Used Arunda Mills for sale (9,467)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Milling machine Macmon M 434 NC Manufacturer: Macmon Type: 434 NC Control: Heidenhain TNC 128 Year of manufacture: 2008 Condition: used X-axis: 400 mm Y-axis: 250 mm Z-axis: 400 mm Clamping surface 600 x 320 mm Main drive: AC motor kW 3 Speed range: Vertical infinitely variable 30 - 6300 Ncsdpoy Egccefx Akfor Horizontal stepless 0 - 4200 - Feed rate 0 - 10 m/min Tool holder ISO 40 Operating voltage 400 / 50 Volt / Hz Control voltage 24V Weight 1200 kg Scope of delivery - Documentation - Machine feet - Coolant system - Spindle guard - Machine light - HR410 Handwheel - Horizontal spindle Counterholder

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 1,00,000 mm, total length: 2,12,000 mm, overall weight: 1,00,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Ncsdpferx Rxtjx Akfor Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 16,000 m/min, feed rate Y-axis: 16,000 m/min, feed rate Z-axis: 16,000 m/min, spindle speed (max.): 4,000 rpm, table width: 900 mm, table load: 10,000 kg, table length: 2,700 mm, total height: 3,440 mm, total width: 6,000 mm, total length: 7,000 mm, overall weight: 24,000 kg, power: 38 kW (51.67 HP), CNC Bed-Type Milling Machine Ki-Heung - U1050 MACH-ID 9598 Make: Ki-Heung Type: U1050 Control: HeidenHain iTNC530 Year: 2014 A4 Automatic head 2.5 x 2.5 Degrees Drum AC 24 positions HeidenHain iTNC530 Ncjdpfx Akey Ew Suofor HeidenHain HR-410 Wandwheel Flatt guideways / High Ridgid machine  Oil Chiller Covered CE-Doors X-Axis: 2500mm Y-Axis: 1050mm Z-Axis: 1600mm Table Length: 2700mm Table Width: 900mm Table load: 10000 Power on spindle: 38kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 16000mm/min. Feed rate Y-Axis: 16000mm/min. Feed rate Z-Axis: 16000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 7000mm Width: 6000mm Height: 3440mm Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Ncodjy D Tl Ijpfx Akfsr Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment Ncjdpfx Akey Enwujfer * Central lubrication * Tailstock with counter bearing * Manual

Condition: used, Year of construction: 2001, Technical details: turning diameter: 120 mm turning length: 100 mm control: Fanuc Spindle 1 power: 7,5 kW Spindle 1 RPM: 4500 1/min Spindle 2 power: 7,5 kW Spindle 2 RPM: 4500 1/min Distance between spindle noses: 600 mm Turret No.1 stations / rotary tools: 15/15 Power rotary tools turret 1: 2,7 kW RPM of rotary tools turret 1: 4000 1/min Turret No.2 stations / rotary tools: 15/15 Power rotary tools turret 2: 2,7 kW RPM of rotary tools turret 2: 4000 1/min Travel x/z turret 1: 250 / 300 mm Travel x/z turret 2: 250 / 920 mm Nedoy D Nxdjpfx Akfecr Bar capacity spindle 1: 51 mm Bar capacity spindle 2: 51 mm power chuck: 165 mm Spindle bore sp. 1: 62 mm Spindle bore sp. 2: 62 mm dimensions of the machine ca.: 3700 x 2300 x 3000 mm weight of the machine ca.: 5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 120 x 100 mm Doublegripper capacity 2 x 3 kg *

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm z-travel 420 mm Nedpfx Aksymqxcsfecr Control Heidenhain / Millplus total power requirement 35 kW weight of the machine ca. 5,7 t

