Used Attachment Gluing Machine for sale (68,581)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Nordson Asymtek Axiom X-1020 fluid dispensing system: Itedpfxszundko Alxek Positioning & Accuracy * Drive System: Linear encoded X-Y drive system with a closed-loop control circuit. * Accuracy: High precision up to ± 0.050 mm. * Sensors: Equipped with sealed glass linear encoders for accurate position measurement. [1, 2] Dispensing & Valve Options * Valve Compatibility: Suitable for advanced dispensing heads such as the DJ-9000 / DJ-9500 DispenseJet (for non-contact jetting) and the DP-3000 or DV-7000 Heli-flow pumps. [2, 3, 4] * Process Control: Patented Mass Flow Control (MFC) and Calibrated Process Jetting (CPJ™) modules for automatic weight measurement and fluid flow adjustment. [5, 6] * Applications: Optimal for flip-chip & CSP underfill, dam-and-fill, die-attach, and thermal paste applications. [2] Electrical & Pneumatic * Power Supply: 180–260 VAC (adaptive for 200–240 VAC), single-phase, 30A, 50/60 Hz. * Air Pressure: Requires a minimum of 6.2 bar (90 psi) stable compressed air supply. * Heating: Integrated substrate heating (pre-dispense, dispense, and post-dispense stations) for a stable thermal environment. [5, 6, 7] Dimensions & Weight * Machine Weight: Approximately 435 to 490 kg, depending on the exact internal configuration. * Certifications: Complies with international industry standards such as CE, SEMI-S2, SEMI-S8, and SMEMA. [5, 7]

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Isdpfxezux R Ie Alxstk Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: excellent (used), Year of construction: 2019, operating hours: 21,500 h, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece length (max.): 470 mm, workpiece width (max.): 400 mm, workpiece weight (max.): 500 kg, total height: 2,431 mm, total length: 2,069 mm, total width: 2,328 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 9,500 h, distance table to spindle center: 495 mm, spindle motor power: 13,000 W, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Milling spindle HVC140 HSK-E40 - Milling power S1/S6 40%: 10kW/13kW. Ceramic ball bearings with minimum oil air lubrication. Tool Changer 16 positions for HSK40E (tools until diam. 16 mm and maximum length of 75 mm. Tool measurement with Blum laser (annex on the left) with lasersystemm including tool breakage control. For measurment rotating tools of dia. 0,2 mm by dia. 16mm in the machine. Minimum tool length 45 mm. Tool presenting lapse. Preparation for graphite- extraction L-CUT for vacuum extraction system, consisting of enclosure, roof and pipe union. Graphite extration system. Included preparation for graphite extraction. Air throughput rate approx. 1400 m3/h. Motor output 2,2 kW, noise level approx. 73 dB (A). Rest dust content in exhaus air= max. 0,5 mg/m3. Dust contents are 15 times lower than the MAK values. Sound absorber fo L-CUT. Reducing of acoustic pressure level for approx. 9 dB (A) Remote control Heidenhain. Manual control with setup functions, electric hand wheel and enable button. Cooling system Hydac for spindle. Automatic lubrication system. Additional LED workroom lamp. Oil mist lubrication unit. Language English (system) Infrared probe Renishaw OMP 400 HSK 40 The machine will be disconnected and dismantled on 16 September 2026. Until then, it will remain connected and in active production. In July 2026, the ball screws, including the bearings, were replaced on the X and Y axes. All spindle filters and oil were also replaced. Our company is an authorized Exeron dealer and service partner. Therefore, the machine will be professionally disconnected and prepared for transport. Ijdpfozpybwsx Alxstk The price also includes professional loading onto the truck and securing the machine on the truck for transport. The machine dimensions do not include the graphite extraction system. The complete layout is provided in the attached document.

