Used Ath W42 for sale (3,724)

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG max. swing diameter over bed 695 mm Standard machining diameter 276 mm bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Djdpfxjzzd Rto Aptekt Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Drilling cycle with torque-dependent chip breaking Engraving function Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Used machine – sold without warranty.

Condition: not inspected (used), Year of construction: 2000, machine/vehicle number: X188C001, Cyclic lathe WAGNER / CHEVALIER FCL - 1840 S Delivery terms: Free on board, truck Location: 74906 Bad Rappenau Collection: The machine must be collected on 07.10.2026. The exact collection time will be arranged with us in advance. Payment terms: Payment in advance – by bank transfer Technical data: Bed width: 356 mm Turning diameter over bed: 460 mm Turning diameter over cross slide: 230 mm Center height: 230 mm Distance between centers: 1,000 mm Spindle speed: 40 – 2,000 rpm Spindle speed stages: 3 stages Spindle speed (low range): 40 – 200 rpm Spindle bore: 58 mm Taper in spindle: MK6 Longitudinal travel Z-axis: 900 mm Transverse travel X-axis: 250 mm Upper slide travel: 152.4 mm Upper slide stroke: 125 mm Size of tool holder: 25 x 25 mm Tailstock: Diameter: 65 mm Travel: 150 mm Taper: MK4 Feed & Accuracy: Feeds: 0 – 5,000 mm/min Rapid traverse X/Z-axis: 5,000 mm/min Positional accuracy: ±0.01 mm Repeatability: ±0.005 mm Spindle runout: 0.007 mm Scope of delivery: Existing manuals as shown in the pictures Three-jaw chuck Drawer cabinet with contents Existing accessories as shown in the pictures Dimensions & Weights: Installation dimensions L x W x H approx.: 2900 x 1700 x 1900 mm Weight approx.: 2300 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►If desired, we can offer transport to the destination. ►The quoted price is net, plus VAT. Dksdpfx Aezx S I Ioptst ►The goods are sold with the exclusion of any warranty. ►Technical data is subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2015, gebraucht 2015 1686 prompt, Zwischenverkauf v England 14800 € 1 330 mm 1000 mm 167 mm 38 mm 210 mm 12 40 - 2500 1/min 16 0.03 - 1 mm/U 0.2 - 14 mm Dkjdpfewiqv Iex Aptet 2 - 56 TPI Gänge/" 190 mm 92 mm 42 mm 3 MK 110 mm 2.2 kW 1940 mm 1000 mm 1550 mm 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. Dodpfx Apjzmqv Hjtskt It was operating 2-4 hours during test run. The whole system is in new state.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,688 h, functionality: fully functional, machine/vehicle number: G3138-0826, turning diameter over cross slide: 375 mm, turning diameter: 590 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 750 mm, controller model: Fanuc 21i-T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle speed max.: 3,000 rpm Turning diameter over bed: 590 mm Turning diameter over slide: 375 mm Distance between centers: 750 mm Spindle bore: 78 mm Travel in X-axis: 220 mm Travel in Z-axis: 750 mm MACHINE DETAILS Dkedjzza Uuopfx Aptjt Control model: Fanuc 21i-T Power: 22 kW Operating hours: 1,688 h Shipping weight: 6,100 kg EQUIPMENT Three-jaw chuck Chip conveyor Turret CE marking

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 215 mm, spindle bore: 41 mm, turning diameter over bed slide: 380 mm, turning length: 1,000 mm, total length: 2,900 mm, total width: 1,050 mm, total height: 1,410 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 30 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, The lathe underwent a general overhaul in 2011 by M-MOOS spol. s.r.o. During the overhaul, it was fitted with an Omron Varispeed 7 frequency converter for convenient speed regulation during operation and to reduce current surges. The lathe's accessories include: a fixed and a movable steady rest, a faceplate, 2 chucks, a clamping angle, a rotating center for the tailstock (Morse 4), a micrometric stop for longitudinal and transverse feed, 1 coolant system with a pump, and an operating manual. Technical parameters: swing over bed 380 mm, swing over carriage 215 mm, distance between centers 1000 mm, bed width 340 mm, spindle bore 41 mm, spindle taper metric 50, tailstock center taper MORSE 4, spindle speed range 30 - 2800 rpm, main DC motor power 10 kW, maximum machine dimensions: length: 2900 mm, width 1050 mm, height 1410 mm, machine weight 2000 kg. The overhauled lathe was used for maintenance purposes by a large manufacturing company. The machine can be tested in our warehouse in Přerov by appointment. Dksdpfx Apezy Shwjtst

