Used Asphalt Technology for sale (24,126)

Condition: new, Year of construction: 2025, Turbo mill MTR-800 The turbo mill is designed for grinding, knocking out, granulating of materials in order to improve the quality of final separation in further recycling processes. Technical date: - Installed power –75kW - Chamber width – approx. 910mm - Chamber diameter – approx. 620mm - Number of abrasive knives – approx. 89 pcs. Kjdpfx Aaov I S Ukebodu - Number of abrasive counterknives – 18 pcs. - Structure placed on adjustable vibration isolators - Dimensions – 2200 x 1600 x 1550mm - Chamber opening by means of a manual hydraulic pump - Engine base with a rocker tensioner - Weight – approx. 1950kg- -Discharge ended with an orifice fi-150 -Electrical installation with inverter included in the price.

Condition: used, functionality: fully functional, Year of construction: 2019, Type: SG-3000-2DD Kedpjwarqzsfx Aabedu Info: Max.Glass Dimension: 1800*2800mm (bottom floor); 2000*3000mm (top floor) Max.Glass Thickness: 15+15mm Min. Glass Thickness: 3+3mm EVA Film Thickness: 0.25-0.76mm Machine dimension: 3680*2260*1650mm Machine weight:2ton Installed Power: 46KW Heating power: 43KW Heating temperature 0-130C Electricity 380V 50HZ Sensors: 8 Available glass: float glass +float glass; tempered glass + float glass Vacuum value: -0.1Mpa

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, total width: 87 mm, total length: 120 mm, maximum load weight: 200 kg, heating capacity: 7.2 kW (9.79 HP), tank capacity: 400 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 600 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece weight (max.): 200 kg, LCT NW 180 BSS demonstration tank Dual frequency 27/80 kHz Ventilated stainless steel control cabinet Hinged lid Kdjdpfeq Rd R Djx Aabeu Tank completely insulated Stainless steel washing cork with four crane eyes and a basket bar for lifting Four adjustable feet for uneven floors Floor emptying via ball with inclined tray base for complete emptying Floor grating Bottom and 2 x side sound with a total output of 3000 watts Timer with timer and program control Connected load 10.2 KW

Year of construction: 1999, condition: used, power capacity 1,5 kW Kdsdpju Sbd Tsfx Aabju feed pressure 11 bar liter capacity 160 l weight of the machine ca. 0,15 t dimensions of the machine ca. 1,5x0,5x0,8 m 380 V, 50 Hz with plug and cable colour: light grey 2 cylinder, boiler 90 l compressor has been checked in our workshop, electr. testing report included!

Condition: new, Year of construction: 2023, Wood gasification technology that converts biomass (wood chips) into wood gas. The obtained wood gas is used in the production of electricity and heat. Gasifiers are reaching electrical efficiency up to 30% and with fuel utilisation rate up to 90%. The capacity of one unit is up to 140 kWel and heat up to 300 kWth. System is modular and can be used both for small project and also larger plants with electrical power up to 2000kWel and heat up to 4000kWth. Energy-producing systems are additionally equipped with wood gas filtration and cooling systems, ash removal, and emergency cooling systems. Offer for one unit include : - Wood chip feed module - Gasifier - Control cabinet for gasifier Ksdpopa Sthjfx Aabedu - Air preheater - Gas filter - Gas cooling module - Safety filter module - Ash discharge module - Cold start module - Waste bunker - Wiring set - Engine unit with generator - Control cabinet for engine - Gasifier chimney for cold start - Chimney for engine

