Used Amada Lc 1212 for sale (199)

Condition: ready for operation (used), Year of construction: 2006, laser power: 4,500 W, travel distance X-axis: 3,420 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis AMADA FOL 3015 NT was manufactured in 2006. It features an impressive X-axis travel of 3420 mm, Y-axis travel of 1550 mm, and Z-axis travel of 200 mm. The machine is equipped with a powerful 4500 W laser source and includes a side pallet loading system, FANUC AF4500E CNC control, and an industrial extraction system. If you are looking to get high-quality laser cutting capabilities, consider the AMADA FOL 3015 NT machine we have for sale. Contact us for further details. • Laser source: FANUC AF-4500E • CNC control: FANUC AF4500E Bodpfx Akez Ix R Sstolp Additional equipment • Side pallet loading system • HYFRA PEDIA SVK 540 cooling unit (chiller) • DONALDSON TORIT DCE DF8 industrial extraction system (fume extractor)

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Bljdpfsy Sbu Hjx Aktep Discharge conveyor + lift system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. The machine is in very good condition and has only been used for thin sheet material. All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Weight: 6150 kg

Condition: excellent (used), Year of construction: 1998, Model Amada APX 8025 8 Axis CNC Hydraulic down stroking Press Brake with Operateur II 7 axis CNC control Erwin sick machine mounted light screen guarding system year 1998 stock no. 01834 specification 80 TONS CAPACITY X 2500 7 AXIS CNC CONTROL HYDRAULIC UPSTROKING PRESS BRAKE description TYPE HYDRAULIC UPSTROKING CONTROL OPERATEUR 2 BENDING PRESSURE 80 TONS BENDING LENGTH 2500 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 7 AXIS CONFIGURATIONS 1-X YI-Y2 RI-R2 Z1-Z2 GUARDS ELECTRONIC SIDE FENCING REAR INTERLOCKED MACHINE HEIGHT 2300 MOTOR POWER 7.5 KW Bjdpfjwybcyjx Aktjlp

Condition: excellent (used), Year of construction: 2004, AMADA MODEL HFE 103-3 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 100-3 downstroke CNC Press brake Year 2004 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Bsdsyt H Awopfx Aktjlp Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 6800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, sheet width 3100 mm plate thickness 6 mm stroke 160 mm rear stop 1000 mm total power requirement 5,5 kW Bjdpfx Ao Aa A Hhoktolp machine weight ab. 6.500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: CNC control, bending force (max.): 130 t, working width: 3,100 mm, number of axes: 6, Equipment: CE marking, european tool clamping system, lower tooling, safety light barrier, upper tooling, Used Amada HFE 3metre x 130ton cnc pressbrake for sale TYPE HYDRAULIC DOWNSTROKING CAPACITY 130 TONS CONTROLLED AXIS Y1, Y2, X, R1 R2 Z1 Z2 MAX BEND LENGTH 3000 MM OPEN HEIGHT 470 YEAR 2001 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR POWER 11 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING Blsdpfxjw Ugg Es Aktep REAR INTERLOCKED FENCING TONNAGE 1300 KN APPROACH SPEED 100 MM/SEC BENDING SPEED 1 – 10 MM/SEC RETURN SPEED 1-100 MM/SEC OIL CAPACITY 110 LITRES WEIGHT 7800 KG BACK GUAGE STROKE (X AXIS) 700 MM/S MAX GUAGE 1000MM

Condition: excellent (used), Year of construction: 1991, AMADA MODEL HFBE 170-3 Bodpfx Aewcd Spsktolp 170 tons x 3000 complete with DELEM DA 58 MULTI AXIS CNC CONTROL ERWIN SICK MACHINE MOUNTER ELECTRONIC GUARDING SUYSTEM SIDE AND REAR INTERLOCKED FENCING Bending force: 170 T Bending length: 3100 mm Distance between uprights: 2650 mm Cnc control: DELEM DA 58 Throat: 410 mm Vertical stroke: 180 mm Working speed: 10 mm/s Axis number: 6 Including Z axis Motor Power: 13 kW Machine weight: 10500 kg Machine dimensions (LxWxH): 3200 x 1700 x 2500 mm

Condition: used, control type: CNC control, degree of automation: automatic, bending force (max.): 170 t, stroke length: 30 mm, overall weight: 10,500 kg, AMADA Promecam HFB Press Brake — 1700 kN / 3000 mm For sale: Heavy-duty hydraulic press brake for industrial use, in very good working condition. Machine details: Manufacturer: Amada Promecam (France) Model: HFB Year of manufacture: 1991 Technical specifications: Press force: 1700 kN (170 tons) Maximum stroke: 130 mm Input voltage: 380 V / 50 Hz, 3-phase Installed power: 13 kW Nominal current: 27 A Weight: 10,500 kg Control system: Bsdpfx Ajywr R Aoktelp Delem DA 58 graphical CNC controller Additional information: The machine is equipped with a full air bending capacity chart mounted directly on the machine body. Tooling included. This press brake has been in regular production use and is in full working order. For further information and inquiries, please contact us by email or phone. Available for collection by arrangement.

