Used Axa for sale (35)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 65,155 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 500 mm, table length: 1,350 mm, table load: 550 kg, overall weight: 1,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 22, number of axes: 5, This 5-axis AXA DBZ vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2 x 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine is equipped with a main spindle speed range of 30–10,000 rpm and a maximum table load of approximately 550 kg. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. with 2x 4th axis RTA 1-180Automatic doors (possible for robot handling system)Main spindle speed range 30–10,000 rpmMain spindle drive power ~30 kW 40% EDMax. torque ~143 NmTool holder SK 40 DIN 69871 / AInternal coolant supply (water - air)Table clamping surface 2 x 1,350 x 500 mmMax. table load approx. 550 kgNumber of T-slots 3T-slot width 14H9 mmT-slot distance 160 mm4th axis 2 x RTA 1-180Number of tool positions 22 . tool diameter 85 mmMax. tool diameter with free adjacent pocket 135 mmMax. tool length 400 mmTool change time 4.0 secRapid traverse X/Y 25 m/minRapid traverse Z 20 m/minFeed force 9 kNTotal power requirement 55 kVAMachine weight approx. 10.0 tOperating hours: 65155 h Technical Specification Through-spindle Coolant Yes Gjdpfx Aney Sg I Eoxeit

Condition: good (used), Manufacturer: AXA Type: HFB 600 Control system: Siemens 840D Solutione Line Year of construction: 2015 Giodst Tdp Tepfx Anxjt Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: excellent (used), Year of construction: 2001, Control: Heidenhain TNC 410 Worktable Table size: 2030 x 500 mm Travel distances: X-axis: 1700 mm Y-axis: 600 mm Giodpfxoy Imqxj Anxot Z-axis: 600 mm Spindle speed range (stepless): 60 – 6000 rpm Rapid traverse: 25 / 25 / 20 m/min Number of tool stations: 22 tools Dimensions: 4.2 x 2.3 x 2.7 m Machine weight: approx. 10,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 7 A, pressing force: 150 t, stroke length: 300 mm, Equipment: CE marking, documentation/manual, MOTORIZED HYDRAULIC PRESS WITH AUTOMATIC DOUBLE SPEED AND RAPID ADVANCE CAPACITY: 150 TONS The monolithic frame is entirely laser-cut and securely bolted in package form. This characteristic makes all our presses deformation-resistant, even in areas subject to the highest stress. All components are manufactured in Italy. Hydraulic power unit with ICME submerged motor 400 V, 50/60 Hz; cylinders and frames made in Italy. GALTECH monobloc distributor. No. 2 single-direction external gear pumps in aluminium by VIVOIL: one dedicated to fast approach and return (set at 20 bar), and one with pressure adjustable via handwheel to set the required force. Maximum pressure valve with mechanical lock to prevent overpressure. 2 MP CETOP high-range modular block. Standard pressure gauge for displaying delivered power. INTECH electrical control panel, certified to current standards and independently CE marked. Maximum capacity: 150 tons Rapid approach speed: 1,450 mm/min Working speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Shaft diameter: M30 Gedpey E Rr Iofx Anxjit Tank capacity: 50 L Maximum pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1,300 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH TRAVERSING CYLINDER Capacity: 150 tons. Automatic dual-speed operation with fast mode. Special electrical panel with quick/slow changeover switch for one-handed operation. Traversing cylinder stroke: 816 mm. Internal clearance (side to side): 1,500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVABLE PISTON – NEW ITEM, CE MARKED. — AUTOMATIC DUAL-SPEED OPERATION WITH FAST MODE. — COMPLETE WITH SPECIAL ELECTRICAL PANEL WITH QUICK/SLOW SWITCH FOR ONE-HANDED OPERATION. — TECHNICAL DATA SHEET ATTACHED. - Rated force: 150 tons - Cylinder stroke: 300 mm - Internal clearance: 1,504 mm - Approach speed (fast): 1,450 mm/min - Working speed (slow): 105 mm/min - Ram stroke: 300 mm - Ram diameter: 110 mm - Stem diameter: M30 - Tank capacity: 50 liters - Max pressure: 350 bar - Voltage: 400 V, Frequency: 50–60 Hz - Motor power: 3 kW - Max current draw: 7.3 A - Weight: 1,500 kg Giedpfx Ajlruhdonxet Equipped with GALTECH distributors: • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps: one for rapid approach and return (set at 20 bar), and one with adjustable pressure via handwheel to set desired force. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard gauge to display delivered force. • INTECH electrical panel, certified according to current standards and supplied with independent CE marking.