Condition: new, Year of construction: 2025, travel distance X-axis: 390 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 2,000 rpm, spindle speed (max.): 24,000 rpm, overall weight: 450 kg, tool diameter: 14 mm, warranty duration: 24 months, power: 2 kW (2.72 HP), If you are looking for a real machine and not a toy, then you have come to the right place: immediately ready for use, engraving, milling, drilling, for effective plastic and light metal processing. CNC DIN ISO G code milling machine including handy CNC control Working area: with T-slot table X=390mm Y=230mm Z=300mm Basic frame of the milling machine made of cast elements approx. 280kg with base cabinet for necessary machine assemblies such as cooling and power supplies / inverter and control approx. 170kg All axes with ball screws and 25 mm linear guides including dust protection and manual central lubrication for all axes including encoder-monitored axis drive! High-frequency spindle up to 24,000 rpm 2kW water-cooled Collet ER20 up to max. 14 mm milling tools - optional G code controlled minimum quantity lubrication - optional G code controlled suction - optional G code controlled vacuum table solution (* Prices depending on equipment, control and spindle, this is a brand new milling machine from our production) The milling machines are 100% manufactured according to customer requirements in our factory in Plauen! Illustrations show different equipment variants; You will receive a brand new milling machine from our production) Technical characteristics: · Drive system: high-precision ball screw · Working speed: max. 6000 mm/min x-y-z working area / travel range: 390 mm x 230 mm x 300 mm · Passage height: 300 mm x-y-z increment: 0.01mm/increment x-y-z repeatability: 0.02 mm · File formats: G-code, ISO data · HF milling spindle: 2.2 kW water-cooled, others optional · Spindle speed: 6,000 - 24,000 rpm Kdsdpfx Asi Hb I Tjabeu Tool chuck ER20: Power connection: AC 240V, 50Hz · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm · Weight approx. 475 kg with base cabinet

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information Kodpsh D H Rcjfx Aabodu

Condition: new, Year of construction: 2025, The laser processing center skyCUBE M / P / SL - the new standard in laser material processing! (* Prices depending on equipment, this is a brand new laser machine from our production) Laser options according to your needs: CO2 laser 150W / 250W / 400W or fiber laser 1500 - 6000W PFEIFER laser processing center skyCUBE Processing areas: Mclass = X 1250 x Y 650 x Z 100mm Pclass = X 1250 x Y 1250 x Z 100 mm SLclass = X 1250 x Y 2550 x Z 100 mm skyCUBE laser processing center - the new multifunction laser engraving machine and laser cutting machine - laser processing easy - high precision - laser engraving, cutting with high speed and quality. Our new and best multifunctional talent not only impresses the most experienced user with its newly thought-out construction. This CO2 laser / fiber laser shows its outstanding capabilities as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser in all industrial applications. With an optional laser power of up to 1500W (1.5kW), the CO2 laser device / fiber laser system can also be used extremely flexibly in your production. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving many materials, such as: various metals, acrylic glass, solid wood and wood-based materials, wood composite materials, paper, cardboard, various plastic and foam materials, textiles, and much more The excellent design of the laser machine, 100% produced in Plauen/Germany, guarantees the laser user a high working accuracy with consistently high quality from the metal construction to the laser source. With a cutting speed of up to 8000 mm/s and an engraving speed of up to 4000 mm/s, the high-quality laser technology produces clean and very sharp cut edges and precise laser engravings. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. User-friendly and intuitive - the supplied skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to the Windows standard lets you work quickly and effectively. The software is characterized by high system stability, professional monitoring with appropriate machine operation and control as well as compatibility with common file formats. The data is output via levels - separately for each level, including definition of the sequences and the type of processing. The parameters, such as laser power and processing speed, are automatically saved for each level and can therefore be retrieved in a material database at any time and can be reproduced. With a computer connected via LAN / USB interface, the laser projects are transferred to the skyCUBE M laser processing center. From there, these can be processed repeatedly without the PC having to be switched on. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: Kdjdpfx Aobnphveabou German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet

Year of construction: 2022, condition: new, ZLOMIARZE Recycling Technology - LRK Recycling line The Mini Line is a high quality set of devices designed for the recycling process. Shredding and separation are essentials in this business, that’s why Mills from TORNADO series was designed for rapid reaction on feeding materials with being in a chamber for short time. Suitable sieves placement and balanced cutting rotor RPM provide uniform material fraction. Innovated implementation of water system with adjustable pressure in the Wet Separators GOLD RIVER series provides highly accurate separation of difficult materials. ❖LRK - 50 The set consists: • 11kW Grinding Mill – Tornado 400 • Compact Dust collector • Transport Conveyor • Wet Separator – Gold River 300/1250 Technical Specification: • Complete Set Power – 13 kW • Supply – 400 V ; 50 Hz • Performance – 50 kg/h (this is a real value, checked on basic materials). • Dimensions – 3500 × 600 × 1950 mm • Weight – 950 kg ----- ❖LRK - 100 The set consists: • 15kW Grinding Mill – Tornado 500 • Compact Dust collector • Belt Conveyor • Wet Separator – Gold River 500/1250 Technical Specification: • Complete Set Power – 20,2 kW • Supply – 400V ; 50Hz • Performance – 100 kg/h (this is a real value, verified on basic materials). • Dimensions – 5000 × 4000 × 2000 mm • Weight – 1300 kg ----- ❖LRK - 200 Kdjdpfjhix Daox Aabsu The set consists: • 15 kW Grinding Mill – Tornado 500 • Dual dust collector • 1st line belt conveyor • 18,5 kW Grinding Mill – Tornado 500 • 2nd line belt conveyor • Wet Separator Gold River 500/2500 Technical Specification: • Complete Set Power – 40kW • Supply – 400V ; 50Hz • Performance – 200 kg/h (this is a real value, checked on basic materials). • Dimensions – 5000 × 4000 × 2000 mm • Weight – 1300 kg ✔Spare parts included. Recyclable resources: ✔ Any kind of Aluminium cables ✔ Automotive cables with adhesive tape ✔ Cords and network cables ✔ Coax cables, Christmas lights ✔ Copper cables lined with gel or silicone ✔ Winding coil of a thickness 15 microns, contaminated with adhesive paper or plastic Contact us for more information!

Condition: new, Year of construction: 2025, 2D / 3D FIBER LASER MARKING MACHINE skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications Our systems are used skylaser Mark exactly where the conventional CO2 laser technology has its limits. By means of the fiber laser with a wavelength of 1064 nm can also be realized delicate structures in almost any material. In contrast to conventional milling process, the laser operates without contact, without force and without tool wear. Benefits in your application is the geometric flexibility and high machining accuracy. Regardless of the hardness of the workpiece to be machined, this type of processing to be applied. With the work table adjustable to your needs and increases the flexibility of the mobile system. You can easily integrate the system into your production line, or operate as a stand-alone solution. Our Mark skylaser provide very precise and permanent markers (laser engraved) and the laser application area metal and certain organic substances suitable for the special. The use of a variety of fonts, apply bar codes, serial numbers, logos, and images is easily possible. Thanks to the excellent resolution almost all requirements of marking tasks can be solved. Manufacture of stamping dies, engraving, labels and more complex, fine structures, the software is extremely user friendly. Even very complex and elaborate marking tasks can be easily supplied to the industrial PC to easily create. The exact positioning is done in no time, thanks to the Optional camera for process monitoring and tracking software-based workpiece alignment. 2D / 3D FIBER LASER MARKING MACHINE skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications Our systems are used skylaser Mark exactly where the conventional CO2 laser technology has its limits. By means of the fiber laser with a wavelength of 1064 nm can also be realized delicate structures in almost any material. In contrast to conventional milling process, the laser operates without contact, without force and without tool wear. Benefits in your application is the geometric flexibility and high machining accuracy. Regardless of the hardness of the workpiece to be machined, this type of processing to be applied. With the work table adjustable to your needs and increases the flexibility of the mobile system. You can easily integrate the system into your production line, or operate as a stand-alone solution. Our Mark skylaser provide very precise and permanent markers (laser engraved) and the laser application area metal and certain organic substances suitable for the special. Kjdpfx Aobnpd Njabsdu The use of a variety of fonts, apply bar codes, serial numbers, logos, and images is easily possible. Thanks to the excellent resolution almost all requirements of marking tasks can be solved. Manufacture of stamping dies, engraving, labels and more complex, fine structures, the software is extremely user friendly. Even very complex and elaborate marking tasks can be easily supplied to the industrial PC to easily create. The exact positioning is done in no time, thanks to the Optional camera for process monitoring and tracking software-based workpiece alignment. Views housing patterns: We adapt "us" and your machine to your tasks!