Condition: used, Machining area: - in the X direction without gluing 6000 mm - in the X direction with gluing 5000 mm - in the Y direction 1200 mm - in the Y direction with main spindle + center distance 20 mm 1300 mm max. workpiece height above - top edge of suction plate Z1 100 mm - max. workpiece thickness Z2, dependent on equipment/application Work table height: approx. 950 mm 1 main spindle with pneumatic feed stroke - drive power: 12 kW in S-1 operation - tool holder: HSK F63, taper diameter = 38 mm - tool change: automatic - change force: 11000 N - tool weight: max. 6 kg - direction of rotation: clockwise/counterclockwise, programmable - speed range: continuously variable 1500 - 24000 rpm, programmable - drive: frequency-controlled three-phase motor - spindle lubrication: single grease lubrication - spindle cooling: water cooling 1 CNC axis rotating 360 degrees 1 vertical drilling unit S21 Machine table consists of: - 6 support arms adjustable in the X direction, each with a rear and center stop, all stops controlled by the program - 6 sets of suction plates consisting of a total of - 6 suction plates 114 x 159 x 100 mm - 6 suction plates 125 x 75 x 100 mm - The support arms and suction plates can be individually positioned according to the corresponding workpiece size. Changeover area: - without pendulum machining, without gluing: X = 2 x 2900 mm - free space in the middle: X = 200 mm - without pendulum machining, with gluing: X = 2 x 2150 mm - free space in the middle: X = 700 mm - with pendulum machining, without gluing: X = 2 x 2400 mm - free space in the middle: X = 1200 mm - with pendulum machining, with gluing: X = 2 x 1700 mm - free space in the middle: X = 1600 mm Feed drive system Rapid traverse rates: - X-axis 100 m/min Ijdozupibjpfx Alxjtk - Z-axis 25 m/min Air pressure: 6 bar Tool changer magazine with 18 positions Tool coding: position-coded Tool weight: max. 6 kg Tool length: max. 150 mm Tool diameter: max. 100 mm when fully loaded max. 150 mm with free adjacent positions or nesting Central connection for extraction Mains voltage: 3/N/PE, 400/230 V, 50 Hz 1 vacuum pump 100 m3/h

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Iodpfxoyaywhs Alxstk Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2026, Machine characteristics Ergonomic and efficient design Ijdpfxszp E Hrj Alxetk The CORMAK SZLIFMASTER-E is a modern machine designed for deburring, grinding and polishing sheet metal. The mobile head with two tool mounts allows simultaneous use of two different brush types, significantly improving processing efficiency. The adjustable arm enables control over pressure force, optimising performance and speed compared with manual operations. Advanced functions for maximum precision The machine is equipped with an adjustable spindle speed from 0 to 2,500 rpm, allowing full adaptation to different materials. The vacuum system ensures stable fixing of components, improving both precision and operator safety. Head operation is controlled through the swing arm, enabling smooth and effortless work. The head can rotate 180°, allowing the operator to quickly switch between tools — ideal for alternating between different brushes or polishing attachments as required. Fast and easy processing of various components The machine enables accurate processing of parts with different shapes and material thicknesses. Quick and reliable vacuum clamping ensures fast setup and secure workpiece holding during operation. Magnetic table with remote control – comfort and precision The machine features a magnetic table with adjustable clamping force for stable workpiece holding. The included remote control allows precise regulation of magnetic strength depending on part size and thickness. This gives the operator full control over the clamping force, ensuring high performance and safety. Technical parameters Table dimensions: 1,025 × 825 mm Maximum workpiece size: 1,000 × 800 mm Workpiece thickness: 0.5 – 200 mm Spindle speed range: 0 – 2,500 rpm Number of tools (discs): 2 Extraction capacity: 1,400 m³/h Magnetic table area: 180 × 300 mm Vacuum table area: 350 × 350 mm Arm reach: 1,300 mm Head rotation: 180° Head motor power: 0.75 kW Vacuum motor power: 1.1 kW Total power: 4 kW Machine dimensions: 1,200 × 825 × 1,400 mm Weight: 200 kg Thanks to its ergonomic design, advanced features and magnetic table with remote control, the CORMAK SZLIFMASTER-E is the perfect professional solution for sheet-metal finishing, increasing both efficiency and operator comfort. PLEASE NOTE!!! This machine is a returned item; it is second-hand but in working order. NO WARRANTY!!!

