Used Bag House Collector for sale (5,722)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. Fodpfx Aey Urtfofpjpi The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Fpodpfx Afod Nwk Uepsi Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Condition: good (used), The machine is in good condition. Fpedpfx Aevu Ak Nofpei

Condition: good (used), Second-hand machine used in a refrigerator Fpedpovutrwsfx Afpsi

Condition: excellent (used), functionality: fully functional, External dimensions: length 5m x width 3m x height 6m Filtration area: approx. 112 m² Engine power: 11 kW Capacity: approx. 15,000 m³/h Fedpfxszi Rkco Afpepi Mechanical cleaning of filter bags Return channel for cleaned air

Condition: new, Autobag bags are available for sale in the following sizes: 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0.02€ x Bag 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag 4 Pallets 0.017€ x Bag Fpsdpfx Afsu Ni Rpjpsi 5 Pallets 0.016€ x Bag and so on 10 and more 0.01€ Bag 1 million Autobag bags from 0.01€ each

Condition: like new (used), Year of construction: 2023, This machine is tailor-made for businesses seeking a simple and reliable packaging solution. The maximum speed is up to 1,500 bags per hour. Operation is easy, requiring just two simple steps: filling the bag from the top and sealing the bag. For sale: Autobag bags in the following sizes: 150 × 250 – 1.5 million bags 200 × 320 – 2.5 million bags Price for full Euro pallet: 1 pallet: €0.025 per bag 2 pallets: €0.019 per bag 3 pallets: €0.018 per bag 4 pallets: €0.017 per bag 5 pallets: €0.016 per bag and so on Fpjdpfor E Dpzsx Afpoi 10 or more pallets: €0.01 per bag From 1 million Autobag bags: from €0.01 each Currently reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Production orientation: Vertical Conveying system: Infeed and outfeed optional and dependent on product Film feed: Rear Forming shoulder: Fixed Operator display: Touchscreen with memory function Drives & controls: 3 servo motors and PLC control system Packaging length: 50–190 mm Packaging width: 50–150 mm (depending on film width) Packaging height: Dependent on forming shoulder Speed: 15–30 bags/min, depending on material, pack size, and product Film width: 110–320 mm Power consumption: Approx. 4.6 kW Machine material: “304 stainless steel with surface treatment” Printer bracket: Suitable TTO or ink wheel printer optionally available at extra charge Delivery time: Current lead time under 10 weeks Z-conveyor system: €8,500 Features: Stainless steel configuration, suitable for the food industry • Application for granules and small parts such as screws • Sectors: Pet food, food (coffee, nuts), metal industry • Simple touchscreen operation with color icons • Safety protection covers • Can be integrated upstream/downstream with other machines • Customer-specific modifications/designs on request • 12-head scale integrated, hopper 0.8L Additional options (on request and at extra cost): Fsdeq Ikhajpfx Afpepi • Euro hole punch etc. Production orientation: vertical

Condition: new, functionality: fully functional, Features of the system 1. Chain conveyor, 2.9 meters in length (other lengths available upon request) 2. Two custom-made forming shoulders with a fixed shape, adapted to the product dimensions 3. Single film loader + Automatic film centering device 4. End sealing unit, box motion, single sealing jaw 5. Robust, medium fin sealing structure 6. Eight servo-controlled drives 7. HMI control panel 8. Four individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Bag length programmable 13. Standard running direction: left to right Technical parameters 1. Product length: L120-600mm 2. Product width: B70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1 phase, 220V 50Hz 7. Total power consumption: approx. 8.8 kW Fedok Dz Hwspfx Afpepi 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: good (used), Bridge crane, overhead crane, bearing housing, trunnion, bearing block, swivel mounting, bearing housing for crane hooks, crane hook bearing -Manufacturer: Demag, bearing housing crane hook bearing Fsdpsziayyefx Afpopi -Type: P5013 STB No. 6 -Bore: Ø51 mm -Dimensions: see photos -Dimensions: 180/130/55 mm -Weight: 6.0 kg

