Used Illig Kfg 37 for sale (22)

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Dcjdpfeq A Um Rjx Ai Ssn Control cabinet: included

Condition: excellent (used), Year of construction: 2017, operating hours: 748 h, functionality: fully functional, machine/vehicle number: 5231847, type of input current: three-phase, total width: 3,988 mm, total length: 4,740 mm, total height: 3,440 mm, input voltage: 400 V, compressed air connection: 6 bar, overall weight: 2,700 kg, Sheet thermoforming machine Machine for processing semi-finished products Maximum sheet size: 1,000 x 700 mm Minimum sheet size: 300 x 210 mm Maximum sheet thickness: 12 mm Minimum sheet thickness: 0.5 mm The machine is fully equipped and prepared for automatic feeding. Features upper and lower tool function, water-cooled molds. Intelligent control via pre-saved material parameters. Dcsdjznbp Tjpfx Ai Ssn The price includes a GEISS horizontal bandsaw HBS 1000.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 1,60,857 h, functionality: fully functional, machine/vehicle number: 396, type of input current: AC, input voltage: 400 V, compressed air connection: 8 bar, sheet thickness aluminum (max.): 80 mm, pressure: 16 bar, film width: 560 mm, roll diameter: 1,200 mm, overall weight: 3,000 kg, input current: 48 A, heating capacity: 19.4 kW (26.38 HP), Equipment: cooling unit, documentation/manual, ILLIG RV 53 Thermoforming Machine + a cooling unit – PS, PVC, PET & Other Thermoplastics Dsdpoz Hi Iljfx Ai Sscn The machine is suitable for the production of thermoformed products from PS, PVC, PET and other thermoplastic materials. The machine has been regularly maintained and well cared for throughout its operating life. It has only been used for approximately a few hours per day on average, resulting in relatively low operating hours for a production machine of this type. The machine is still in operation, allowing prospective buyers to inspect it under working conditions. A live demonstration is available by prior appointment. This is a good opportunity to acquire a well-maintained ILLIG RV 53 thermoforming machine with the advantage of being able to inspect and test the machine in actual production before purchase. Further technical specifications, photographs and additional information are available upon request.

Year of construction: 1987, condition: used, Year of manufacture: 1987 Three stations (forming, cutting – with a movable upper table, stacking) for the production of packaging from PVC, PS, PET, and PLA films. Equipped with lower and upper heaters. MAX. forming area: 500x350 mm Max. forming height/depth: 40/100 mm Max. film width: 550 mm Film thickness: 0.2-0.6 mm Installed power: 23 kW Vacuum pump capacity: 40 m³/h The machine underwent a major overhaul in 2021, is fully functional, and can be seen in operation near Warsaw. Djdpfx Aiozu Nvue Secn Price: 35,000 EUR

Year of construction: 1986, condition: used, Year of manufacture: 1986 Three stations (forming, cutting – with a movable upper table, stacking) for the production of packaging from PVC, PS, PET, and PLA films. Equipped with upper heating elements. MAX. forming area: 500x350 mm Max. forming height/depth: 40/100 mm Max. film width: 550 mm Film thickness: 0.2-0.6 mm Installed power: 23 kW Dodpfozu Nw Eex Ai Socn Vacuum pump capacity: 40 m³/h The machine underwent a major overhaul in 2021 and is fully functional. It can be seen in operation near Warsaw. Price: 35,000 EUR

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Dcsdpozx Ergefx Ai Ssn Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister machine, manufactured in 1991. This is a high-performance, continuous-flow blister sealing machine with card feeder, suitable for film thicknesses of 150 µm to 400 µm (possibly higher, but not personally tested). The entire line is offered for sale (see pictures). Speed: 1–9 cycles/min with 4-up tooling. Example: fragrance dispenser, 4 units per blister tray = 2000 blisters/hour. Dimensions: approximately 9m x 1m x 2.25m. Sealing platen size: 57x32cm. The machine was 100% functional until it was dismantled and properly stored in our machine warehouse and was in operation until recently. Inspection of the dismantled system is possible on-site. An identical machine is still in operation on-site. A sample packaging can be installed for a test run to demonstrate the functionality. Location: Czech Republic (10 minutes past the Bavarian/Czech border from Furth im Wald). Dcodpsy Anifefx Ai Ssn

Year of construction: 1996, condition: used, Year of manufacture: 1996 Thermoforming, die-cutting for production from PET, PVC, PS, PLA films, etc. Working area: 500 x 740 mm Forming height: 150 mm Maximum film width: 540 mm Dcodpszu Nx Njfx Ai Sjn Film thickness: up to 1.5 mm Installed power: 13 kW Busch pump New control system. The machine was overhauled in 2020 and is fully operational; it can be viewed in operation near Warsaw. Price: 23,000 EUR

Year of construction: 2010, condition: excellent (used), functionality: fully functional, COMPLETE AMUT SHEET EXTRUSION AND ILLIG THERMOFORMING LINE AMUT sheet extrusion line: Maximum operating speed: 30 m/min Main extruder (layer A): EA100 / 35D Right co-extruder (layer B): EA600 / 33D Materials processed: PP, PS, or HIPS Hourly production: up to 450 kg/h Maximum usable width: 720 mm Sheet thickness: min/max 0.15 / 1.8 mm Amut sheet extrusion die Calender with a width of 1000 mm Diameter of heating rollers: 600 mm ILLIG thermoforming machine Model: RDKP Maximum sheet width: 805 mm Dedezgtf Dspfx Ai Secn Maximum roll diameter: 1600 mm Various molds included 4 complete lines available Year: 2010