Condition: used, Used machine Equipment and technical data: - Vertical spindle travel: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3,500 - 7,000 rpm - With fixed spindle - Motor: 2.5–3.1 HP Nsdpfjy Dkgpex Akfecr - Table: 830 x 700 mm - Slotting cutters up to 340 mm - With metal-jaw milling fence (Note: The Aigner parallel fence shown in the photos is not included in the scope of delivery!) - With 3-roller feed Weight: 240 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2017, Milling machines Travel distance X: 800 mm Ncjdpfx Akeym Rrvofor Travel distance Y :800 mm Travel distance Z: 550 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain TNC 640 spindle chuck: HSK-A63 spindle revolutions: 20000 rpm Speed range to: 20000 U/min table size X: 450 mm table size Y: 450 mm max. workpiece weight: 300 kg tool changer: 170 - time input Power : 25 kW Torque: 120 Nm Rapid traverse: 50 m/min feed rate: 50000 mm/min spindle cooling chip conveyor control Heidenhain 5-axis CNC machining center Heidenhain TNC 640 control 170-position tool changer HSK-A63 spindle interface KNOLL chip conveyor KNOLL oil filtration system KF 400 / FKA 620 HABOR cooling unit suitable for steel machining high precision for tool and mold making automated workpiece handling for series production

Condition: used, This Maho CNC universal milling machine, type: Maho MH 800 C, is being auctioned in our industrial auction / machinery auction - mixed auction of vehicles, forklifts, containers, and sales trailers, held online. Ncjdpfxsy Dpfqj Akfor

Condition: excellent (used), Spindle diameter: 100mm Spindle taper: ISO50 Table: 1120x1000 Nodpfxey A Emue Akfscr Table load: 3t

Condition: new, Year of construction: 2026, Multifunctional, efficient milling machine, designed for working with stone, manufacturing tombstones but also for wood materials, MDF, plywood, plexiglas. Made of steel and cast iron. Features Rigid device with a precise resolution and full interpolation in each of the X, Y, Z axes Tool height sensor Central lubrication Double vented control panel Strengthened design Water table for material cooling Strengthened guiding rolls - improve inserting and removing workpieces Capabilities tombstone manufacturing (all kinds of stones, ceramics, glass, granite, marble, etc.) stone reliefs, engraving, milling, etc. wooden materials, MDF, plexiglas, plywood, etc. Technical data Working area 1300x2500 (1500x3000mm) Z-axis 400 mm (raised gantry) Spindle 5.5 kW flood coolant Inverter 7.5 kW Controller DSP - digital data processing + RichAuto-AutoNow-A11E control Ncsdei Ab Akopfx Akfer Linear guides Hiwin Software Artcam The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: good (used), End mill, roller cutter, milling cutter, disc cutter, slot cutter -Cylinder end mill: Disc cutter 99.6 kg net, carbide-tipped -Type: various versions -Price/Fee: complete Ncodoy D Ndyopfx Akfjr -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg

Condition: excellent (used), End mill, end mill, cutter, face mill, milling head -Manufacturer: PWZ, End mill, angle end mill, cylindrical end mill, original packaging, carbide-tipped Njdpfx Akoy D Nblsfecr -Type: 100x50x40 251G-TH10 66-007 -Hole: Ø 40 mm -Number: 9x milling cutters available -Price: per piece -Box dimensions: 125/115/H70 mm -Weight: 1.6 kg/pc.

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. Ncodpfxjxc Rmqj Akfjr All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Number of milling spindles 4 St. fence ja ja /nein workpiece ja Stegherr KSF 2/4 - The modern, practical machine concept for efficient crossbar production. Years of expertise and a sophisticated, thousands-proven machine guarantee precision at an optimal price-performance ratio. Particular emphasis is placed on the machine's ease of use and flexibility. KSF 2/4 upgrade: Milling units A1, A2, A3 as with KSF 2. + Milling unit A4, machining of the counterpart without turning, view side absolutely tear-out-free. Digital fence (moving carriage, reliable and quick readability to 1/10 mm). foot switch With tools in the machine as shown in the pictures plus 2 additional profile cutters, see pictures. Further accessories are shown in the pictures. Compressed air pressure: p = 6 bar The following work was carried out on the machine: - Maintenance unit replaced - Pneumatic hoses replaced Ncodpoy Dvm Ijfx Akfor - Plexiglas cover and gas spring for opening/closing the cover replaced - functional check (Manufacturer's technical data - no guarantee!)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 75385, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 80 mm, spindle speed (max.): 2,500 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect within the period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Spindle speed: 50 - 2,500 rpm Feed rate X/Y/Z-axis: 5 - 1,000 mm/min Rapid traverse X/Z-axis: 4 m/min Rapid traverse Y-axis: 2 m/min Tool holder: ISO 40 Quill stroke of horizontal and vertical working spindle: 80 mm Table dimensions: 730 x 410 mm Number of T-slots: 8 MACHINE DETAILS Control: HEIDENHAIN TNC 135 Operating voltage: 380 V Frequency: 50 Hz Ncedpjy D Swijfx Akfer Connection rating: 10 kW Rated current: 50 A Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,100 x 2,200 mm Machine weight: 2,000 kg EQUIPMENT Workshop drawer cabinet with SK 40 holders Clamping devices External reference: 13