Condition: used, Year of construction: 2003, Technical details: x-travel: 2300 mm y-travel: 1200 mm z-travel: 600 mm turning speeds: 30-10.000 1/min max. torque on the spindle: 254 / 159 Nm control: HEIDENHAIN TNC 430 tool taper: SK 40 tool change unit: 60 Pos. spindle: 40 / 25 kW fixed working table:surface area: 1.100 x 1.100 mm rotary table: 1.100 x 1.100 mm rapid traverse: 30 m/min total power requirement: 69 kVA weight of the machine ca.: 20 t universal machining center with indexing head (2,5°), NC-rotary table, max. table load 1.500kg, internal coolant supply 30 bar, paper filter, el. handwheel, chipconveyor, automatic doors, Gedjwltwmspfx Anxeit flush gun, no touch probe available, approx. 81.400 h main swich on approx. 72.200 h control on approx. 26.700 h program running on machine under power , for functional testing *

Condition: good (used), Year of construction: 2008, Universal machining center: Moving column Machine type: AXA VHC 2 - 1760 XTS Control: Siemens 840 D ShopMill Year of construction: 2008 TECHNICAL DATA: Travels: X-axis: 1,760 (2 x 630) mm Y-axis: 600 mm Gisdpfov Nhwdjx Anxet Z-axis: 800 horizontal or 770 vertical mm A-axis B-axis: +/- 100°, hydraulically clamped, infinitely variable interpolation Rapid traverse: (X/Y/Z): 40 / 40 / 30 m/min. Number of controlled axes: 5 Speed range: 30 - 6,000 1/min. Drive power: 30 kW Torque: 143 Nm Tool holder: SK 40 Tool changer Tool positions: 36 NC rotary table: AXA RTA 4L-520 Faceplate: Ø 520, for vertical & horizontal setup mm Tailstock: manual, center height 280 mm Machine weight: 12,000 kg Space requirement (LxWxH): 5.2 x 3.4 x 3.3 m Equipment features: Internal cooling (IKZ): 30 bar Chip conveyor: Discharging to the left, integrated 200 l coolant tank Coolant system Coolant tank: 400 l Measuring probe: 3 D, Renishaw RMP 60 with RMI receiver (wireless version) Optional use of external cooling with compressed air or emulsion Direct path measuring system: Heidenhain Operating mode: 4 Separating plate for work table for pendulum machining Hardened flat guides Counter guides coated with sliding surface (Turcite) Renewal of the sliding surface of the basic slide X/Y in 2022.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,604 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 36,604 h (verified via image) • Machine ON hours: 81,189 h • Overall dimensions: 4500 × 2250 × 2700 mm • Voltage: 400 V • Frequency: 50 Hz • Total power requirement: 45 kVA • Full load current: 65 A • External fuse: 80 A • Tool changer: Plate-type tool changer Gisdpfoy Edv Hsx Anxjt • Design/configuration: Traveling column; Left/Right work areas (pendulum machining) • Safety/enclosure: Maintenance door Additional equipment • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: Hydraulics for right/left work areas, incl. rotary union for 4th axis • Internal coolant supply (IKZ) • Chip conveyor • Emulsion (coolant) system • Recooling unit (chiller)

Condition: used, Year of construction: 1993, operating hours: 23,927 h, functionality: fully functional, machine/vehicle number: 85280, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 350 mm, overall weight: 23,000 kg, spindle mount: MK 4, Control: Siemens Sinumerik with magnetic clamping table, dimensions 4,000x1,500 mm, due to insolvency. Can be inspected under power. Gjdpfxoxk U T Rj Anxeit

Condition: used, Year of construction: 2003, CNC Universal Machining Centre Manufacturer: AXA Model: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travels: X/Y/Z = 2,300 x 1,200 x 600 mm Gsdpfjwwt Nmox Anxeit NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 t 12526ä