Condition: used, Year of construction: 1997, Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data - Capacity: - 5 L BIB: 650 BIB/hour / 7 pallets/hour - 19 L BIB: 420 BIB/hour / 13 pallets/hour Fsdpfoymr U Esx Afpjpi - Formats: 5 L / 19 L Bag‑in‑Box - Application: Water and syrup - Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrapping, pallet labelling Scope of Delivery  - Carton erector | CERMEX | F37 | 1999 | Formeuse de carton - Bag‑in‑Box filler | OETTEL | A 4001 | 1999 | BIB filling machine - Checkweigher | PRECIA MOLEN | X241‑DCKW | 1999 | Weight control - Carton closer | CERMEX | C642.41 | 1999 | Carton closing - Carton conveyors | ANDUZE |- | 1998 | Conveyor system - Labeller | VIDEOJET | APL 210 LH | - | Carton labelling - Palletizing robot | BEMA | - | 2017 | Fanuc robotic palletizing system - Stretch wrapper | BEMA | Silkworm LS | 2017 | Stretch wrapping unit - Pallet labeller | LOGOPAK | - | 2023 | Pallet labelling machine  

Condition: used, Year of construction: 2010, Overview  Fpodpfswiu Hksx Afpji This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data - Capacity: Up to 600 bags/hour (depending on product viscosity and format) - Volume range: 0.5L – 3L - Pressure: min. 6 bar - Bag type: Doypack with screw cap - Filling principle: Gear pump with high-precision flowmeter - Operation: Semi-automatic (manual bag positioning, automatic filling and capping) - Frame: Stainless steel - Cleaning/Sterilization: Integrated cleaning and sterilization functions - Control panel: Touch screen Scope of Delivery  - AIT DOYPACK semi-automatic filling and capping machine - Integrated gear pump and flowmeter - Touch screen control panel

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge Fpjdpevptt Rofx Afpsi - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: good (used), Minipack Torre Mailbag Packaging Machine This machine is in excellent condition and ready for production. The photos show the actual product. Made in Italy. Manufacturer’s description: Fpedpfx Afszdavxjpei The Mailbag is a compact digital bagging system, ideal for packaging brochures, newspapers, and books. Powered by a single-phase power supply (airless), it’s easy to use with wheels, and the system can be easily moved from one location to another with minimal fuss. A product, such as a magazine, inserted into the feeder activates a photocell, detects the package, and moves the bag and product into the sealing system. A combination of transverse and longitudinal seals closes the package and creates a seal for the next product. The finished package gently falls into the receiving hopper at the bottom of the machine. Technical data: Production speeds, depending on package and film dimensions (up to 1200 pph) Min. package width: 160 mm Maximum package width: 250 mm Min. package length: 100 mm Maximum package length: 360 mm Maximum film thickness: 30 microns Machine dimensions: 600 mm x 840 mm x 1050 mm Weight: 144 kg Power supply: 230V Power consumption: 0.6 kW

Condition: excellent (used), Year of construction: 2018, We offer a used SchurStar 2060-C packaging system—an industrial packaging machine designed for filling and sealing pre-made bags in production and packaging processes. The machine is designed for flexible packaging of food, industrial, pharmaceutical, and chemical products. The SchurStar 2060-C model allows for operation in either manual or automatic filling mode. The system feeds bags continuously or intermittently, depending on the product type, packaging format, and production process organization. As a result, the machine can be used for smaller production batches as well as in medium- or high-throughput lines. The SchurStar 2060-C is designed for short changeover times and to minimize packaging material waste. The machine can handle various types of packaging materials, such as PE, CPP, co-extruded films, and laminates. The system is suitable for packaging products that require aesthetically pleasing, consistent, and leak-proof packaging. The AISI 304 stainless steel construction facilitates hygiene maintenance and allows the machine to be used in food processing facilities. The system can be equipped with additional modules, such as feeders, hoppers, an air extraction system, a compression unit, a bag vibration system, gas flushing, marking, or labeling. Technical Specifications: Manufacturer: Schur Technology a/s Model: SchurStar 2060-C Type (as per nameplate): Y30054 Year of manufacture: 2018 Standard: EN 60204-1 Construction: AISI 304 stainless steel Power supply: 3 × 400 V + N + PE, 50 Hz Rated power (according to catalog data): 3.5 kW Maximum circuit breaker rating: 16 A Load: 10 A Ikmax: 15 kA Grounding: TN-S Air supply pressure: 700 kPa Air consumption: 140 l/min Bag feed speed: 3–30 m/min Continuous-duty output: up to 80 bags/min, depending on the product and bag format Intermittent-duty output: up to 35 bags/min, depending on the product and bag format Format changeover time: 4–5 minutes Fpjdpfx Afezhwivopsi Maximum bag dimensions: width 450 mm, length 500 mm Minimum bag dimensions: width 100 mm, length 100 mm Packaging material: PE, CPP, coextruded films, laminates Material thickness: 0.040–0.140 mm Weight: approx. 650 kg CE marking: yes Key advantages: packaging in pre-made SchurStar bags capability to operate in manual or automatic mode continuous or intermittent bag feeding throughput of up to 80 bags/min in continuous operation quick format change in 4–5 minutes low packaging material waste AISI 304 stainless steel construction capable of handling various packaging materials suitable for producing small, medium, and large batches can be integrated with additional packaging modules renowned manufacturer Schur Technology Applications: packaging of food products packaging of non-food products packaging of pharmaceutical products packaging of chemical products packaging of bulk, portioned, and