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Ncedpfx Akjy Dvnxjfsr Prior sale is reserved.

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1616, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 450 m/min, spindle speed (max.): 2,500 rpm, No reserve price - guaranteed sale to the highest bidder! Placing a bid commits you to collect the item within the scheduled period between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Spindle speed range: 40 to 2,500 rpm Table dimensions: 600 x 210 mm Number of feeds: 16 Feed rates: 28 to 450 mm/min Njdpfxoy D Shnj Akfecr Number of slots: 4 Tool holder: SK 40 MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,000 x 1,200 x 1,700 mm Machine weight: 1,000 kg EQUIPMENT Mounted vice (jaw width: 110 mm) Set of tool holders Milling cutters Collets Three-axis digital readout (manufacturer: FAGOR) External reference: 10

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Technical details x-travel 3500 mm y-travel 1500 mm z-travel 1500 mm Additional information Heidenhain TNC 640 HSCi CNC Control Travels: X-axis 3500 mm Ncsdpey Ec Afefx Akfor Y-axis 1500 mm Z-axis 1500 mm Table size 1300 x 1250 mm Total length of the table 2500 mm Integrated rotary table 1200 mm Spindle taper SK 50 BIG PLUS Spindle speed 6000 rpm Accessories: Automatic orthogonal milling head 0.02 degrees x 0.02 degrees 60-tool magazine External cooling 17 bar Through-spindle cooling 70 bar Tank capacity 1000 liters Oil separator and micro-ventilation Hexagon M&H workpiece measuring system Full enclosure with roof

Year of construction: 2009, condition: used, machine/vehicle number: 16-TS5-6, 0 kVA, HEIDENHAIN control, T-slot mounting table size: approx. 2000x2500 mm, 60-position tool changer AITEK H-60, chip conveyor, hydraulic unit, industrial cooling, belt filter, 3 adapters, safety enclosure Ncjdpfxoy D Ty Ej Akfor

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Nodjy Ehcdopfx Akfscr Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Location: ex-stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1995, Control: HEIDENHAIN TNC 415 B Travel: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Ncjdpfx Ajw Uin Sskfor Spindle taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, various tools (without cabinet)

Condition: used, Year of construction: 2002, x-travel 3000 mm y-travel 1600 mm z-travel 1500 mm table-size (2x) 2000 x 2000 mm Nsdpfoy D T Rkex Akfscr control TNC 430 B spindle turning speed range 60 - 3000 U/min spindle taper ISO 50 feeds mm/min table load 3 t milling drive 25 kW total power requirement 50 kW weight of the machine ca. 26 t dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Machine has 6 axes controled, X/Y/Z, C- axe table rotation and A/B axes for universal head. Machine has a 40 position ATC, cooling through spindle, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and two pallets in the pallet changer. Machine in program 22.347 hours.

Condition: used, Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1500 mm table-size 3000 x 1400 mm control TNC 430 B spindle turning speed range 60 - 3000 U/min spindle taper ISO 50 feeds mm/min table load 5 t milling drive 22 kW Ncsdpfxey D T Rde Akfer total power requirement 50 kW weight of the machine ca. 22 t dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Universal milling head is automatically swivable and turnable in 1,5° steps. Machine has a 20 position ATC, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and a mist cooling arrangement. Machine in program for 25.616 hours.