Used Ath W42 for sale (3,590)

Condition: ready for operation (used), Mathias Bauerle Folder Plate CAS 38 in very good condition Csdpfx Ajwwkfrea Nsgt 6 units available

Condition: good (used), Year of construction: 2009, functionality: fully functional, The machine is fully operational and equipped with an MB CAS AM52 delivery table (short). In continuous use. Cgodsxcwb Uspfx Aa Nst

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) Cgedpfx Aaex I A Hcj Nst • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: new, EVA Hotmelt Without Filler 280.30/31 Application Examples: Edge Banding For bonding thermoplastic edge bands (such as ABS, PP, PVC), resin-impregnated decorative paper, veneer edge bands (with or without nonwoven backing), and solid wood edges. As a general rule, the bonding properties and the substrates’ surfaces to be glued (including back-side primers or other surface treatments) must be checked on an application-specific basis prior to use. Csdpjx Sqnvsfx Aa Nogt Processing Instructions: Automatic feed systems can be used for processing the adhesive granulate. The ambient temperature should not exceed 30°C. Depending on formulation, different types of hotmelt adhesives may be incompatible with each other. Therefore, we recommend thoroughly cleaning application equipment when changing products. Further information is available upon request. Processing characteristics may vary depending on the application technology used and variations in feed speed, which can affect the bonding process. Customer trials are required! Typical Technical Data: Processing temperature [°C]: 180 – 200 Feed rate [m/min]: 10 – 40 Appearance: Terminal digit 0 = yellow opaque Terminal digit 1 = white Density at 20°C [g/cm³]: approx. 1.03 ± 0.03 Softening range [°C]: approx. 90 ± 5 (Kofler heating bench) Viscosity at 190°C [mPas]: approx. 66,000 ± 10,000 Heat resistance [°C]: approx. 80 ± 5 Open time at 190°C [s]*: approx. 6 ± 2 Setting time: not applicable * measured on a 200 µm film Technical data determined according to Jowat test methods

Condition: used, Year of construction: 2005, No. 3256 CNC machine for pallet production Sysmathick RPA9 + stacker Codpfox Dddxex Aa Njgt Used, year of construction 2005, machine already dismantled Machine for assembling wooden parts with top and bottom nailing The RPA9 is a machine with circulation chains for the production of pallets in standard dimensions according to four templates (maximum 1600 x 1400 mm LW) Operation via a touchscreen Format changeover within a few minutes Two programming methods: - digital programming via PC (input of coordinates) - Manual programming via touch screen Storage of tens of thousands of products Automatic control of the distance between the heads (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top 3x N58 & 3x N400, bottom 3x N80) High nailing frequency (one row of three nails per second) Nailing of multi-level pallets thanks to the heads Equipped with pneumatic cylinders Pneumatic pressing of the boards during assembly Minimum pallet dimensions 600 x 300 mm LW Maximum pallet dimensions 1600 x 1400 mm LW Maximum template dimensions 1700 x 1600 mm LW Maximum nailing capacity 1600 x 1400 mm LW Maximum pallet height 190 mm Minimum pallet height 110 mm Machine capacity 60 - 200 pallets/hour Sale on behalf of customer, ex location near 51371 Leverkusen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), functionality: fully functional, Good working condition. Please check out our other listings as well. Csdpfxeu Tkbbj Aa Njgt

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: M0335, Cyril Bath type 20 T Hydraulic Swing Arm Profile Stretch Forming Machine year 1997 serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V Cedpjqcu Acefx Aa Nsgt description With control Cyril Bath Monitor Type: Flexscan 685 12 CNC axes 4 auxiliary axes Stretching force 20–200 kn Bending angle 2 x 95 degrees Rotation stretching cylinder 2x –45/225 degrees Component length from 762 to max 3810 mm Hydraulics from Rexroth with 2 x hydraulic pumps: 45 kW each Various spares available

Condition: used, SCOPE OF SUPPLY: - Uncoiler - Introduction and Pre-Straightening Group - Leveller - Looping Table for Automatic Cutting - Cross-Cut Shear - Measuring Table Codpfx Aasymcf Ue Nogt - Exit and Stacking Roller Table Coil weight: 5 Tn Coil width: 650 mm Thickness: 0.3 - 2.5 mm Coil external diameter: Max. 1500 mm Mandrel diameter: 480 - 520 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Forklift Battery 24V 3PzB300 Battery 85% TESTED Year of Manufacture: 2020 Weight 250kg Dimensions 650mm x 195mm x 670mm Special trough for Toyota - can be converted to another trough Cgsdpfx Aaswkhamj Net Battery has been serviced and tested by a specialist company. Capacity test (C5 discharge test) 255/300 Ah battery Remaining capacity: 85% With Aquamatik filling system (BFS) With terminal screws but WITHOUT end connection

