Used Are Bolts for sale (2,556)

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt Dcodoycqrbjpfx Afpjc frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: good (used), Year of construction: 2012, Marel I-Cut 10 Portion Cutter The I-Cut 10 PortionCutter is an accurate and reliable portioning machine designed to give immediate results on your bottom line. With only a few touches to the control panel you can move away from inaccurate cutting by hand to accurate portions of boneless meat products – beef, pork and veal – on weight every time. The I-Cut 10 enables you to make substantial savings on labour because of the speed and versatility of the machine. Improvements in yield will furthermore secure a very fast payback on your investment. The design of the machine makes it very easy to clean securing a high hygienic level and the small footprint means it will t into almost any plant layout. Technical data: Belt speed: 0,01 – 0,34 m/sec 10 cuts/s Dcedsyhnb Rjpfx Afpoc Belt width: 280 mm Belt length (in-feed/out-feed conveyor): 4025/2162 mm Temparature: 0-30 оC Water consumption: 0-2 l/min Voltage of power source: from 3 x 400 V to 3 x 480 V + PE Power consumption: 4 kW Frequency: 50/60 Hz Automatic circuit breakers residual current: Type B, 500 mА Dimensions (L x W x H): 2.700 x 980 x 1.560 mm Weight: approx. 360 kg Year: 2012

Condition: good (used), functionality: fully functional, DAREX SP 2500 - Spiral Drill Grinding Machine - Grinding capacity: 1.5 - 26 mm - 3 x tool holders - 1 x spare grinding wheel - Machine base Dodpfxjygutds Afpocc - Documentation Dimensions (LxWxH): 0.5x0.5x1.6 m / Weight: 85 kg Subject to errors and omissions.

Condition: good (used), MAREL? grader / Outsorter. Conveyor length - 523cm. Dcodpsfgwpkefx Afpec Conveyor width - 50cm. Conveyor height - 162cm. Length of grader arms - 68cm. Without check weigher.

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Dcedpfx Afemrrwfjpsc Please note that the photos probably show two different ovens, both are very similar.

Condition: good (used), machine/vehicle number: 3324, Year of construction: 2017, load capacity: 8,000 kg, lifting height: 6,340 mm, mast type: triplex, fork carriage width: 150 mm, fork length: 2,400 mm, total length: 3,600 mm, total width: 2,200 mm, operation weight: 16,500 kg, additional equipment features: Battery indicator, Side extraction of the battery, Dual tread, Warning triangle, Equipment: lighting, Carer A80-900X from Uniktruck Dcodpfxjwd T A Tj Afpjc

Year of construction: 2024, condition: good (used), functionality: fully functional, For sale: a high-quality cleanroom, recently constructed and previously used for injection moulding production of medical products. The cleanroom was installed in 2024 and is currently being dismantled due to the cessation of activities. Dedpfxeygl I So Afpjcc General information: • Area: approximately 500 m² • Year of manufacture: 2024 • ISO Class 7 • Previously used in a medical production environment • Cleanroom will be delivered completely empty • All walls and modular panels are included in the sale Design and construction: The cleanroom is built from modular panels, offering maximum flexibility for the buyer regarding reconstruction and layout. This makes the cleanroom particularly suitable for: • Medical injection moulding production • Assembly of medical devices • Pharmaceutical applications • Electronics, cosmetics, precision assembly • Dryroom • Box-in-Box production The modular design allows: • Full freedom to configure the layout according to your requirements. Additional panels can be sourced from the original supplier if needed. • Relocation and reassembly of the cleanroom at a new site (supplier support available). • Easy expansion or downsizing of the space. Condition and availability: • The cleanroom is in excellent condition, recently constructed and professionally maintained. • Dismantling is currently underway, making quick availability possible. • Complete plans and layout details are available upon request. For further information, additional specifications, or to arrange a viewing, please contact us.

Condition: good (used), machine/vehicle number: 2672, Year of construction: 2022, load capacity: 16,000 kg, lifting height: 4,170 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,120 mm, total width: 2,500 mm, operation weight: 31,630 kg, additional equipment features: Rear mud guards, Warning triangle, Battery indicator, Dual tread, Side extraction of the battery, Front mud guards, Equipment: lighting, Carer A160-1200X from Uniktruck Dodpfxstzp Svs Afpjcc

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Djdpfx Afox Altfjpscc Please note that the photos probably show two different ovens, both are very similar.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 259817, Offer 25260 Dcjdpfx Asyfgb Dofpjc Technical data: - Working range: 1.5 - 26 mm - Speed: 2800 rpm - Drive: 220 V - Required space approx.: W 450 x H 1250 x D 500 mm - Weight approx.: 60 kg - Collets

Condition: used, Brand: Carer Model: R 30 NS, CE Machine in working condition, available for testing. • Power supply: Electric • Load capacity: 3,000 kg (30 q.li) • Wheels: 4 • Mast type: Simplex • Fork length: 1,600 mm • Equipped with side shifter • Maximum lifting height: 3,300 mm Dcedpfx Ajw Avcysfpec

Condition: excellent (used), functionality: fully functional, A Bareiss digital hardness tester in good, used condition is for sale, as shown in the pictures. Technical data: • Manufacturer: Bareiss Prüfgerätebau GmbH • Model: Digi-Test II • Hardness testing method: Shore A - D - IRHD M • The modular digi test II offers you maximum flexibility in hardness testing of elastomers, polymers, soft elastic materials, composite materials, and foams. In just a few simple steps and without tools, the numerous measuring devices can be exchanged according to Shore, VLRH, or IRHD, allowing you to quickly switch between different measuring methods. The hardness measurements are fully automatic, reducing user influence to a minimum. A connected electronic unit recognizes the selected measuring device, automatically switches to the appropriate measuring method, and guides you through the test sequence via the user-friendly menu. • With many accessories, operating instructions, drivers • Condition: Used, functional Insured shipping costs: €30 You will receive an invoice with VAT shown separately. Dcedpfjyfmm Tox Afpec Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Storage location: Shelf 1