Condition: new, Mini Cable Recycling Line with a capacity of 50-80kg/h The set includes: 11kW grinding mill - TORNADO 320 Compact dust removal system Belt conveyor Water separator - GOLD RIVER 300/1250 Technical data of the installation: Installed power - 13kW Power supply - 400V; 50Hz Batch efficiency - 50kg/h (this is a real value, checked on basic materials). Dimensions - 3500x3600x1950mm Weight - 950kg Spare consumables included. This is a set of high-quality devices created for cable recycling. The basis of the entire recycling process is proper fragmentation and separation, TORNADO series grinding mills have been designed so that the input material leaves the chamber in a short time, the enlarged sieve area and balanced rotation of the cutting rotor provide us with uniformly cut material fractions. The use of an innovative water system with pressure control valves in GOLD RIVER series separators allows for very precise separation of materials that are difficult to separate. The introduction of a new separation mat solution in combination with several other technical parameters allows for the separation of a single copper wire with a thickness of 15 microns [µm]. At the same time, maintaining the ideal purity of the plastic. Solid Polish workmanship supported by experience ensures a very long service life. The materials used for production are carefully selected in terms of type and meeting the appropriate strength parameters. We provide full post-warranty service throughout the country, we have every part for the offered devices. Recyclable materials: Aluminum cables of all kinds Kjdpfev I Skrjx Aabodu Car harnesses with adhesive insulation Computer tapes Network and telephone cables Coaxial cables, Christmas tree lights Copper wires filled with silicone or gels 15-micron winding coils, contaminated with plastic and sticky paper Winding coils filled with silicone coating IMPORTANT!! We provide real performance!

Condition: new, Year of construction: 2025, PFEIFER technology skyCUBE P class 1250 x 1250mm - 200W CO2 laser The flatbed laser center (* Prices depending on equipment, this is a brand new laser machine from our production) The multifunctional flatbed laser center skyCUBE, produced by PFEIFER technology in Saxony/Germany, was developed for your professional cutting tasks and classic laser engravings. It combines high productivity with economy and precision. Your purchase will therefore pay for itself after a short time. The machine housing, made of welded and screwed steel construction, is designed for industrial and commercial use. The drive system developed by PFEIFER technology ensures precision and high repeat accuracy. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. Simple, user-friendly and intuitive - the skyCUBE PC software makes planning, executing and controlling your production tasks child's play. The processing of your project data takes place via levels (colors), whereby the order and processing type can be specified separately for each level. The determined parameters can be permanently stored and retrieved in a material database. The laser programs are transferred to the machine control with a computer connected via a LAN/USB interface. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet 8" touchscreen display simply see more, control more, communicate more with the skyCUBE laser processing center Redundant safety system - Class 1 laser Safety: Shutter --ᐳ active mechanical beam path shutter pull-out work table drawer integrated access and observation hatch pull-out clippings drawer Air-washed optics - filtered air supply to all laser components to protect the optics program-controlled process gas control Drive system developed by PFEIFER technology for precision and high repeatability PFEIFER technology mirrors and optics for perfect results with laser engraving and cutting CO2 laser IRADION®, SYNRAD®, laser sources for perfect laser beam quality and quality over a long period of time tested and stable brand power supplies according to the laser source illuminated machine interior Easy-to-learn operation even without advanced CAD knowledge Safety: BG certified emergency stop / door and safety monitoring Security: Key switch to prevent unauthorized use of the system central vacuum engraving cut fume extraction port Kdedjcwpkpspfx Aabju Multifunctional cutting table with low-reflection, removable support elements for laser material processing Optionally available: Laser source and optical system according to application specifications PFEIFER technology linear motor for X/Y axis

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Kdjdpfxsu Dg Uhs Aabou Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,064 nm, table length: 1,500 mm, table width: 3,000 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 8,500 kg, warranty duration: 24 months, space requirement height: 2,400 mm, space requirement length: 8,550 mm, working range: 1,500 mm, Equipment: cooling unit, safety light barrier, XL class = processing area X 1550 mm x Y 3050 mm x Z 150 mm High-precision linear axis system with 6 - 12 KW laser power Double change table system, laser processing at one working height! (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Maximum dimensions (L × W × H (with table 8504) × 2310 × 2400 mm / laser machine 6.5 T + external loading table 2T = 8.5 tons Power supply depends on the laser source (6kW) 400V/50Hz 3 phases / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on the material and process Kdodpfxjr D Nfko Aabju Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W Kdjdpfx Aocuiz Toabju New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control Optional: positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm working area with protective glass! (Extension of the work area optionally to (180, 350 mm) almost maintenance-free