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 285 m², input voltage: 380 V, volume flow: 30 m³/h, pressure: 6 bar, total width: 2,450 mm, total length: 4,500 mm, total height: 7,500 mm, compressed air connection: 6 bar, Equipment: documentation/manual, Bag filter – galvanized metal structure – air flow rate: 30,000 m³/h filter cleaning: reverse-pulse air jet cleaning with control unit filter fabric: antistatic polyester, 500 g/m² 1 settling chamber dimensions: 4500 x 2450 x h7500 mm 3 ATEX-certified explosion-proof ventilation panels – new – horizontal positioning – filtered material discharge: screw conveyor, rotary valve – new – upper safety guardrail ladder electrical control panel with star-delta starter or inverter 1 electric dust collector, 37 kW COMPLETE WITH CE DOCUMENTATION – USER AND MAINTENANCE MANUAL Fpsdpfxszk U I Is Afpsi

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 20,000 m³/h, filter area: 160 m², total height: 8,000 mm, total length: 2,400 mm, total width: 2,500 mm, Self-cleaning bag filter - NEW - Airflow capacity: 20,000 m³/h Dimensions: approx. 2500 x 2400 x H 9000 mm Total filter media surface: 160 m² Filter media type: antistatic Filter media cleaning by reverse air jet, control via sequencer unit Fjdpfx Afsxu Dh Sopepi - Screw conveyor, rotary valve for discharge of filtered material into big bag collection system - Electrical control panel for the machine - Suction fan, power to be defined with end user - Discharge fan for filtered material, power to be defined with end user Machine supplied with CE declaration, operating and maintenance manual.

