Used Baked Goods for sale (21,846)

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: VD 09.16.1408, WITH SHRINK TUNNEL Commission No.: 25.150.71 Bwodpfxj Ahng No Antow Equipment / Additional information: Sealing frame dimensions: approx. 800 x 600 mm Packaging capacity: up to 20 cycles/minute (depending on the product and operation) Film roll width: max. 750 mm (suitable for center-folded or flat film; film thickness approx. 12 µm to 80 µm) Clearance height: approx. 100 – 400 mm // Working height: approx. 870 – 970 mm Sealing technology: Impulse sealing system with a Teflon-coated cutting/sealing wire (odorless) Typical applications: Printed materials (books, magazines) Glass products in multipacks General consumer goods and industrial items requiring shrink-film protection

Condition: excellent (used), Catalog number 8139 Bedpo Ahnhfsfx Antsww TECHNICAL DATA - max. diameter of the main saw blade with a scoring saw: 300mm - max. cutting height: 100mm - main saw blade adjustable up/down + angle, manually - spindle diameter: 30mm - with a crosscut fence - cutting length on the fence: 3200mm - cutting width adjustable manually with the fence: 1300mm - with a side fence - with a scoring saw - max. diameter of the scoring saw: 120mm / 8500 rpm - spindle diameter: 20mm - main motor: 5.5kW/4000 rpm - diameter of the dust extraction port: 60mm - dimensions of the table with extension and widening: 1730x1390mm - blade guard - dimensions (L/W/H): 3420x3860x1150mm - weight: approx. 800kg ADVANTAGES – Italian made – with a scoring saw – unpainted – DTR documentation – used saw, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2021, operating hours: 9,000 h, 2021 | Liebherr L 566 Xpower | Used Wheel Loader | 9000 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 129500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 55 inspection points 46 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good-operating and good-looking wheel loader for its hours. There is play in the boom pins and slight play in the articulation pin. Lubrication is good. The engine air filter and cabin filters need to be cleaned. Engine oil is at the minimum level and needs to be topped off. Stall test passed; the machine is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41125 Equippo" is commonly used when looking up more details online. Bwjdpfx Ao Ahn Ebentjw 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,550 h, load capacity: 10,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 3,900 mm, power: 185 kW (251.53 HP), empty load weight: 39,820 kg, drive type: Diesel, construction width: 4,150 mm, Empty container reach stacker Transmission: Dana TE17300 Condition: Ready for operation and fully functional Technical condition: very good Front tire size: 14.00-24 Rear tire size: 14.00-24 Bwjds Ahlw Nspfx Antjw DE: Central lubrication system, rear view camera, air-suspended driver seat EN: Central lubrication system, rear view camera, air-suspended driver seat

Condition: excellent (used), CATALOGUE NUMBER 8031 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade arbor diameter 70mm - max. cutting height 120mm - table width with extension 1030mm - table length 1740mm * top: - anti-kickback pawls (barrier to prevent material from recoiling) 2 rows - sliding roller, metal, pressure roller - anti-kickback pawls/latches - sliding roller, metal, pressure roller - saw arbor - 2 smooth, metal sliding rollers * bottom: - guide strip - anti-kickback pawls/latches - track - central electric track lubrication - stepless feed rate adjustment - feed motor 1.1kW - main motor 25kW - diameter of the dust extraction nozzle 1x200mm, 1x120mm - overall dimensions L/W/H 2550x1800x1450mm - weight 1770kg ADVANTAGES - Made in Italy Bodpfx Aj Aguk Nenteww - Unpainted - Very good condition - Used multi-blade saw Net price: 57900 PLN Net price: 13470 EUR depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: good (used), Year of construction: 2017, Conveyor system, Interroll, approx. 100m in length – used: Price ex works: only €15,950 (net), disassembled, packed, and loaded! Manufacturer: Interroll Type: 400V roller conveyor Year of manufacture: 06/2017 Element width: approx. 79cm Roller length: approx. 70cm Roller diameter: approx. 5cm Includes scale Includes control unit Belt-driven: straight: L = 25 m, W = 70 cm, H = 80 cm via RollerDrive: straight, driven: L = 62 m, W = 70 cm, H = 80 cm 90° bend, driven: 5 pieces, W = 70 cm, H = 80 cm 45° bend, driven: 5 pieces, W = 70 cm, H = 80 cm diverter, driven: L = 120 cm, W = 70 cm, H = 80 cm diverter, driven: L = 160 cm, W = 70 cm, H = 80 cm Condition: good Available: immediately Location: Erfurt area, later storage in Frankenberg / Saxony Bwsdpfxe Ahxtfs Antow The Mosca transfer unit shown in the picture is not included in the scope of supply – but is also available for sale at an extra cost!