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Kedpfx Aajcuiz Ssbedu Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control

Condition: new, Year of construction: 2025, The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in no time at all, thanks to the optional monitoring camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications and in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-Theta lenses dependent / 3D option) Laser source: IPG (Pulsed Fiber Laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New, optional: software-controlled, variably adjustable working width (X, axis max. 450mm depending on the structure) included in the scope of delivery! Kdjdpfedgfgcjx Aabsu

Year of construction: 2025, condition: new, machine/vehicle number: AB2024, Pclass = working area X 1250mm x Y 1250mm x Z 25mm Kdodpfx Ajdvik Njabju skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals Laser processing simple and high-precision - laser engraving, cutting at high speed and quality

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine - 2050mm x 3050mm x 220mm High precision - milling and drilling with extremely high speed and quality. As a CNC milling machine manufacturer, pfeifer-technology is your partner with skycnc CNC milling machines and engraving machines. Our PFEIFER technology skycnc WK series milling machines with high-precision ball-spindle drive on all axes offer you the highest precision, accuracy and speed - and all this with a pleasant price-performance ratio. Due to the structure with a high solid steel base frame approx. 4 t, a high static rigidity of the machine is achieved, so that the processing of solid wood and different metals is possible without any problems. The sophisticated position and distribution of the 35mm linear rails and guides and the associated massive portal with its vibration-damping properties characterize our CNC milling machines in particular. All machine components and the servo drive units used are the result of years of development and experience. The powerful servo motors are highly effective and backlash-free with the ball screw from German quality production and thus offer a feedback-free drive to meet even the highest demands. Ksdpsbnpgxsfx Aabsdu The superior, freely programmable CNC control enables flexible intervention by means of a touchscreen under all production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this CNC control you can create your milling data or import CAD/CAM data and then process them independently of a computer. The tool changer (up to 16 tools), the all-aluminum vacuum table, various tool/workpiece cooling solutions, the automatic lubrication system for all axes and other ingenious details round off this milling system. With the PFEIFER technology skycnc WK series you get a reliable and powerful large portal milling system for your applications. On request, we can supply the corresponding CAD / CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems or ArtCAM Pro / ArtCAM Insignia software in German / Russian etc. on request. - Drive system: high-precision ball screw on X and Y axis and Z axis from high-precision German production - Working speed: 15 m/min - xyz working area/travel area: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum tracks): 2000 x 3000 x 30 mm - xyz repeat accuracy: 0.02mm - XYZ Accuracy: 0.01mm - Compatible with Software Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Addition: Spindle motor / Tool changer / Vacuum table according to customer requirements - Warranty: 1 year - Spindle power: from 5.5kW (other spindle powers optional) - Spindle speed: 6000 - 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC SERVO motors on all axes - Tool changer: 4-8 magazine places - PDSP control RTU / MTU (Remote Terminal Unit) - Power input: AC400V±10% 50Hz - Power consumption 10-15 kW (depending on equipment) - Dimensions: 4500 (L) X 3100 (W) x 2500 (H) mm - Weight: 4000kg