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,416 h, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 630 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 3,500 rpm, total height: 1,720 mm, total length: 2,870 mm, total width: 1,675 mm, overall weight: 4,500 kg, chuck outer diameter: 260 mm, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, De Hwacheon Hi-Tech 200BL is een robuuste CNC-draaibank die in de praktijk opvallend eenvoudig in gebruik is. De machine is overzichtelijk opgebouwd en werkt voorspelbaar, waardoor instellen en bedienen snel vertrouwd aanvoelt. Een groot voordeel is de configuratie met alleen een X- en Z-as. Door het ontbreken van extra assen en complexe functies blijft de bediening duidelijk en efficiënt. Deze HWACHEON HI-TECH 200BL machine is standaard voorzien van; Spanentransporteur + opvangbak. Schunk 3-klauw (ROTA NC Plus 260-86) inclusief div. setjes opzetbekken. Originele HWACHEON en FANUC documentatie. Gewicht & afmetingen: Dedpfeyvqw Sex Aptskt 4.500 kg +/- 2870 x 1675 x 1720 mm (LxBxH)

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Design allows for conversion between long and short turning Controlled axes: 9 Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Dsdpfozzahzex Aptokt Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, overall weight: 4,700 kg, TONGTAI TOPPER TNL - 100 / CNC lathe / Fanuc OT control -CE marking -Fanuc OT control -TOOL EYE - tool measurement system -Max. turning diameter 390mm -Max. turning length 580mm -Bar capacity 51mm -Axis travels X / Z 200 & 600mm -Rapid traverse rate X / Z axis 20 & 24 m/min Dkodpfx Apszyz U Tstst -Spindle bore diameter 62mm -Spindle speed range 45 - 4500 rpm -Turret 12 stations -Tool shank 25mm -Tool holder diameter 32mm -Spindle motor 15 KW -Tailstock -Foot switch -Machine feet -Chip conveyor -Complete documentation Dimensions L x W x H 2.6 x 1.8 x 2 meters / Weight 4700 Kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 185 mm, spindle bore: 40 mm, spindle speed (max.): 2,800 rpm, total height: 1,290 mm, total length: 1,850 mm, total width: 880 mm, turning diameter over bed slide: 330 mm, type of input current: three-phase, overall weight: 1,150 kg, spindle mount: MK 5, Conventional lathe, Weiler, in good condition! Year of manufacture: 1996 Dksdpfszx Uqlex Aptst Includes collet chuck!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 11.176, center height: 250 mm, overall weight: 280 kg, spindle speed (max.): 3,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 250 mm Center distance: 1,600 mm Spindle speed: 400–3,000 rpm MACHINE DETAILS Connected load: 3 kW Voltage: 400 V Fuse rating: 16 A Dimensions & Weight Dimensions (L × W × H): 2,460 × 440 × 1,220 mm Dkedpfx Aszzbc Heptet Dry weight: 280 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: like new (used), Year of construction: 2023, functionality: fully functional, CNC Siemens 828 D Year: 2023 • Max. diameter: 400 mm • Max. workpiece length: 550 mm • Axis travel: X-axis: 240 mm Dkedpsy Nzc Ejfx Aptet Z-axis: 600 mm Y-axis: +/- 60 mm Sauter 12-position BMT turret counter-spindle bar feeder complete specifications in PDF file

Condition: used, functionality: fully functional, spindle bore: 35 mm, well-maintained conventional lathe. Dkodjzzdnlspfx Aptst