Condition: good (used), Approx. 20 pallet lifting tables, E-shaped, Hymo – used: Price per unit ex works: only €950 (net) including loading Manufacturer: Hymo Type: unknown Year of manufacture: unknown Load capacity: max. 1,000 kg Useful lifting height: should be 80 cm 3/400 V/24 V/50 Hz Condition: good, hydraulic oil has been drained Available: immediately Location: Warehouse Frankenberg / Saxony Bode Ahxw Hspfx Antoww

Condition: like new (used), Year of construction: 2019, operating hours: 7,300 h, machine/vehicle number: IntNr231648, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2019, with only approximately 7,300 operating hours. Technical data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine type: CNC Swiss-type automatic lathe Year of manufacture: 2019 Control system: FANUC 31i-B Number of CNC axes: 8 Number of spindles: 2 Operating hours: approx. 7,300 h Condition: very good Main spindle Max. bar diameter: 13 mm Bwodpj Ahq S Hefx Antsw Max. machining length: approx. 190 mm Max. spindle speed: 15,000 min⁻¹ Spindle drive power: approx. 4 kW C-axis Counter spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 min⁻¹ Drive power: approx. 4 kW C-axis resolution: 0.001° Tool turret 1 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Tool turret 2 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Front machining up to 4 tool positions Rear/opposite-side machining Up to 8 tool positions Of which up to 4 are driven positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V The machine can be inspected while powered on by prior arrangement. Subject to changes, errors and prior sale!

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Bsdpj Ahq Ekefx Antsww Technical data: >> Machine no. 57752/08 >> Swiveling rotary table >> Speed: 40 - 2000 rpm >> Feed for 2 axes >> Drive power: 1 / 1.5 kW >> Travel ranges X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill – SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The Deckel has very little backlash and all spindles can be moved easily. The machine has a brake motor; the control cabinet was modified by the previous owner. The BGR inspection is no longer valid. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on site while it is powered on. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: good (used), Year of construction: 2006, Used insertion press HAEGER 824 plus-1H with feed hopper Technical data: Manufacturer: HAEGER Model: 824 plus-1H Year of manufacture: 06/2006 Condition: good, used Press force, min: 2.0 kN Press force, max: 72.0 kN Insertion capacity up to 1800 pieces Adjustable range of ram: 0-220 mm Overhang: 610 mm Connections: 3 phases, 50 Hz, 380 V, 16 A Electronic control / CE: 24 V Motor power: 3.6 kW Oil capacity: 83 l Dimensions (W x D x H): 1100x1650x2400 mm Weight: 1450 kg Fully hydraulic insertion press for manual and/or automatic processing of insertion fasteners from all manufacturers. Fastener range: M2-M10. Standard equipped with a patented safety control system. Due to the integrated fixed stop, the precise pressure build-up, and the low assembly value, the machine is ideally suited for use as an "assembly/riveting press". including accessories: Modular, patented fastener feeding system from Haeger-MAS-9 Advantages: - Fasteners in the size range M2-M8 can be fed - Processing capacity up to 1500 pieces per hour - Very easy tool change without adjustment effort (plug-in tool modules) - Tool change time, e.g. from nuts to bolts or bushings, approx. 2 minutes - Large feed hopper made of wear-resistant, stainless steel Bjdpfxs Ahwkre Antsww The picture shows the same model, but not the machine itself that is for sale.

Condition: excellent (used), CATALOG NUMBER 7213 TECHNICAL DATA - max cutting height 180mm - track width 400mm - shaft width 370mm - shaft diameter 60mm - max blade diameter 300mm - blade bore diameter 80mm - min workpiece length 630mm - max workpiece width 600mm from above: - pneumatic pressure - pawls - pressure shaft, metal 2 pcs - pawls - blade shaft - smooth pressure shaft - pawls - smooth pressure shaft Bodo Af Uw Nspfx Antjww from below: - metal shaft, pulling, toothed 2 pcs - pawls - track - blade shaft - track - continuously variable feed speed adjustment via frequency inverter - main motors 2x55kW - feed motor 4kW - hydraulic body lifting up/down - hydraulic adjustment of blade shafts - pump motor 0.37kW - central lubrication - extraction nozzle diameter 1x300mm, 1x380mm - dimensions L/W/H 3200x2350x2000mm - weight approximately 5500kg ADVANTAGES - Made in Italy - Two-shaft - Multi-blade saw, used, very good condition Net price: 218900 PLN Net price: 50507 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: used, Year of construction: 2009, Overview This Twin Pack MDEL-S handle applicator, built in 2009, applies carry handles to beverage multipacks. It produced multipacks in several configurations, from 2x3 and 3x4 packs of 0.5 l bottles to 2x3 packs of 0.75 l and 1.5 l bottles, and runs on pre-spooled handle tape rolls. The machine was taken out of production in October 2026 when the line was replaced, and it is dismantled and ready for transport. Technical data - Manufacturer: Twin Pack (Italy) - Model: MDEL-S - Year of manufacture: 2009 - Machine type: handle applicator for beverage multipacks - Formats: 2x3 x 0.5 l, 3x4 x 0.5 l, 2x3 x 0.75 l, 2x3 x 1.5 l - Handle material: pre-spooled handle tape rolls - Control: Siemens SIMATIC touch panel - Suitable for: water, soft drinks and beer Bwsdpfxo Ahzarj Antow Equipment - Handle application unit in a guarded frame with transparent doors and signal tower - Pack infeed conveyor with guide rails and perforated safety guard - Separate tape unit with reel holders and push-button station with emergency stop - Operator panel on a swivel arm with key switch and emergency stop Condition Very good condition. Dismantled after the line change in October 2026 and stored. Availability Available immediately. Location: Serbia.