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. Blsdeyz Scgepfx Aktsp The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Technical Machine Benefits • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Dimensions Machine Depth 6400 mm

Condition: excellent (used), Amada Togu Surface Grinder Tool diameter (min.) Ø 2 Tool diameter (max.) Ø 160 Vertical traverse (mm) 200 Grinding speed: Blodpfoz R A T Dox Aktep Stations A / B / C (mm/min) 0.06 Stations D / E (mm/min) 0.03 Dimensions: Length (mm) 750 Width (mm) 800 Height (mm) 1920 Weight (kg) 470

Condition: excellent (used), Technical data: Year of manufacture: 1994, retrofitted in 2026 Working length: 4100 mm Distance between uprights: 3650 mm Press force: 170 tons CNC control: OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools Bedpfx Akjz Immzetjlp The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Bledpfx Asza E S Dektsp

Condition: excellent (used), Year of construction: 2001, Used High Quality, Very Clean and Fully Serviced Large Format Amada Vipros King 368 Cnc Punch Press For Sale Complete With 1600 Throat To Process 3metre x 1.5metre Sheet Metal year 2001 price POA specification 30 TONS CAPACITY 58 STATION 4 AUTO-INDEX HYDRAULIC CNC PUNCH PRESS COMPLETE WITH LKI MP3000 LOAD -UNLOAD MANILPULATOR description CAPACITY 30 TONS TYPE BRIDGE FRAME SERVO CONTROLLED HYDRAULIC RAM BRIDGE FRAME SERVO CONTROLLED HYDRAULIC RAM CONTROL FANUC 18P MAX AXIS TRAVEL 1525 X 2000 MAX SHEET SIZE 1525 X 4000 MAX SHEET THICKNESS 3.2MM 58 STATIONS THICK (H) 24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 1 x 88.9 mm AUTO-INDEX STATIONS 2 X 31.7mm 2 X 114.9mm MAX SHEET WEIGHT 150 KG 120 KG AT MAX SPEED MAX HIT RATE 860 STROKES PER/MIN POWER AND AIR REQUIRED 30 KVA 400V +/- 10%50 Hz AIR 5.0 kgf/cm/2 AIR FLOW 250 L/MIN COOLING WATER FLOW Min 40 1/min WEIGHT 14000kg SERIAL NO. MAX SHEET SIZE 3000mm X 1500mm MIN SHEET SIZE 1000 MM X 300mm SHEET THICKNESS RANGE 0.5mm – 6.0mm MAX LIFT CAPACITY 170 KG WITH DOUBLE SHEET DETECTION MAX PALLET LOAD 3000KG POWERAND AIR REQUIRED 10 KVE AIR 6 BAR FLOW RATE 650L/MIN Bljdpfx Ajr D R Ruektep

Condition: good (used), Year of construction: 2008, Used 6-meter CNC press brake by Amada Type: HFE 400 6 L Capacity: 6100 x 400 tons Stroke: 350 mm Bsdpsy T Hltefx Aktslp Y1, Y2, X1, X2, R1, R2, Z1, and Z2 CNC controlled 9204 operating hours Weight: 36 tons Transport in 2 parts (main frame + separate lower table) Self-adjusting crowning system in the lower table 450 mm mounted on the floor foundation Dismantling and loading included

Condition: used, cutting diameter / mm saw band length 8800 mm cutting width / mm total power requirement / kW weight of the machine ca. / t required space / m Bljdpfx Akjzcgkmjtsp

Condition: excellent (used), Year of construction: 2007, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Bljdpfx Akjywd Ndjtsp Max. cutting capacity for stainless steel: 6.0 mm Max. cutting capacity for aluminium: 8.0 mm Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2011, punching force: 31 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, controller manufacturer: FANUC, number of axes: 2, This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Working area with repositioning: 5000 x 1525 mm • Max. sheet thickness: 4,5 mm (mild steel) • Feed rate X/Y: 100 / 80 m/min (128 m/min simultaneous) • Positioning tolerance: +/- 0,1 mm • Z-turret stations: 45 • AutoIndex stations: 4 (2 x B, 2 x C) • Turret feed rate: 30 1/min • Max. number of hits: 1000/min • Machine frame: Bridge frame • Punching drive: Servo-electric Twin Drive • Drives (turret + table): AC-Servo motors • Clamps: Pneumatical • Electrical connection: 400V / 50Hz • Electrical consumption: 1 kW – 7 kW • Air consumption (machine): 250 l/min • Air consumption (Air Jet Vakuum): 250 l/min Additional equipment Bledpfsx D Hpqex Aktop • Loading unit: Loader L III 300 • Sheet size min.: 1000 x 300 mm • Sheet size max.: 3000 x 1500 mm • Material thickness: 0,5 – 8,0 mm • Max. loading weight: 300 kg • Max. stack height: 300 mm • Max. pallet weight: 4000 kg (2x2000 kg) • Max. feed rate (traverse): 70 m/min • Number of suction cups: 34 pieces • Double sheet control: Yes, with sheet thickness detector • Air consumption: 510 l/min, 6 bar inlet pressure • Electrical connection: 400V • Unloading unit with Parts Remover: PR 3 UL 300 P • Part size min./max.: 150 x 150 mm / 2500 x 1000 mm • Sheet thickness: 0,5 – 3,0 mm (4 mm for EM-Serie) • Max. part weight: 50 kg • Storage table size: 3400 x 1400 mm • Max. part size for unloading clamps: 3000 x 1500 mm • Max. stack height skeleton table: 450 mm • Max. weight skeleton table: 2000 kg • Max. stack height storage table: 450 mm • Max. weight storage table: 4000 kg • Max. feed rate X-/Y-direction: 180 / 90 m/min • Air consumption: 1000 l/min, 6 bar inlet pressure • Electrical connection: 400V