Condition: used, functionality: fully functional, Gluing frame for clamping and gluing wooden components, panels, frames, and laminated timber. Practical workshop equipment for carpentry, furniture making, and training areas. Key technical data: - Machine type: Gluing frame / gluing stand - Application: Gluing and fixing workpieces during curing Iedpfx Aszupgtelxotk - Suitable for: Frames, panels, laminated timber, and larger wooden components - Function: Even clamping and organized placement of glued components - Design: Robust workshop equipment for regular gluing operations - Useful accessory for businesses with regular furniture, frame, or panel production - Supports space-saving organization of gluing operations - Practical addition for carpentry shops, training workshops, and woodworking shops No warranty

Condition: good (used), Year of construction: 2005, HURCO vertical machining center with 4th axis, including: 16.000 RPM SK40 (BIG-PLUS) spindle HYDAC cooling unit High-Pressure Through-Spindle Coolant System Tool Length Measurement and Workpiece Position Detection with two Renishaw probing systems CNC-Controlled Rotary Table MR320 Itedpfx Alozt R Ivexek X-axis Travel 1270 mm Y-axis Travel 650 mm Z-axis Travel 610 mm Max spindle speed 16000 rpm Full technical specifications in the attached document. Viewing of the machine in operation is possible upon appointment. Availability: 12/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Ijbtt Shev Avvuedfjar Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Itsdpfowdidmsx Alxjk Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: new, Year of construction: 2025, Various glue tanks for edge banding and squaring edge banding machines. Itodpsf Tc Rqofx Alxok We supply new glue tanks or overhaul your used one. We also sell single spare parts. Scm, Stefani, Idm, Ima, Biesse

Year of construction: 2019, condition: like new (used), ETIKETT LABELLING MACHINE FOR SELF-ADHELSIVE LABELS YOM 2019 NEW CONDITION WAS USED FOR STICKING LABELS WITH NECESSARY DESCRIPTION ON TETRA PAK PACKAGES Ijdpfxeyynlze Alxjtk STILL IN PRODUCTION TILL MAY 15TH

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, Itsdpfx Aeq R Tnzslxok swarf auger.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Itjdezuyhnopfx Alxsk Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor Itjdpszuyqisfx Alxjk - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable Itsdezuw Rtopfx Alxok 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: good (used), Year of construction: 2019, 400mm swing, 220mm max turning diameter, 510mm cutting length, Siemens 828 Control, Itedoyyaq Nepfx Alxjk 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4500rpm, 3 jaw chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor,

