Used Arboga Ufb 3508 for sale (11)

Condition: good (used), 1 x geared drilling and milling machine Arboga UFB 3008 Nice machine from a small toolmaking shop. Speeds: 100 - 3200 rpm in 8 steps / 2 via motor Spindle mount: MT 3 Table: 240 x 580 mm Redpfjx Rpxdex Aamon Accessories: 1 x drill chuck 1 - 16 mm 1 x tapping chuck 4 x MT 3 drills 1 x machine vice 1 x dividing head with 3-jaw chuck The machine can be inspected under power

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm Rsdjyf Ehiepfx Aamon - Weight approx. 270 kg - Machine vice

Condition: used, bore capacity in steel (diameter) 25 mm throat 220 mm bore stroke 110 mm taper MK 3 MK table-size 350 rund mm turning speeds 100 - 2080 U/min connected load frequency 400 V total power requirement 0,9 KW weight of the machine ca. 0,2 t dimensions 0,8 x 0,6 x 1,9 m Rsdpfx Aeyfwy Roamjn

Condition: used, Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm Rsdpfx Ajdyb Htjamon -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg

Condition: good (used), Year of construction: 1996, machine/vehicle number: 337794, Offer 25367 Technical data: - Drilling capacity: 25 mm - Tapping capacity: M16 - Drill spindle mount with clamping nut: MT3 - Drill spindle speeds: 100 / 205 / 330 / 420 rpm, 665 / 850 / 1375 / 2775 rpm - Drill unit height adjustable via hand crank Rjdpfsx Tq Irex Aamsn - Minimum / maximum table-to-drill/milling spindle distance: 60 / 390 mm - Drill spindle stroke: 130 mm - Fine spindle feed adjustment via handwheel - Drill spindle reach: 260 mm - Drill/milling head tiltable left & right by 45° each - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel: X-axis 415 mm, Y-axis 155 mm - Machine vice included - Drive: 400 V / 0.65 / 0.9 kW - Required space (approx.): W 900 x H 1800 x D 700 mm - Weight (approx.): 270 kg

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 25 mm throat 270 mm bore stroke 130 mm taper MK 3 MK Rsdpfx Aexz Hgwjamsn table-size 500 x 350 mm turning speeds 100 - 2750 U/min connected load frequency 400 V total power requirement 1,1 KW weight of the machine ca. 0,22 t dimensions 0,8 x 0,6 x 1,8 m

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Technical Data: - Drilling capacity: 25 mm - Spindle taper: MT 3 - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm - Spindle stroke: 130 mm - Spindle overhang: 260 mm - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg - Machine vice Rsdpfsxu U Sujx Aamen

Year of construction: 1970, condition: used, machine/vehicle number: 12901, drilling capacity steel/GG: 50/60 mm spindle taper: 5 MK arm length: 400 mm table size: 700 x 600 mm spindle sleeve stroke: 275 mm spindle turning speed range: 32 - 1030 rpm carriages: 4: 0,1 - 0,4 mm engine: 380 V, 2,2/3,7 kW Rodpfoy R Thjx Aamon space needed: 700 x 1200 x 2700 mm weight: 1240 kg

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, rotational speed (max.): 2,900 rpm, rotational speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, overall weight: 260 kg, table length: 560 mm, table width: 250 mm, 3-phase 380V, 2-speed motor is running perfectly! Spindle RPM adjustable from 100 up to 2900. Geared head. 115mm drilling depth. MT3 spindle taper. Head adjustable in height and angle. Coolant pump in base. Cross table in good condition. Table dimensions: 560x250mm Made in Sweden! Overall dimensions: 100x75x170cm Rodpfxoxnvrvj Aamjn Includes all accessories shown in the pictures. Contact us for shipping options! €2,800.00 EX VAT!

Year of construction: 1996, condition: good (used), machine/vehicle number: 337978, Technical data: - Drilling capacity in steel ST 60 25 mm - Drilling spindle holder MK 3 - 8 drilling spindle speeds 100 - 2700 rpm - drill spindle stroke 130 mm - 4 feeds 0.1 - 0.3 m/rev - Overhang 270 mm - Column diameter 115 mm - drilling unit + table height adjustable Rsdofmh R Uepfx Aamsn -with crank handle over rack - Table dimension 350 mm - Drive 400 V / 0.8 / 1.1 kW - Space requirement approx. W 800 x H 1850 x D 900 mm - Weight approx. 250 kg

Condition: used, functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, spindle mount: MK 3, type of input current: three-phase, table length: 560 mm, table width: 250 mm, 3 Phase 380V, 2-speed motor is running fine! Geared head with 8 spindle speeds. Spindle RPM adjustable from 100 up to 2900. Drilling & milling possible. Table size: 560x250mm MT3 spindle taper. Head height adjustable. Head can be angled. Rodpfjxdb T Dex Aamjn Maximum drilling depth: 115mm Made in Sweden. Overall dimensions: 100x75x170cm Weight: 260KG – Return spring is not functioning properly. Contact us for shipping possibilities! € 2.850,00