Condition: good (used), Year of construction: 2012, operating hours: 22,156 h, functionality: fully functional, machine/vehicle number: 5011358, turning length: 850 mm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, total height: 2,200 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8 i, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power: 36 kW (48.95 HP), Equipment: chip conveyor, TRAUB TNA 400 CNC turning machine - includes powered tool stations as well as Y and C axes Dedpfszxx Hwex Aptskt - includes chip conveyor FCA D-63843 Niedernberg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, Machine in production, can be inspected. Machine is running without any defects. Machine is equipped with: - bar feeder FMB - swarf conveyour - increased pressure pump - 2x spindle - front and back drilling tools Dodpfx Ajzx Arqeptjkt - live tooles for milling - part coveyour belt - signal lamp

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes C-axis speed range: 0–20 rpm Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Dodpfozwmztex Aptekt Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 500 mm, turning diameter: 400 mm, spindle bore: 77 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 380 mm, travel distance Z-axis: 510 mm, total height: 1,800 mm, total length: 3,700 mm, total width: 1,800 mm, type of input current: AC, overall weight: 4,380 kg, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Quick Turn Nexus 250 in good condition Year of manufacture: 2004 Mazatrol 640 Max. turning diameter 400 mm X-axis 380 mm Z-axis 510 mm Spindle bore 77 mm Spindle speed 4000 rpm Spindle power 26 kW Tool changer 12 Dimensions (estimated) Length 3700 mm Dkodpfxozw H A Dj Aptst Width 1800 mm Height 1800 mm Weight 4350 kg

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 4,946 h, functionality: not functional, machine/vehicle number: 2406.03, turning diameter over cross slide: 150 mm, turning length: 625 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 4,000 rpm, total length: 1,650 mm, total width: 1,450 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 2,200 kg, spindle diameter: 320 mm, distance between centers: 750 mm, Universal lathe with cycle control from DMT - CD 322 The power supply unit for the drives is defective. In addition, the turret is damaged and has been removed from the machine parameters. This will be included. Therefore, after the power supply unit has been repaired, the machine can be operated without the turret. Djdpfjzwpq Dsx Aptekt However, due to the age of the machine, the guideways also exhibit corresponding play. Therefore, the machine is sold expressly as defective, for repair or as a source of spare parts, with the exclusion of any warranty regarding functionality.

Condition: excellent (used), Year of construction: 2019, operating hours: 5,045 h, functionality: fully functional, machine/vehicle number: 3116946, turning diameter over cross slide: 279 mm, turning length: 406 mm, turning diameter: 279 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 406 mm, spindle motor power: 15 W, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, total height: 2,167 mm, total length: 3,395 mm, total width: 1,612 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 3,583 kg, type of input current: three-phase, overall weight: 3,583 kg, spindle nose: -, Equipment: documentation/manual, Used turning center for sale – CNC lathe with Y-axis and driven tools, in very good condition. Contact us for further details. Model: HAAS ST-15Y Year of manufacture: 2019 Djdpfx Aezr E H Djptjkt Maximum turning diameter: 305 mm Reblezr E H Djvzwyrecf Maximum turning length: 406 mm Y-axis travel: 102 mm Bar capacity: 64 mm Chuck size: 8 inches Maximum spindle speed: 4000 rpm Number of controlled axes: 4 Spindle motor power: 14.9 kW Tool size: BOT 6/12 VDI40 Controls: HAAS 2019 Voltage: 440V AC Weight: 3583 kg Dimensions (L x W x H): 3030 x 1550 x 1810 mm Additional Equipment: VPS Programming System, Hydraulic Tailstock, HAAS Auto-door, Chip conveyor, 6000 rpm Live Tools Resale capability included. The center is in very good condition. It is currently in continuous operation and connected to power. The machine operated in one shift.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 00320002700, spindle bore: 91 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, total height: 2,500 mm, total length: 6,000 mm, total width: 2,200 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 99 A, workpiece length (max.): 1,225 mm, nominal power (apparent): 65 kVA, workpiece diameter (max.): 480 mm, workpiece weight between centers: 500 g, operating hours of spindle: 1,103 h, Equipment: chip conveyor, documentation/manual, DMG MORI CLX 550 CNC lathe - Bed inclination: 45° - Bed diameter: 700 mm - Max. slide diameter V1 to V3: 500 mm - Max. workpiece diameter: 480 mm, in the front workpiece diameter: 320 mm - Distance between centers: 1450 mm - Y-axis travel: 120 mm (+- 60 mm) - Z3-axis travel: 1200 mm - Spindle height from axis to ground: 1043 mm - Main spindle, bar capacity: 80 mm - Bar diameter: 81 mm - Front bearing diameter: 130 mm - Resolution axis C1: 0.001° - The machine has a tailstock Djdpfxszxy R Re Aptokt - Distance between two spindle centers: 1495 mm - Z1 axis travel: 1200 mm - Max. workpiece length: 1140 mm - Max. workpiece diameter: 450 mm - Bar capacity of the tailstock: 50 mm - Bore diameter of the tailstock: 73 mm - Bar diameter: 52 mm The machine is equipped with a tailstock (fitted with a three-jaw chuck SMW AUTOBLOK, diameter: 210 mm), as well as a 12-position tool turret, including powered tool stations, and an SMW AUTOBLOK three-jaw chuck, diameter: 250 mm. It also includes a chip conveyor, filter extraction, and documentation and CDs. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: good (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: HK06, spindle bore: 48 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, overall weight: 800 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 7 A, WEILER PRAKTIKANT GS Lead and Feed Spindle Lathe - Connection: 5.5 kVA - Distance between centers: approx. 700 mm - Center height above bed: 160 mm - Turning diameter above bed: 320 mm - Center height above cross slide: approx. 100 mm - Turning diameter above cross slide: approx. 200 mm Djdpozxzmyjfx Aptokt The machine is equipped with a tailstock, a Multifix tool holder, and a quick-change chuck, including a three-axis digital display from the manufacturer FAGOR. FCA D-72589 Westerheim - loaded onto a truck.

