Used Manual Screw Press for sale (27,912)

Condition: excellent (used), From 2019, 15 kW, with container PM 32-E (32 m3) Iodpfxjyti Ips Abcetd

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Itedpfxeyvp Sne Abcjd

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work high speed friction screw press with motor, friction screw drive Itjdpfovuk N Tex Abcjd as is where is, WITHOUT putting into operation

Condition: not inspected (used), functionality: unexamined, table width: 350 mm, table length: 570 mm, wheel diameter: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Itjdpfx Asyr N T Ajbcod Submitting an offer commits you to timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Flywheel diameter: 1,250 mm Table dimensions: 570 x 350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,300 x 1,300 x 1,800 mm Machine weight: 600 kg External reference: Lot 80

Condition: used, Manual spindle press - Maximum filling height: approx. 90 cm Iedpfxeymr Tzo Abcotd - Pressing area: 102 x 72 cm

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm Itsdjdzqaaspfx Abcod bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3230, overall weight: 1,22,000 kg, Vaccari PV410 Screw Press (1997) 1700 Ton Capacity Weight 122000kg Press Includes Electrotherm Vacuum Furnace for Heating Part 2 Robots for Loading/Unloading Parts and Components from Furnace to Press and Then Post Stamp Removal Vaccari PV Series General Description: Screw presses expressly designed for forging under severe conditions. Preloaded structure, longer O-shaped ram and optimum guiding are specifications making these presses ideal for forging also special alloy, complex shaped pieces, with multiple sequences and with single or multiple-impression dies Furnace ref no. 77, Robot ref no. 1977 Fanuc R-30iB / M-10iA (2013) included with machine Sublocation - South Forging Press. Itodpfox Ap D Ijx Abcjd

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Ijdpfx Absxa Hy Uscstd Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Condition: good (used), Year of construction: 1963, stroke = 250 mm Itodpfxjydlxfs Abcod

Condition: used, Year of construction: 1962, nominal force 400 t stroke 140 - 400 mm no. of strokes 24 - 36 /min distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 700 x 700 mm ram surface 630 x 630 mm Itodjvuud Uspfx Abcod spindle diameter 220 mm power capacity 26,0 kW weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation

Condition: good (used), Year of construction: 1964, pressure 7 t weight 0,9 t 1417 Itsdpfxsqy Rn Te Abcod

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base Iodpeigwdwofx Abcstd -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: good (used), Year of construction: 1991, functionality: fully functional, - Normal pressure force kN (Mp) 160 (16) - Maximum achievable pressure kN (Mp) 200 (20) - Spindle diameter 60mm - Spindle pitch per revolution 32mm Iedpfovnbrxjx Abcetd - Number of guide columns 2 - Clear width between columns 410mm - Max. clear installation height between table top and ram 270mm - Ram stroke 210mm

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. Ijdpjpbwdlofx Abcstd The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: used, Year of construction: 1973, Column Spindle Press Ageo Type 60-960 Isdpjwtnigofx Abcjtd Important Information: – The stated price applies only to self-collection. – Dismantling, loading, and transport are the sole responsibility and expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Itjdpsv Td Erofx Abcod

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press by Hiller & Lutz Itedpfewxyn Eox Abcsd Year of manufacture: 1980 Fully functional In good used condition

Condition: not inspected (used), functionality: unexamined, table width: 500 mm, table length: 650 mm, overall weight: 1,500 kg, wheel diameter: 2,000 mm, No reserve price - guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 650 mm x 500 mm Flywheel diameter: approx. 2,000 mm MACHINE DETAILS Itsdsxqnu Ujpfx Abced Dimensions & Weight Dimensions (L x W x H): 2,000 mm x 2,000 mm x 2,100 mm Weight: 1,500 kg

Condition: not inspected (used), functionality: unexamined, table width: 390 mm, table length: 450 mm, overall weight: 700 kg, hole diameter: 90 mm, wheel diameter: 1,500 mm, No reserve price - guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Iodpfx Aboxqnrmscjtd Table dimensions: 450 x 390 mm Hole diameter: 90 mm Flywheel diameter: 1,500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,500 x 2,000 mm Weight: 700 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, We have a PRESTO SP11 screw press (11kW) for sale. The machine is in good working order with a new coat of paint. Ijdev T Uzwepfx Abcjtd With a pressure cap. 2 pieces available in stock (Price is for one piece).

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 150 359 - 11683, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. Ijdpfx Abet Ucpbscetd The machines are for sale as a single unit and individually. Inquire by phone or email!

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Itjdpfed D Ryfsx Abced with various punching tools

Condition: good (used), Manual spindle press 25 t - Clearance between columns: 400 mm - Spindle diameter: 80 mm - Vertical opening: 420 mm - Various clamping brackets Dimensions: LxWxH 1.2x0.8x2 meters / Weight 700 kg Itsdpfx Aex Haprsbcsd Subject to errors and omissions.

Condition: used, Year of construction: 1992, machine/vehicle number: 77K2, KSP11 SACMA double-pressure press, without thread roller, used, very good condition Itedpfswiwqfjx Abced

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Itodpfxswiwpuo Abcod