Condition: excellent (used), Year of construction: 2023, Immersion cooler Deltatherm E 4 Suitable for cooling: oil – emulsion – water Cgedpfx Asx Rrn Ija Net Temperature range: 10–40 °C Several units available

Year of construction: 2007, condition: good (used), Filtration unit consists of: water tank, gravel filter, pressure pump, activated carbon filter. System for insulating glass production line. Width: 2000 mm / water tank 2100 mm. Height: 2200 mm / water tank 1700 mm. Cgjdpfx Aew I Hgroa Nst Depth: 600 mm / water tank 750 mm. Weight: approx. 250 kg / water tank: approx. 100 kg.

Condition: good (used), Year of construction: 1998, functionality: fully functional, conveyor belt length: 2,200 mm, conveyor belt width: 120 mm, total length: 2,200 mm, total width: 170 mm, total height: 1,040 mm, power: 0.09 kW (0.12 HP), motor manufacturer: BAUKNECHT, TAF article number: 1000003869 Manufacturer: SPÄHT Year of construction: 1998 Overall dimensions: 2,200 x 170 x 1,040 mm (LxWxH) Width incl. cheek: 125 mm Side panel height: 40 mm Width incl. drive: 170 mm Conveyor length: 2,200 mm Conveyor width: 120 mm Belt type: PVC, smooth Belt width: 80 mm Substructure: included Cgodpfxor Drxtj Aa Net Drive: Head drive Motor: Gear motor Motor data: BAUKNECHT, 0.09 kw, 50 Hz, 400 Volt Conveying speed: infinitely variable, max. 0.011 m/s Special features: Frequency converter, lateral guidance Condition: Used / fully functional Function test: OK

Condition: good (used), Year of construction: 1981, functionality: fully functional, conveyor belt length: 6,100 mm, conveyor belt width: 600 mm, conveyor belt speed: 100 mm/s, total length: 6,100 mm, total width: 740 mm, total height: 340 mm, power: 0.25 kW (0.34 HP), input frequency: 50 Hz, Type: Conveyor belt Cgsdpfxetphc Rj Aa Njt TAF article number: 1000003874 Manufacturer: SPÄTH Year of construction: 1981 Overall dimensions: 6,100 x 740 x 340 mm (LxWxH) Width incl. side panel: 710 mm Cheek height: 100 mm Width incl. drive: 740 mm Conveyor length: 6,100 mm Conveyor width: 600 mm Belt type: PVC, smooth Belt width: 600 mm Substructure: excl. drive Drive: Centre station Motor: Gear motor Motor data: ATB, 0.25 kw, 50 Hz, 400-230 Volt Conveying speed: 0.03 - 0.1 m/s, adjustable Special features: Speed controller, CEE plug, ON/OFF switch Condition: Used / fully functional Function test: OK

Condition: good (used), Year of construction: 1993, functionality: fully functional, conveyor belt length: 3,020 mm, conveyor belt width: 600 mm, conveyor belt speed: 80 mm/s, total length: 3,020 mm, total width: 800 mm, total height: 960 mm, Type: Conveyor belt TAF article number: 1000003876 Cedpfx Aastphg Ij Negt Manufacturer: SPÄTH Year of construction: 1993 Overall dimensions: 3,020 x 800 x 960 mm (LxWxH) Width incl. side panel: 670 mm Cheek height: 100 mm Width incl. drive: 800 mm Conveyor length: 3,020 mm Conveyor width: 600 mm Belt type: PVC, smooth Belt width: 600 mm Substructure: incl. (H: 960 mm) Drive: Centre station Motor: Gear motor Conveyor speed: max. 0.08 m/s Special features: ON/OFF switch, adjustable running direction Condition: Used / fully functional Function test: OK

Condition: used, empty load weight: 2,290 kg, maximum load weight: 3,710 kg, overall weight: 6,000 kg, axle configuration: 2 axles, first registration: 05/1988, suspension: other, tire size: 10.5-20, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, underrun protection, front support. Body: Asphalt cooker approx. 4000 l, tandem trailer with Hatz engine, 2x BPW axles, drum brakes, torsion bar suspension! The trailer was registered as a self-propelled work machine with a green license plate! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors! Cjdpfx Ajq T Syzea Njgt