Condition: used, Year of construction: 1991, cutting diameter 420 mm saw band length 4570 x 41 x1,3 mm table height 800 mm cutting width 400 mm Bljdpfx Asz Ek Dfsktop capacity 90 degrees: round 420 mm capacity 90 degrees: flat 300 x 200 mm capacity 90 degrees: square 300 x 200 mm cutting speed 15 - 90 m/min total power requirement 7,0 kW weight of the machine ca. 2200 kg Standard Accessories for the HFA Series - Chip conveyor - Feed pressure regulator - Cut length adjustment - Multiple feed - Piece counter - Powered chip brush - Hydraulic belt tensioning - Stepless belt speed control - Jog button - Cutting and guide plates - Automatic zero stop - Cutting accuracy monitoring - NC cut length programming - Error reporting system

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Blsdpfx Ajxv A E Sjktjp

Condition: good (used), functionality: fully functional, overall weight: 7,500 kg, total length: 4,000 mm, total width: 2,000 mm, total height: 2,800 mm, FOR SALE: Amada HFB 125/30 Press Brake Available for purchase: a true industry workhorse, the Amada HFB 125/30. Known for its exceptional precision and reliability, this machine has been well-maintained and is ready for demanding production environments. Technical Specifications: Press Capacity: 125 tons Bending Length: 3000 mm Year of Manufacture: approx. 2001 Controller: Operateur CNC (multi-axis control) Stroke Length: 200 mm Open Height: 450 mm Key Features: Precise and efficient down-stroking operation. Versatile multi-axis backgauge for complex setups. Rigid frame design ensuring consistent angles across the full length. Bsdpfx Akjy Athyotolp Well-maintained and in full working order.

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, working width: 3,100 mm, pressing force: 170 t, working range: 3,100 mm, AMADA MULTI AXIS CNC 170 TONS X 3100 HYDRAULIC DOWNSTROKING PRESS BRAKE WITH AMADA OPERATEUR II 8 AXIS CNC CONTROL Description TYPE HYDRAULIC DOWNSTROKING CAPACITY 170 TONS CONTROL AMADA OPERATEUR II NO OF AXIS 8 INCLUDING Z1 AND Z 2 BENDING LENGTH 3100mm OPEN HEIGHT 450 Bljdpfjv Iftgox Aktjp STROKE LENGTH 180 THROAT DEPTH 410 MOTOR SIZE 15 KW FRONT GUARDING ERWIN SICK MACHINE MOUNTED ELECTRONIC GUARDS SIDE FENCING REAR INTERLOCKED WEIGHT 11 TONS

Condition: good (used), Year of construction: 1987, operating hours: 42,846 h, machine/vehicle number: P2440355, CNC turret punch press with 24 stations Control: FANUC 6M Operating hours: 42,846 h Spindle motor: 5.5 kW Capacity: 20 tons Blsdpsxqr Sqjfx Aktjp Number of stations: 24 Material thickness: 6.35 mm Hole size: 88.9 mm Sheet size WITHOUT REPOSITIONING: 1000 x 1000 mm WITH 1 REPOSITION: 2000 x 1000 mm Max. sheet weight: 50 kg Speed: 30 rpm Stroke rate: 200 strokes per minute Net weight: 8,500 kg Dimensions (L x W x H): 4,500 x 3,200 x 2,200 mm

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work Bledpfx Aksn Smg Tstsp New c and h frame presses also available.

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION Blodpfoyk D Dtjx Aktop MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Year of construction: 2003, condition: excellent (used), Amada GS 630 sheet metal hydraulic cutting machine for sale G Series Hydraulic Shear – Video at the bottom of this listing Specification: Model: 630 Max Plate Thickness mild steel (mm): 6.35 Bljdpfx Asimwcqsktsp Max Plate Thickness stainless steel (mm) 4 Max Cut Length (mm) 3050 Max Stroke / min 35 Motor Size (Kw) 5.5 Machine Weight (Kg) 6150 Back gauge speed (mm/s) 100 Back gauge Range (mm) 10-1000