With up to 400 mm working width and customizable configuration for both softwoods and hardwoods, this machine is a versatile tool for carpentry workshops, planing mills, or joineries. Fsdpfx Aaew Avrhstepl We offer not only the texture brushing machine itself, but also the appropriate extraction unit and a variety of brush heads to equip the machine, allowing you to achieve your desired effect on wooden surfaces. In addition to this sanding automaton, we also supply coating machines that allow you to stain or finish boards and panels in one step. Do you have questions? We are happy to advise you individually on your requirements.

Condition: ready for operation (used), Alpha SPG 75-MF1-7 gearbox SN: 203771 - 6000 rpm, used, in good condition, fully functional, delivery scope as per photos. Fpedsy Nn Hkjpfx Aatol

Condition: ready for operation (used), Alpha SPG 060-MF1-7-00/060S02 gearbox 20009454, serial number: 1159634, used, in good overall condition, 100% functional, scope of delivery as per photos. Fodpfxjx Dtxfs Aatjpl

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20044G, total length: 5,000 mm, total height: 2,100 mm, total width: 1,500 mm, input voltage: 220 V, power: 4 kW (5.44 HP), For sale is a used sleeve labeling machine, including a shrink tunnel and conveyor belt, taken from an industrial packaging line. The system was used for the automatic application of shrink sleeve labels to bottles, cans, and other containers and is particularly suitable for applications in the beverage, food, and packaging industries. The machine features a robust, industrial-grade design with a stainless steel housing and can be integrated into existing packaging and filling lines. Condition: The system is used and has been partially refurbished. It was last in working order. However, due to its used condition, the sale is made without any warranty regarding completeness, current control function, or suitability for a specific application. An inspection and technical assessment before purchase are recommended. Fpodpfxexvbz Ee Aatol Scope of delivery: Sleeve labeling machine Shrink tunnel Conveyor belt Existing attachments and components as per inspection Individual sale possible: If interested, individual machine components or assemblies can also be purchased separately. Inspection possible by appointment. Further technical information, images, and dimensions are available upon request.

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Fpedpfex Ectuox Aatjl

Year of construction: 2021, condition: ready for operation (used), Weighing heads: 10, max. weighing capacity: 6500g, individual weighing capacity: 10g-800g, scale volume: 1600ml, max. capacity: 70/min, number of programs: 100, dimensions X/Y/Z: approx. 1100mm/1100mm/1350mm, weight: approx. 330kg. The multihead weigher is sold as a complete system including accessories, peripherals and spare parts. Documentation available. Fpedpfx Aaet Rkaaotel

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, A used horizontal form, fill, and seal machine (HFFS) from the DEAPHS series is for sale. It is designed for the automatic production, filling, and sealing of pouches made from flat film. ### Current Machine Condition The machine is currently set up for the production of 4-side seal pouches. The machine forms the pouch directly from flat film, takes over the filling process – in conjunction with a suitable dosing system – and then automatically seals the pouch. The DEAPHS series is fundamentally modular in design and can be adapted for other pouch types and applications, depending on the existing or additional equipment, for example: - 3-side seal pouches / sachets - 4-side seal pouches - Doypack / stand-up pouches Adaptation to other pouch types depends on the format, product, and required machine components and is not part of the current setup. ### Possible Applications Depending on the dosing system used, the machine is suitable for packaging, for example: - Powdered products - Granules and granular products - Food products - Animal feed - Cosmetic products - Technical and other non-food products - Single-serve packs, sample sizes, and samples Different dosing and feeding systems can be used for different products. ### Machine Equipment - Independent film unwinding shaft - Pouch bottom sealing - Pouch bottom former - 3 horizontal sealing units - 2 vertical sealing units - Servo-controlled film/pouch feed - Mechanical pouch cut - Vacuum pouch opening Fodpfoum R Ezjx Aatepl - Photoelectric sensor control for printed film - LCD touchscreen display - Panasonic PLC - Servo film drive The separate film unwinding system enables controlled film tension and adjustment to different film widths and pouch formats. ### Possible Dosing Systems Depending on the application, the machine can be combined with the following dosing systems, among others: - Auger dosing - Volumetric cup filler - Multi-head combination weigher - Piston filler - Pump filler / liquid dosing, e.g., Hibar Availability and scope of delivery of the respective dosing systems can be requested separately. ### Technical Data Machine dimensions: approx. 5,500 × 1,100 × 1,400 mm (L × W × H) Net weight: approx. 2,000 kg Power supply: 380 V / 3 phases / 50 Hz Connected load: approx. 6.5 kW Air consumption: approx. 0.23 m³/min ### Installed Components / Manufacturers Components from, among others: Mitsubishi, Panasonic, Autonics, ABB, Airtac, and SMC Suitable packaging films, as well as other dosing, feeding, and peripheral equipment, can also be offered depending on the application. Inspection of the machine is possible by appointment. Further information on pouch formats, working widths, possible dosing systems, and scope of delivery can be provided upon request.

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Fedpfsdzqptex Aatepl Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: like new (used), functionality: fully functional, SHOWROOM Machine Horizontal filling and sealing machine APHPM-250G Technical information: Max. bag width: 100-250 mm* Max. bag length: 150-400 mm* Fpsdet H E D Sjpfx Aatol Speed: 8-12 pieces/min Usable bag types: Flat bags, stand-up pouches, zipper bags Bottom depth: 40-140 mm* With our horizontal filling and sealing machines for pre-made bags, you are guaranteed to make the right choice! This machine series impresses with its ease of operation and a simple, compact design. Our packaging machines seal pre-made bags with high strength, ensuring that your products are safely packaged for transport and retail. Thanks to our innovative technology, high productivity of the filling and sealing machines is ensured. Our APHPM machines fill and seal up to 60 bags per minute and can be used in almost any industry (e.g., food, medical, cosmetics, and fine chemicals). Thus, our innovative machines represent a significant improvement in your packaging process.