Condition: used, Technical details: Dcodpfeu N Dw Dex Afpoc weight of the machine approx.: 8kg kg dimensions L x W x H: Ø 160mmx 85 mm m Origin Germany Weight 10kg Ø 160mm x 90mm magnetic core 3 pieces, W: 20mm; distance: 36mm *

Condition: used, Year of construction: 1988, Technical details: plate width: 2050 mm plate thickness: 2 mm distance between columns: 2400 mm knife length: 2050 mm Dedpfx Afju Ib Dfepecc stroke adjustment: oben 250 mm adjustment of stroke: unten 100 mm bending angle max.: 180 ° back gauge - adjustable: mit Aufnahmeschienen mm working pressure: 5,0 MPa total power requirement: 2,2 kVA weight of the machine ca.: 2,3 t dimension machine xH: 3,5 x 1,0 x 2,2 m dimensions of hydaulic: 0,75 x 0,55 x 0,80 mm HYDRAULIC FOLDING MACHINE operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam = 100mm bending jaw stroke = 100mm bending gap = 7mm with scale display *

Condition: good (used), Year of construction: 2012, Marel I-Cut 10 Portion Cutter The I-Cut 10 PortionCutter is an accurate and reliable portioning machine designed to give immediate results on your bottom line. With only a few touches to the control panel you can move away from inaccurate cutting by hand to accurate portions of boneless meat products – beef, pork and veal – on weight every time. The I-Cut 10 enables you to make substantial savings on labour because of the speed and versatility of the machine. Improvements in yield will furthermore secure a very fast payback on your investment. The design of the machine makes it very easy to clean securing a high hygienic level and the small footprint means it will t into almost any plant layout. Technical data: Belt speed: 0,01 – 0,34 m/sec 10 cuts/s Belt width: 280 mm Belt length (in-feed/out-feed conveyor): 4025/2162 mm Temparature: 0-30 оC Water consumption: 0-2 l/min Voltage of power source: from 3 x 400 V to 3 x 480 V + PE Power consumption: 4 kW Frequency: 50/60 Hz Automatic circuit breakers residual current: Type B, 500 mА Dimensions (L x W x H): 2.700 x 980 x 1.560 mm Weight: approx. 360 kg Year: 2012 Djdsyf Eqkjpfx Afpjcc

Condition: good (used), Year of construction: 2020, Display, display module, display panel Dodpsx Sp Ubsfx Afpocc -Manufacturer: Rittal Carel, Display Panel -Rittal: Type LKH -Carel: Type RITRC000T0001 -Dimensions: 440/190/H60 mm -Weight: 0.6 kg

Condition: used, Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2900 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 490/260/H310 mm Djdoct A Injpfx Afpocc -Weight: 52 kg

Condition: used, Contactor, semiconductor contactor, contactor, power contactor -Maximum: 22 kW 660 V Dodpfx Afedngwfspocc -Price: per piece -Number: 8x available -Dimensions: 135/85/H115 mm -Weight: 6.5 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor Dodpfxsc U Rias Afpjcc -Manufacturer Motor Marelli Motori Type: TM96010 -Manufacturer transmission Motovarici type: TK/002/R -Motor power: 0.22 kW -Speed range: 43.1-200 RPM -Motor: adjustable -Drive shaft: Ø 19 mm -Dimensions: 415/135/H180 mm -Weight: 14 kg

Condition: used, Electric motor, three-phase motor Dcsdpfxecf Dh Eo Afpec -Power: 0.75 kW -Speed: 1440 rpm -Wave SW: 17 mm -Construction: B3 -Protection class: EX -Dimensions: 423/290/H240 mm -Weight: 27 kg

Condition: used, Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: MK5 holder -Type: 5x50x63 TGL 29696/02 -Dimensions: Ø 90 x 260 mm Dsdpfx Aeucah Aofpjcc -Weight: 4.4 kg

Condition: used, tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves Dcjdpfsuu U Uiox Afpoc -Milling holders: MK5 holder -Type: 5x50x25 30-1243 -Dimensions: Ø 90 x 210 mm -Weight: 2.2 kg

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor Dedpfx Afod Sp I Ajpscc -Square D basic module: PD 3.10 E -Class: 8502 -Price: per piece -Number: 25 pieces -Dimensions: 88/49/H75 mm -Weight: 0.4 kg/piece

Condition: excellent (used), High-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 11 kW Dcodpfx Ajb Uhp Rsfpjc -Density: 1.2 kg/m³ -Volume output: 84 m³/min -Pressure increase: 3800 Pa -Connection input: Ø 275 mm -Connection output: Ø 270 x 130 mm -Dimensions: 1000/800/H700 mm -Weight: 252 kg

Condition: used, Year of construction: 1993, Gearbox, spur gear, angle gear, worm gear -Manufacturer:GHIRRI CESARE, worm gear type VQ 03 -Translation: R. 1/10 Dedpfot Snwljx Afpscc -Hollow shafts: Ø 11 x 28 mm / Ø 14 x 62 mm -Dimensions: 105/90/H110mm -Weight: 1.3 kg