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight. Dedpfx Aijq Nn Hco Sjcn

Year of construction: 2011, operating hours: 29,420 h, condition: excellent (used), functionality: fully functional, Make Illig Model RDK 80 Year 2011 Approx Hours 29420 Stations Forming, Hole Punching, Robot, Cutting and Stacking Delivery date Immediately Max forming area 756 x 565 mm Max Sheet Width 805 mm Depth of draw 120 / 120 mm Steel Rule Punching Force 600 kN Max cycles-minute 55 Forming pressure 6 bar Dedszam Hcjpfx Ai Secn All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 1982, condition: ready for operation (used), A vacuum thermoforming machine Adolf Illig with a Busch vacuum pump is available. Form dimensions X/Y: 500mm/350mm, max. forming depth positive/negative: 100mm/100mm, max. mold height: 100mm, vacuum pump: Busch R5. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Dodpfx Aezqu Eyoi Sscn

Condition: ready for operation (used), Year of construction: 2004, An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible. Dedpfx Ajyyplcei Sscn

Condition: ready for operation (used), Year of construction: 2005, Offered is an ILLIG HSA 30 RD - high-performance continuous sealing machine for blister packaging: blister films: PVC, PET APET/PETG, PS, film thickness: 150µm-600µm, lid materials: heat-sealable cardboard, aluminum composite films, Tyvek, sealing area X/Y max. approx. 500mm/300mm, forming depth max. approx. 100mm, 8-18 cycles/minute. Inspection possible by arrangement. Expected to be available June 2026. Dodpfx Aisylbrko Sjcn

Condition: excellent (used), Make Illig Model RV 53d Year 2012 Condition Excellent Stock Number 00047 Approx Hours 16.700 Dodpfx Aoz Ecu Nji Socn Delivery Date November 2026 Stations Forming, Cutting and Robot Stacking Max Forming Area 500 x 365 mm Min Forming Area 300 x 160 mm Depth of Draw 100 / 40 mm Max Mould Closing Force 400 kN Forming Pressure 3 bar Max Cycles/Min 45 Total Width incl Control Cabinet 2600 mm Total Length incl Roll Stand 6750 mm Total Height 2590 mm Total Weight 6500 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: used, Year of construction: 1990, The Adolf Illig SB 53C - DIN is a used skin and blister packaging machine (universal vacuum thermoforming machine). It was developed for the economical production of transparent blister packaging and for the direct skin packaging of products onto cardboard backing cards. The used skin and blister packaging machine was installed at a university and used exclusively for teaching purposes. Manufacturer: Adolf Illig Dcedoxm Sa Hjpfx Ai Ssn Type: SB 53C - DIN Year built: 1990 Technical doc.: Yes Condition: Second hand Price: By request Power consumption & electrical system: Heating capacity: 4.5 kW (provided by 15 ceramic surface heaters for uniform heating) Drive motor power: 1.24 kW Vacuum system: Maximum vacuum level of 0.95 kp/cm² (frequently operated with Busch vacuum pumps) Air consumption: Approx. 30 litres per working cycle. Film roll holders: Film roll diameter for Blister packaging: Max. 400 mm Film roll diameter for Skin packaging: Max. 350 mm Film roll core diameter: 70 mm. Format ranges & capacities: Maximum forming area: 405 × 500 mm Packaging / cardboard size: 400 × 495 mm Maximum draw depth: 100 to 150 mm (both positive and negative forming possible) Maximum packaging height: 150 mm Film width: 445 mm. Dimensions and weight: Machine dimensions: Approx. length 1.600 mm × width 1.135 mm × height 2.710 mm Empty weight: Approx. 500 kg.

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it Dcodpfx Aiot Iracs Son

Year of construction: 2006, condition: good (used), Illig SK 74-C from a workshop for the disabled Year of construction 2006 serial no.426-0172 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600 Dcjdpfx Aior Nv E Ns Son

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1126, film width: 540 mm, type of input current: three-phase, total width: 1,710 mm, total length: 3,070 mm, total height: 2,520 mm, overall weight: 838 kg, power: 1.9 kW (2.58 HP), Equipment: type plate available, Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c -Foil width: 540 mm -Roller conveyors: each 1000 x 560 mm maximum -Work table: dimensions see photos -total Motor output: 1.9 kW -total Heating power: 8.9 kW Dedpoft Sccjfx Ai Socn -Dimension: 3070/1710/H2520 mm 838 kg -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg + 500 kg foil

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 589-0263, Make Illig Model VHW 60/2 Year 2001 Condition Good Number of Heating Rolls Two Max material width 610 mm Max material thickness 1.8 mm Max temperature of heating rolls 140 °C Material wrap around 563 Grad Total connected load 36.0 kW Dimensions 2300 x 1400 x 2400mm L x W x H (300kg) Dcedpfouzi I Eex Ai Ssn All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C The machine is incomplete and not operational! For spare parts only!! Dedpfxeuk Dwfo Ai Sscn

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection. Dedpfx Aistv Ivzs Sscn