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series machine - 1250 mm x 1250 mm x 220 mm High precision - milling and drilling with extremely high speed and quality. As CNC Milling machines manufacturer whistler-technology with SkyCNC CNC milling and engraving your partner. Our PFEIFER technology SkyCNC WK series milling machines with high-precision ball screw drive on all axes provide highest precision, accuracy and speed - with a pleasant value for money.   By building a high solid steel base frame ca. 2,2 t high static rigidity of the machine is achieved, so that the processing of solid woods and various metals will be trouble. The sophisticated location and distribution of 35mm linear rails and guides and the associated massive portal with its vibration damping characteristics distinguish our CNC milling machines made especially. The superior programmable CNC control allows flexible intervention via touchscreen in all production conditions and is standard in our PFEIFER technology SkyCNC WK series milling machines. This CNC control, you can create your milling data or CAD / CAM import data and then can be processed independently of a computer.   The tool changer (up to 16 tools), the vacuum table made of solid aluminum, various tool / workpiece cooling solutions, the automatic lubricating device for all axes and other refined details, complete this milling system.   With the PFEIFER technology SkyCNC WK series you get a reliable and efficient bulk - Portal - milling system for your applications.   - Drive system: high-precision ballscrew on X and Y axis and Z axis of high-precision manufacturing - Operating speed: 15 m / min - Xyz Workspace / traverse: 1250 x 1250 x 220 mm Ksdpfx Aae Sd U Dobedu - Table size (vacuum table with milled vacuum tracks): 1220 x 1220 x 30 mm - Xyz Repeatability: 0.03mm - Xyz accuracy: 0.01 mm - Compatible with DIN ISO CAM etc. - Format: ISO standard G-code, FANUC compatible - Additional: Spindle motor / tool changer / Vacuum table according to customer requirements - Warranty: 2 years - Spindle Power: from 5.5kW (other spindle power optional) - Spindle speed: 6000-24000 U / min (depending on requirements) - Spindle taper: BT 30 4ea ER20 (other recordings optional) - Drive: AC SERVO motors on all axes - Tool changer: 6 magazine slots - Power supply: AC400 V ± 10% 50Hz - Power 10-15 kW (depending on equipment) - Dimensions: 2670 (L) X 1735 (W) x 1790 (H) mm - Weight: 2700 kg

Condition: new, Year of construction: 2025, The laser processing center skyCUBE M - the new standard in laser material processing! PFEIFER laser processing center skyCube M Laser machine with 200W CO2 laser available immediately Mclass = machining area X 1250 x Y 650 x Z 300 mm skyCUBE M laser processing center - the new Mclass multifunctional laser engraving machine and laser cutting machine - laser processing simple - high precision - laser engraving, cutting with high speed and quality. Our new and best multifunctional talent not only impresses the most experienced user with its newly thought-out design. This CO2 laser / fiber laser shows its outstanding capabilities as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser in all industrial applications. With an optional laser power of up to 1000W (1kW), the CO2 laser device / fiber laser system can also be used extremely flexibly in your production. skyCUBE laser devices meet all the requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving many materials, such as: various metals, acrylic glass, solid wood, etc. Wood materials, wood composite materials, paper, cardboard, various plastics and Foams, textiles, and much more. The excellent execution of the laser machine 100% produced in Plauen guarantees the laser user from metal construction to the laser source a high level of work accuracy with consistently high quality. With a cutting speed of up to 8000 mm / s and an engraving speed of up to 4000 mm / s, high-quality laser technology produces clean and very sharp cutting edges and precise laser engravings. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. User-friendly and intuitive - the supplied skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to the Windows standard lets you work quickly and effectively. The software is characterized by high system stability, professional monitoring with appropriate machine operation and control as well as compatibility with common file formats. The data is output over levels - separately for each level, including the definition of the sequences and the type of processing. The parameters, such as laser power and processing speed, are automatically saved for each level and can thus be reproduced in a material database at any time. The laser projects are transferred to the skyCUBE M laser processing center with a computer connected via LAN / USB interface. From there these can be processed repeatedly without the PC having to be switched on. A modern touch control panel gives you access to all system information and functions. The skyCUBE M laser processing center at a glance: Ksdpfx Aao Sfanobjdu German industrial standard machine steel construction for the safe and vibration-free mounting of the laser components and axis systems, on rollable industrial leveling feet 8 "touchscreen display simply see more, control more, communicate more with the skyCUBE M laser processing center Redundant safety system - class 1 laser Security: Shutter - ᐳ active mechanical beam path closure

Condition: new, Year of construction: 2025, 2D / 3D laser marker skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications Ksdpfx Ao Sd Ubjabjdu