Condition: used, empty load weight: 2,070 kg, maximum load weight: 3,930 kg, overall weight: 6,000 kg, axle configuration: 2 axles, first registration: 06/1983, suspension: other, tire size: 10.5-20, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, underride protection, front support. Construction: Asphalt cooker approx. 4000 l tandem trailer with single-cylinder engine, 2 x BPW axles, drum brakes, torsion bar suspension! The trailer was registered as a self-propelled work machine with a green license plate! Cjdolaflbepfx Aa Njgt ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, workpiece length:310 mm work piece width:150 mm workpiece height:210 mm spindle speed max.:2800 U/min distance grinding wheel - table:280 mm magnetic clamping plate: magnetic:300 x 150 x 70 mm spindle throat:250 mm Column-Diameter:130 mm Cgjdpecxxlrefx Aa Not total power requirement:1,9 kW weight of the machine ca.:0,58 t dimensions of the machine ca.:0,62 x 0,72 x 1,80 m

Condition: excellent (used), Tatham Twin shaft paddle mixer Serial: CO1040 Stainless, 1200Kg twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base Codpfx Aowfh Imja Nsgt

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) Cedpfx Aec Ipc Uea Njgt → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm Cgjdpfepbbc Hjx Aa Not - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → robust machine housing made of cast iron → automatic loading and unloading of the test force → automatic change between lens and indenter body → LED illumination → digital measuring eyepiece → LCD color display touch screen → conversion to other hardness scales (e.g. HRC/HB) → easy operation Technical data: Cedoc Ipckjpfx Aa Negt → test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000). → Vickers testing method → cross table 110 x 110 mm / travel 25 x 25mm → eyepiece 10X → automatic obejctive turret → objectives 10X / 40X / 60X → max. specimen height 90mm → max. specimen depth 110mm → conformity: DIN EN ISO 6507 / ASTM E-384 → weight approx. 50kg → power supply 230V / 50Hz Scope of delivery: → hardness tester → diamond indenter 136° → Cross table 110 x 110mm → Eyepiece 10X → revolving nosepiece → Objectives 10X / 40X / 60X → LED illumination → Power cord → Accessories case → Instruction manual OPTIONAL → VMS3 software (video measurement system) → Digital micrometer (for transferring the edge distance into the VMS software) → Module "automatic measuring" (only in connection with VMS3 software) → PC system / monitor

Condition: like new (used), functionality: fully functional, Year of construction: 2023, - Automatic hot mounting press - Product details: - corrosion-resistant table model with automatic hydraulic hot mounting - electro-hydraulic automatic system - 7-inch user-friendly LCD touchscreen system - Preset programming and data storage parameters (up to 100 memory locations) - Setting of heating time, cooling time, assembly temperature, pressure build-up and cycle start via the LCD touchscreen - Cooling process - slow cooling, medium cooling and fast cooling mechanism. - Easy replacement of the mold assemblies Cgsdpst Dvyfjfx Aa Nst - Sliding locking mechanism - Automatic water cooling system - Timer buzzer display for heating and cooling cycles - Possible sizes: 1 inch, 1 ½ inch, 2 inch, 30 mm, 40 mm and 50 mm - Power supply: 230 V / 50 Hz - Machine color: 3-Rath design (grey/red)

Year of construction: 2020, condition: excellent (used), overall weight: 255 kg, conveying length: 1,300 mm, transport width: 450 mm, transport height: 950 mm, Plate heat exchanger by VAHTERUS, model PSHE 3HH-242/1/1, insulated. Year 2020. Connections: Lateral DN50, DN65. Top DN150. Bottom DN50. Cgsdpsxnypfjfx Aa Not

Condition: used, TECHNICAL DETAILS - grinding diameter : 0.1 – 10 [mm] - total length : 10 [mm] - working stroke : 0-10 [mm] - working grinding wheel dimensions : 150 x 50 x 50 [mm] - driving grinding wheel dimensions : 100 x 50 x 40 [mm] - driving grinding wheel diameter : 100 [mm] - working grinding wheel speed : 4500 [Rpm] - driving grinding wheel speed : 20-50 [Rpm] - power : 6 [kW] - min. pressure : 5.6 [bar] - dimensions : 1300 x 1100 [mm] - weight : 700 [kg] Csdpfx Ajuhb N Ssa Nsgt

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Cgsdpfx Aoir E E Eoa Not Incl. Sampling unit specicon