Condition: ready for operation (used), Year of construction: 1991, operating hours: 13,063 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 480 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 355, spindle speed (max.): 6,000 rpm, number of axes: 3, This 3-axis AXA VSC-2M was manufactured in 1991. It features a CNC control type and has an approximate total connected load of 20 kW. With around 13,063 operating hours, this machine represents an opportunity for high-quality machining capabilities. If you are looking to get high-quality machining capabilities, consider the AXA VSC-2M vertical machining centre we have for sale. Contact us for further details. • Voltage: 380 V • Control voltage: 24 V Gjdpfx Aey Ddtpsnxjit • Frequency: 50 Hz • Total connected load: approx. 20 kW • Control type: CNC • Operating hours: approx. 13,063 h

Condition: good (used), Year of construction: 2002, 5-axis CNC machining centre Manufacturer: AXA Machine model: VPC 50 U Control system: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Portal construction TECHNICAL DATA Travels Gsdpfoyz R Hdox Anxjit - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle – swivelling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size fixed table L x W: (mm) 1,100 x 1,100 - Table diameter built-in rotary table: (mm) 1,100 x 1,100 Modifications and errors in the technical data and information excepted.

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 2,240 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 900 mm, We offer for sale a high-quality German-made AXA VSC 1-M CNC vertical machining center. This machine is suitable for both single-piece and series production, especially for machining longer workpieces. Its robust construction ensures stability and machining precision. Giodpjy A Sanofx Anxet Technical specifications: Manufacturer: AXA Model: VSC 1-M Year of manufacture: 2009 Control system: Heidenhain iTNC 530 Travel paths: X-axis: 2240 mm Y-axis: 600 mm Z-axis: 900 mm Spindle speed: up to 10,000 rpm Taper: SK40 Machine weight: approx. 12,500 kg Equipment: Chip conveyor Tool magazine Enclosed working area

Condition: good (used), Year of construction: 2012, AXA DBZ 2/50 double station machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, 16-position tool changer, SK 50 tool holder, Spindle speed up to 4,000 rpm, Gedpfx Ajridf Uonxeit Milling spindle - water-cooled hollow shaft motor, dir. Measuring systems, chip conveyor, heat exchanger, switch cabinet, oil mist lubrication, Rittal cooling system,

Year of construction: 2003, condition: ready for operation (used), A CNC large-format machining center Axa including peripheral equipment is available. Travel X/Y/Z: 4000mm/900mm/950mm, working area X/Y: 4000mm/700mm, tool stations: 72, spindle speed: 10000rpm, control: Heidenhain iTNC 530, operating hours: 77956h, spindle hours: 29342h, power-on hours: 80109h. Including chip conveyor, internal cooling, chip spray gun, oil mist extraction, handwheel, probe and tool measurement Blum Laser. Documentation available. An on-site inspection is possible. Gijdpfx Aeyb Scfenxot

Condition: good (used), Year of construction: 1999, For sale is a horizontal machining center from Axa of the Vario type with 2 milling tables. Gisdpfx Astt Abmonxst The machine is in good condition and has done little "heavy machining" (was mainly used for drilling and thread cutting). Technical data: Year of manufacture 1999 Control: Heidenhain TNC 410 M digital Table dimensions 2030 mm *500 mm Maximum table load (evenly distributed) 800 kg Min. speed 30 1/min Max. speed 10.000 1/min Drill length on X-axis (mechanical feed) 1760 mm Drill length on Y-axis (mechanical feed) 500 mm Drill length Z-axis (mechanical feed) 620 mm Machine dimensions: Height: 3900 mm Length: 2900 mm Width: 3000 mm Weight: 9 tons SCOPE OF DELIVERY/EQUIPMENT 1 spindle version SK 40 DIN 69 871 A 1 switch cabinet (integrated in the rear of the machine) Ball screws: Made by Deutsche Star Central lubrication unit: Bielomatik Hydraulic unit: Hydac RTA 2-300 MK-3 tailstock manually operated Electric handwheel HR 410 Scraper belt conveyor discharge side right Measuring probe TS 630 WORKPIECE HOLDERS NOT INCLUDED IN THE OFFER Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2012, 5-Axis CNC Machining Center Manufacturer: AXA Machine Model: VPC-2800U Control System: Siemens Year of Manufacture: 2012 Technical Specifications Working Area - X travel vertical (mm): 3,900 - Y travel (mm): 2,940 - Z travel (mm): 1,100 CNC Rotary Table - Clamping area (mm): ø 2,800 Feed Drive - Max. rapid traverse speed in X/Y/Z (m/min): 30/30/25 Working Spindle - Standard drive No.: 140 Spindle speed range (rpm): 30-7,500 Spindle power max. duty cycle 100% (kW): 63 Spindle torque max. duty cycle 100% (Nm): 191 Tool holder: SK50 Swivel Head - Swivel range B-axis (degrees): 90 - Indexing: freely interpolating Tool Changer - Tool stations: 60 Please note: The machine is NOT equipped with a turning function. Changes and errors in the technical data and information excepted. Gisdpfx Ajyk T Emonxet