Condition: new, Year of construction: 2025, functionality: fully functional, laser wavelength: 1,064 nm, AL-IN 300 W, laser welding machine, demonstration unit, like new, 1-year warranty, mounted on the original pallet, partially still packaged. Additional demo units available on request. Sales only within the EU. - X, Y, Z axes powered, operable via joystick and semi-automatic mode - User coordinate system (UCS) – automatic Z-axis guidance for welding on inclined planes Accessories: Tilting/swiveling optics Ergonomic wedge for optimal working position Multi-function foot switch Fsdpfopcf Ntex Aatspl Angled base with table plate for ALT-base C Beam deflection unit, swiveling 110° L/R, including 12V External cooling (unregulated) Laser welding consumables, Lawitex starter kit. As a laser welding wire manufacturer, we can create a custom wire selection for your specific requirements. Welding parameters will be personally explained, saved, and made easily retrievable for you. We supply genuine Alpha Laser spare parts and offer application/product training as well as service at attractive conditions. We are the official sales partner for Alpha Laser laser welding systems. With almost 30 years of experience in welding technology, we offer advanced laser welding technology from a single source. Inquiries, explanations, welding training, and instruction (also by phone) are available in German, English, and Polish. Supplier Lawitex GmbH 40764 Langenfeld (Rheinland), Germany

Condition: good (used), Year of construction: 2009, Professional horizontal packaging machine from a renowned manufacturer. Suitable, for example, for packaging food, confectionery, medical products, technical items, printed and paper products, household and toys, and textiles. Packing width: 35 - 100 mm Packing length: 65 - 160 mm Pack height: 5 - 35 mm Output: 35 - 200 packs per minute film width: 80 - 220 mm Fjdopm Hcbopfx Aatjpl Machine weight: 450 kg Machine dimensions: Length 4,0 x width 0,9 x height 1,6 m 220V / 50 -60 Hz / 2,7 KW

Condition: used, functionality: unexamined, Ferwood Code: RU0011686 - Manufacturer Code: SP075-MF1-10-121-000 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service; please contact us. 3KG 20X20X20 Fjdpsymd Ikefx Aatopl

Condition: used, functionality: unexamined, Ferwood Code: RU0011864 - Manufacturer Code: SP075S-MF1-10-1C1-2S - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service. Please contact us. 3.5KG 20X20X20 Fpjdsymd Aujpfx Aatjl

Condition: used, functionality: unexamined, Ferwood Code: RU0011867 - Manufacturer Code: SP075-MF2-20-121-000 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 4KG 36X26X21 Fedpfx Asymd Ecjatepl

Condition: ready for operation (used), A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Fpjdpfx Aoxrukljatol

Condition: used, functionality: unexamined, Ferwood Code: RU0011869 - Manufacturer Code: SP075S-MF2-20-1C1-2S - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 4KG 36X26X21 Fedpfxsymd Iwe Aatepl

Condition: new, Year of construction: 2026, operating hours: 200 h, functionality: fully functional, SHOWROOM machine, the advertised machine was never delivered and was only run for test purposes. Rotating doypack wrapping machine DEAP-8BT: The 8-station rotating horizontal filling and sealing machine fills and seals doypack stand-up and seals Doypack stand-up pouches with cycle times of up to 50 pieces per minute. minute. The compact design of the rotary machine is very space-saving and flexibly adjustable to different bag widths. The rotary-type machines in the AP series are the cost-effective alternative to complex linear filling machines without time-consuming set-up times. The stand-up pouches are transported via a transported via a bag magazine and filled and sealed in 8 rotating workstations. sealed. Applicable products: The DEAP-8BT series reliably packs - Pet food - Cosmetics (shower gel, soap) - Food (e.g. muesli or dried fruit) dried fruit) - small parts Machine information: - Quick format change of the bags - Additional modules can be integrated (gas flushing, Fpodpetuwf Eefx Aatel weighing systems, double sealing) - Touch panel control, with storable programs programs - Central gripper adjustment - Customized special design - for special widths or special feeding systems - up to 50 pieces/min (depending on bag size) Other information: - Safety standards: CE conformity, DIN standards - Noise level: Below 80 decibels according to DIN 45635 - Applicable bag types: Pre-made stand-up pouches, flat pouches, spout pouches, pressure seal pouches, slider pouches, gusseted bags, single-lip (depending on optional components - Film types: OPP/CPP, OPP/CE, PET, PE, laminated films, composite films - Product types: piece goods (screws, nuts, etc.), bulk goods (flour, nuts, etc.), liquids (sauces, paints, etc.) This advertisement refers to the packaging machine and not the multihead weigher.

Condition: refurbished (used), Available rubber testing equipment 1 x Alpha Production MDR Rheometer (optionally in container with pneumatic sample punch) Fpsdjwmnlhspfx Aatel The device has been inspected, calibrated, and equipped with new software on a new tower PC!

Condition: used, functionality: unexamined, Ferwood Code: RU0005404 - Manufacturer Code: SP 100-MF1-10 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Fjdpev Eflwjfx Aatopl

Condition: ready for operation (used), An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Fjdpfjxrukrex Aatopl