Condition: new, Year of construction: 2025, skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications The skylaser laser marking / engraving laser at a Glance: Processing Area : from 110 x 110 or 120x120 or 300x300 mm (depending F- Theta lenses / 3D option) Laser: IPG ( pulsed fiber laser , YTTERBIUM PULSED FIBER LASER ) SCANLAB galvanometer Nominal laser power : 20W / 30W / 50W New: Software controlled variably adjustable working width ( X axis max 200mm depending on the design . ) Included! New: Software controlled variably adjustable working height ( Z axis max 400mm depending on the design . ) Included! Optionally, other work areas - Automatic Materialzufuehrung etc. Air cooling as low power consumption Labeling speed: up to 5000 mm / s ( SCANLAB dyn AXIS ® galvanometer to reach 10 SCAN ® cube marking speeds of up to 640 characters per second. ) Redundant safety system Laser Class 1 according to the configuration or Laser class: 2 ( optional pilot through laser ) piper -technology HQ mirrors and optics for perfect results , powered by Scanlab (R ) piper -technology industrial PC with the software pre-installed control New: including Laser Focus Finder New: including process air control Optional : laser positioning : an integrated diode laser for optimal positioning Including new F -theta lens 110 x 110 mm working area with protective glass! ( To extend the working range of optional (120, 180 , 350 mm) Kdsdpfx Aasbv Dayjbou virtually maintenance-free Key Features Let yourself be inspired and please request our product video on your sample production ! Model Mark IPG laser engraving laser skylaser Work size 100 x 100 or 120 x 120 mm (F -theta 160mm ) other optional Laser power 20 / Option: 30/50 W ( air cooled) laser method YTTERBIUM PULSED FIBER LASER Engraving

Condition: new, Year of construction: 2025, You are looking for a real machine and not a toy, then you have come to the right place: Fiber laser laser engraver large format X1130 x Y665 x Z260mm Kdedpfx Aef U Spxjabju Laser markers skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most delicate structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, force-free and without tool wear. The advantages in your application are the geometric flexibility and high processing accuracy. This type of processing can be used regardless of the hardness of the workpiece to be processed. The flexibility of the system increases with the mobile work table that can be adapted to your needs. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLaser Marks provide very precise and permanent markings (laser engravings) and are suitable for the special laser application area metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is effortlessly possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of stamps, engravings, lettering and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in next to no time, thanks to the optional observation camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and, thanks to the IPG laser technology, is almost maintenance-free, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or fiber laser laser engraver large format with integrated axes X1130 x Y665 x Z260mm Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB SCANcube galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working height (Z, axis max. 260mm depending on the structure) Optionally other work areas - automatic material feed, etc. Air cooling because of low energy consumption! Marking speed: up to 5000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCANcube ® achieve marking speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (with optional pilot laser) Pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: including process air control New: including extraction control Optional: Positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm work area with protective glass! Fiber laser laser engraver large format X1130 x Y665 x Z260mm almost maintenance-free

Condition: new, Year of construction: 2025, machine/vehicle number: AB2024, (Laser marking / Laser engravings) and metal and organic materials suitable for special laser applications. The use of a variety of fonts, barcode application, serial numbers, logos and images is effortless. Thanks to the excellent resolution almost all requirements can be met at marking tasks. The software is extremely user-friendly. Even very complex and complicated marking tasks can be easily supplied to the industrial PC to easily create. The exact positioning is done in no time, thanks to the integrated positioning laser. Since the system has little wear and thanks to the fiber laser technology company (IPG Photonics / IPG Laser GmbH) is virtually maintenance-free, it can be used particularly in industrial applications and in continuous use. - Bearbeitungsflaeche: 110x110 or other zBsp. 175x175 mm (F-Theta lenses dependent) Optional - Laser source: IPG Laser alternatively other depending on the application - Laser Power: 20W / 30W Optional / 50W - Software-controlled precision axes worktable (X, Y, Z axis) - Traversing in Z max. 200mm - Marking speed: up to 8000 mm / s - Redundant safety system - Conditioning Laser Class: 1 Ksdpfe Sd Trex Aabsdu - Scanlab SCANcube for perfect results - PFEIFER technology Industrial PC incl preinstalled control software. - Positioning laser: integrated diode laser for optimal positioning - Optional: camera positioning, 3D processing, database connectivity - Virtually maintenance-free