Condition: used, mileage: 30,154 km, power: 100 kW (135.96 HP), first registration: 07/2024, fuel type: electric, overall weight: 4,100 kg, color: white, gearing type: automatic, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,946 mm, loading space length: 3,265 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, No. 67 - You can find this and many other inspected Mercedes-Benz vans on our website: ----Despite the permissible total weight of 4100 kg (1560 kg payload), this eSprinter can be driven with a "standard" Class B driver's license. This is due to an exemption regulation issued by the BMVI. In addition, this eSprinter is exempt from truck tolls. ----Mercedes-Benz eSprinter 414 L2H2 from first owner (ex-lease) with many extras, in excellent overall condition. Recent service, directly at Mercedes-Benz, new MOT (TÜV) - valid until 07/2027. High-voltage battery 56 kWh. Range approx. 223 km. Completely high-quality converted cargo area by the manufacturer Bott. Can be used as a workshop, mobile service vehicle, customer service vehicle, etc. ----The numerous extras include, among others: maintenance package, LED high-performance headlights, winter package plus, driver's seat with suspension, ARTICO black leatherette, acoustic package, turning assistant, start-up information assistant, active distance assistant Distronic, blind spot assistant, active lane keeping assistant, parking package with reversing camera, auxiliary heating (electric), heated windshield, heated steering wheel, leather steering wheel, storage for smartphones incl. wireless charging, navigation, MBUX multimedia system, smartphone integration package, charging package dashboard, preparation for Remote and Charging Services Premium, high-voltage battery (56 kWh), AC charging 11 kW, DC charging 115 kW, charging socket for electric vehicle Combo 2/Type 2, digital extra: updates for intelligent speed assistant, parking brake electric, active brake assistant, ultracap - locking automatic transmission, operation of tachograph at the front under the headliner, pre-air conditioning, lockable compartment in storage above the windshield, seat heating for driver and passenger (...).----Permissible total weight: 4100 kg Unladen weight: 2540 kg Payload: 1560 kg Wheelbase: 3665 mm Cargo area L x W x H (approx. in cm) 327 x 178 x 194 VIN: W1V4UBHZ1SP737621 Warranty COC document available 2 keys----Errors, changes and prior sale reserved Special equipment: Airbag passenger side, acoustic package, trailer coupling: electrical system for trailer socket, exterior mirrors elect. foldable, floor covering: plastic in the cargo/passenger compartment, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, entry handle on rear pillar, left rear, entry handle on rear pillar, right rear, tachograph operation in front under the headliner, parking brake electric, all-weather floor mats, grab handles A-pillars, rear door (opening angle 270 degrees), inductive charging cradle for smartphone (wireless charging), interior: air vents dashboard, folding cover for storage compartment, instrument cluster with color display, charging package dashboard (USB connections and 12V socket additionally), cable duct on rear portal, cable duct on side wall, steering wheel with multifunction, marker lights on the side, parking package with reversing camera, spare wheel in driving condition, spare wheel holder under frame end including jack, seat cover / upholstery: ARTICO leatherette, seats in cab: double passenger seat, seats in cab: passenger seat heated, seats in cab: driver's seat heated, seats in cab: driver's seat with lumbar support, seats in cab: suspension seat comfort, driver's side, seats in cab: seat box driver's seat, low, stowage compartment lockable in storage above windshi Fpodpfszk Tr Sox Afpji

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing -Manufacturer: Alco, filter drier housing unused in original packaging -Type: ADKS-PLUS 969-T/PCN 883556 -Max. Operating pressure: 34.5 bar Fpodpfx Aofx Atvjfpei -Connection: 1-1/8 " -Dimension package: 330/200/H160 mm -Weight: 4.1 kg

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing -Manufacturer: Alco, filter drier housing unused in original packaging -Type: ADKS-PLUS 969-T/PCN 883556 -Max. Operating pressure: 34.5 bar -Connection: 1-1/8 " Fedpfxefx Atrs Afpopi -Dimension package: 480/210/H160 mm -Weight: 5.1 kg

Condition: used, Air bellows, roller bellows, air cushions Fpedpfob A Tfxjx Afpji -Manufacturer: Goodyear -Part-Number: 1R11-700 566222709060000 -Weight: 7 kg

Condition: used, Electric chain hoist, crane, indoor crane, assembly crane, electric lift, chain bag chain hoist -Chain bag: for crane chain hoist -Dimensions: 720/300/280 mm Fpjdpfx Afjgpmbiepei -Weight: 6.3 kg

Condition: used, Pillow Block Housings, Plummer Block Housings, Pillow Block Pillow Block Housings, Pillow Block Housing Unit, Pillow Block Housing Units, Pillow Block SKF, Pillow Block Housing Unit Fpedpfx Asmu Rm Sefpji -Manufacturer: GLH, split pillow block housing type SNG 524-620 -Bore diameter: 157.5mm -Number: 3x bearing housing available -Price per piece -Dimensions: 410/190/H280 mm -Weight: 26 kg/pcs

Condition: good (used), Control amplifier, servo motor control Fjdpfx Afeb I Thzopopi -Case: without control cards -Quantity: 2x cases available -Price: per piece -Dimensions: 700/500/H320 mm -Weight: 40 kg/piece

Condition: used, Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Transfer: in the current condition as seen -Lid pushed in: see pictures Fedpod Sx Ndjfx Afpopi -Air filter housing -for: filter donaldson XLP 18 2046 -Inlet / outlet: O 150/149 mm -Dimension: O 355/595 mm -Weight: 12.35 kg