Condition: excellent (used), Year of construction: 2008, operating hours: 50,236 h, functionality: fully functional, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully functional, has only been used for light machining such as aluminium. Of particular note: Each of the two NC tables allows clamping of workpieces up to Ø1,100 mm – see drawing. A fixed milling table can also be mounted. A high-speed spindle insert SK50 is available for this machine. Technical data: Year of manufacture: 2008 Controller: Heidenhain iTNC 530 Machine on: 50,236 hours Spindle hours: 16,319 X-axis: 2,360 mm Y-axis: 600 mm Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 positions on 2 chains NC rotary tables (2 pieces) Type: SKH-NC 7/T Table plate: Ø 630 mm Max. load: 750 kg Clamping: Hydraulic Dimensions: 5,650 mm x 3,700 mm x 3,200 mm Weight: approx. 22,000 kg Equipment: IC coolant system with 50 bar high-pressure pump, belt filter, Heidenhain RCN 729 measuring system, 3D probe Renishaw OMP 60, electronic handwheel, 2x Visiport (inspection windows), chip conveyor. Tool holders are not included in the offer, but can be supplied at additional cost. Transport and loading can be organized throughout Europe on request for an additional fee. Prices are subject to VAT. Gsdpfx Anoyi Er Aoxjit Inspection possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales – BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or to contact us, please visit our website.

Year of construction: 2002, condition: excellent (used), X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw , BLUM - Werkzeugbruchkontrolle , Späneförderer , Bandfilteranlage Gijdpfxjgb Rq Sj Anxot

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTC530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 2 x 750 mm Travel Y-axis: 500 mm Travel Z-axis: 600 mm Rapid traverse X / Y direction: 25 m/min Rapid traverse Z direction: 20 m/min Feed force: 9 kN Spindle speed range: 30-12,000 rpm Tool changer: 22-position Tool holder: SK40 Maximum tool length: 400 mm Maximum tool diameter: 85 mm (135 mm with adjacent stations empty) Tool change time: 4.0 s Clamping area: 2 x 1,350 mm x 500 mm Maximum table load per table: 550 kg MACHINE DETAILS Control model: Heidenhain iTC530 Drive power: 30/20 kW Total power requirement: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6.0 x 3.5 x 3.5 m Machine weight: 10,000 kg Giodpfsymz D Njx Anxjt EQUIPMENT Internal cooling Coolant system with paper band filter Documentation

Condition: new, AXA 360° swivel cantilever crane Max capacity : Kg 500. Max height : mm 2804. Max overhang : mm 1360. Easily maneuverable due to 360° rotation and high load capacity pivoting wheels with bumper supports and parking brakes. Due to the frontal footprint of only 995mm, it can be used in aisles and confined spaces. The lifting arm is extendable in 4 different positions. Giedpfxsgypgde Anxjt

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Gsdefh R N Djpfx Anxeit Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Cylinder rod diameter mm 45 Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Weight Kg 200 Gjdpfx Ajrvz A Sonxeit

Year of construction: 2003, condition: excellent (used), Working travels 6000x1000x1200mm B-Axis milling head +/-90° Table size 6400x1000mm Spindle taper HSK-100 Spindle speeds -9000 rpm Tool changer 80 pos. Control SIEMENS 840D Coolant through spindle Tool measuring device Zero point clamping system 3R MARCELS MASCHINEN CH Giodpfxjd Rz Uvo Anxot

Condition: used, Quick change tool post, tool holder head, quick change tool post, quick change boring tool post, quick change boring bar post, quick change turning tool post -Manufacturer: AXA, quick-change tool holder Multifix D1H 63180 -Shot dimensions: see photos -Clamping length: 180 mm Gijdpjhpu Uqjfx Anxot -Dimensions: 180/95/H185 mm -Weight: 8.3kg