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09020018, input voltage: 230 V, pneumatic connection: 5.5 bar, Description: For sale is a VIBEMAC 3022 WB 406-1CS industrial waistband sewing machine, offered as a complete workstation. This Italian-built unit is specifically designed for high-precision waistband attachment and reinforced seam operations in denim, trousers, and workwear production. The machine produces strong and consistent chainstitch seams and is widely used in professional garment manufacturing environments. The unit has been in production use and was fully operational until factory shutdown. The machine has been video recorded in full working condition on 01.04.2026. VIBEMAC machines are known for their durability, precision, and long operational lifespan, making them a preferred choice in denim production. Key features: • Automatic waistband sewing system Iodey Ipnaopfx Alxetk • Chainstitch seam for strong and flexible stitching • Suitable for heavy fabrics (denim, workwear) • Consistent seam quality and high repeatability • Designed for continuous industrial use • Integrated feeding system for stable material handling Includes: • VIBEMAC 3022 WB 406-1CS sewing machine head • Integrated motor and drive system • Industrial worktable and steel stand • Foot pedal control • Thread stand and guides • Integrated control panel Technical details: • Manufacturer: VIBEMAC S.p.A., Italy • Model: 3022 WB 406-1CS • Year: 2009 • Stitch type: Chainstitch • Needle system: 62x57 F120 • Power: 220 / 380V Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (01.04.2026) • Recently serviced (27.02.2026) • Typical signs of use from production environment • Sold as-is, where-is, without warranty Typical applications: • Waistband attachment (jeans, trousers) • Reinforced seams • Heavy-duty garment production Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Automatic knotting machine, year 1995, in excellent condition. The Interholz Raimann A 10 is an automatic knotting machine for wood (a knot removal machine) used for precisely cutting out defective knots and filling the resulting voids with wooden inserts (patches). Detailed historical and technical information can be found in the Wood Tec Pedia database by Höchsmann, and documentation and diagrams can be found in the Mar-masz online store. Main technical data: Purpose: Cutting out knots and gluing in repair dowels in solid wood. Dimensions of the work table: Approx. 640 x 470 mm. Drill/knotter diameter: Standard range of 25–35 mm (depending on the installed accessories). Power supply: 380V (three-phase). Application in production: Isdpfx Aljzphg Usxstk Furniture and flooring: Allows for aesthetically pleasing repair of visible wooden elements. Raw material recovery: Increases the value of the material by removing defects instead of rejecting the entire piece.

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Itedpozuyh Ujfx Alxok Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Itedpfx Alst Ity Doxsk Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal Itjdowk Rlxspfx Alxek machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, Year of construction: 2019, machine/vehicle number: 28, functionality: fully functional, operating hours: 3,964 h, input voltage: 380 V, type of input current: three-phase, number of slots in tool magazine: 21, total height: 2,500 mm, total length: 8,000 mm, total width: 4,000 mm, table length: 3,600 mm, table width: 800 mm, Machine offered on behalf of a customer – request the brochure with images & videos and the seller’s contact information. THIBAUT Edge processing center T658, manufactured in 2019, #029 • Toothed / drive belt new, to be replaced in 08/2026 • Grinding, polishing, and satin finishing of: - Straight edges up to 40 cm high - Profiled edges - Curved edges with rollers • Automatic tool changer with ISO 40 mount and pneumatic clamping force • Tool magazine with 21 slots • Operation via touchscreen • Automatic detection of workpiece position and thickness for a maximum of 5 workpieces • Table dimensions 3.60 x 0.80 m with consoles for rotary and lifting table for aligning the workpieces, table with new rubber coating • 4 rows of all-round rollers, height-adjustable • 6 pneumatic cylinders for clamping the workpieces • 4 clamping holders for locking the workpieces • Space requirement approx. 8.0 x 4.0 x 2.5 m • Tools / accessories - 5 planetary grinding heads AR3 with ISO 40 - 8 ISO 40 mounts for rollers 200 mm - 16 ISO 40 mounts for grinding media 100 & 130 mm - 1 ISO 40 mount with disc 300 mm Pricing: • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments, accessories shown in the pictures are not included in the machine/scope of supply. Payment terms: Itsdpfezu Tltjx Alxjk • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty: • Machine as is, excluding any warranty claims Inspection possibility: • At the operating site near Kaiserslautern Availability: • Short-term / immediately after consultation

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Ijdpfezt Twtex Alxetk Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2005, Edge banding machine Manufacturer: IMA Type: Advantage 600 Year of manufacture: 2005 Technical data - Joint milling - Gluing unit for thin and thick edges - Imprint zone - 2x edge trimmers Itedpfxozuyiro Alxjk - Flush trimming - Multi-function trimming unit (MFA) - Profile trimming blade - Surface trimming blade - Buffing - Return system at the upper pressure roller Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition Iedpfxjzugn Is Alxotk