Condition: used, Year of construction: 1989, functionality: fully functional, We offer this TOS Trenčín SUI 50 CNC lead/draw spindle lathe with the following specifications: Dkjdpezy Efpjfx Aptst Manufacturer: TOS Trenčín Model: SUI 50 CNC Condition: Used Category ID: 1519 Type ID: 2086 Machine type: Lead/draw spindle lathe The machine can be switched on, and the display lights up without any error messages. The chuck can be activated. Apart from the emergency stop switch on the machine (see pictures), no defects can be identified. The machine was in operation until early 2025. The machine comes from an insolvency proceeding and is now for sale. The tools that are in the machine will remain in it. A complete operating manual and wiring diagrams are available. The machine is currently still connected and can be inspected and tested. Transport should be arranged by the customer if possible. Loading with an overhead crane is possible. The buyer is responsible for securing the machine for transport. If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2018, TSUGAMI M08SY-II CNC lathe Fanuc OiTD with Manual Guide 2 x C-axis powered tools Axis travels: X: 221 mm Z: 400 mm A: 506 mm Y: ±50 mm Main spindle max 4,500 rpm A2-6 7.5/11 kW (10/14.8 hp) Counter spindle max 4500 rpm 5.5/7.5 kW (7.4/10 hp) Dkodpfx Aezy Hm Ujptjt Max turning diameter 280 mm Max turning length 380 mm 12-station turret Chuck 210 mm Spindle bore 65 mm Parts catcher LNS chip conveyor Documentation Tool holders

Condition: used, Year of construction: 2001, functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, feed length X-axis: 240 mm, feed length Z-axis: 580 mm, overall weight: 4,100 kg, CNC Turning Machine, 1-Turret Manufacturer: Daewoo / Doosan Model: Puma 230A Year of Manufacture: 2001 Serial Number: XXXX Control System: Fanuc 18-T Operating Hours: Unknown Technical Specifications: ----- - Turret: 12 stations, BMT - Spindle Speed: 6,000 rpm max. - Bar Capacity: Ø 45 mm Dkjdpfx Apszzd I Setot - X-axis Travel: 240 mm - Z-axis Travel: 580 mm - Hydraulic steady rest (following type) - Chip conveyor - Tool measurement system - Machine Weight: 4.2 t - Loading onto a truck is included in the price Accessories: ----- - Documentation - 2x Foot switches - 1x 3-jaw chuck - 1x Collet chuck, Hainbuch - Tool holder set

Condition: good (used), Year of construction: 2007, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading Dksdpozzc T Hofx Aptjt - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.