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Bwsdpfehik Ezsx Antew Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, functionality: fully functional, Year of construction: 1993, operating hours: 14,987 h, load capacity: 12,000 kg, lifting height: 5,100 mm, fuel type: diesel, mast type: simplex, construction height: 4,200 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 20,100 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,500 mm, Diesel forklift Load center: 1200 Fork width: 200 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Bodpsz Ev S Usfx Antsww Rear tire size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are available from us at any time. We would also be happy to buy your used forklift outright, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this 12120-35 model. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale in our showroom. Side shifter, fork positioner, Heater, full cabin

Condition: used, Year of construction: 2002, functionality: fully functional, load capacity: 7,500 kg, construction width: 2,500 mm, Rotary device Bwodpj Ahut Ijfx Antsw Condition: Ready for use and fully functional Technical condition: very good

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 14,768 h, load capacity: 6,000 kg, lifting height: 7,550 mm, free lift: 2,450 mm, fuel type: electric, mast type: triplex, construction height: 3,490 mm, fork carriage width: 1,520 mm, fork length: 1,600 mm, empty load weight: 13,174 kg, total length: 5,050 mm, drive type: Elektro, construction width: 2,400 mm, Electric Sideload Forklift Load Center: 800 mm Fork Width: 200 mm Fork Thickness: 60 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Bwsdpfx Ajz Ev U Ajntjw Front Tires Type: Pneumatic Front Tire Size: 355/65-15 Rear Tires Type: Pneumatic Rear Tire Size: 355/65-15 Battery Voltage: 120V Battery Capacity: 930Ah Battery Manufacturer: ` Battery Year: 2021 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive rates are always possible. We are also happy to purchase your used equipment outright, even if you do not acquire a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice about this EGX60/16/75TR. P.S.: Our in-house forklift master workshop specializes in repair, overhaul, refurbishment, and custom builds for forklifts from 8 tons upwards. We can also offer your vehicle for commission sale at our premises. Fork Positioning System, 1x NIVO Fork; Fork carriage tilt; Fork positioner opening range: 465 / 1460 mm Heater, Full Cabin, Full Free Lift, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 14,027 h, load capacity: 5,000 kg, lifting height: 7,200 mm, free lift: 2,280 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, fork carriage width: 1,330 mm, fork length: 1,400 mm, empty load weight: 9,710 kg, total length: 4,550 mm, drive type: Diesel, construction width: 2,140 mm, Sideload forklift Load center: 700 Fork width: 200 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 355/45-15 Rear tires type: Superelastic Rear tires size: 355/45-15 Bwedpfx Aowx Syyontjw Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Leasing and financing are always available on attractive terms. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, is happy to provide detailed advice regarding this HX50/14/72TR. P.S.: Our master forklift workshop specializes in repair, servicing, overhauls, and custom builds for forklifts from 8 tons upwards. We can also offer commission sales for your vehicle. Heater, full cab, full free lift, Platform height: 820 mm; camera.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,938 h, load capacity: 4,000 kg, lifting height: 4,000 mm, free lift: 550 mm, fuel type: diesel, mast type: simplex, construction height: 2,860 mm, fork carriage width: 1,300 mm, fork length: 1,150 mm, empty load weight: 7,000 kg, total length: 4,550 mm, drive type: Diesel, construction width: 2,170 mm, Side loader Load center: 700 Fork width: 125 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 27x10-12 Bodjz Ewdrjpfx Anteww Rear tire type: Pneumatic Rear tire size: 27x10-12 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our Hamburg and Gdansk locations. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to purchase your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this HX40/14-13.5/40ST. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom construction of forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Pantograph: 1,350 mm Heater, full cab

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,622 h, load capacity: 6,000 kg, lifting height: 4,010 mm, free lift: 1,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,500 mm, fork carriage width: 1,300 mm, fork length: 1,300 mm, empty load weight: 9,600 kg, total length: 4,500 mm, drive type: Diesel, construction width: 2,200 mm, Side loader Load center: 700 Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Bwsdpfez Ev Uiex Antjw Technical condition: very good Front tire type: Pneumatic Front tire size: 3.00-15 Rear tire type: Pneumatic Rear tire size: 3.00-15 Description: In addition to this Fantuzzi model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are possible at any time. We are also happy to buy your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this SF60U. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and special construction for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for sale on a commission basis. Heater, full cabin, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,403 h, load capacity: 2,000 kg, lifting height: 5,500 mm, free lift: 1,780 mm, fuel type: electric, mast type: triplex, construction height: 2,422 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,846 kg, total length: 2,098 mm, drive type: Elektro, construction width: 1,120 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Bwodpoz Hgbpefx Antjw Mast type: Triplex Technical condition: good Front tire type: Non-marking Front tire size: 200/50-10 Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire size: 140/55-9 Rear tire condition: 20 - 40% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2018 Battery condition: 60 - 80% Description: Inspection and safety check recently performed Side shifter, fork positioner, 3rd valve, 4th valve, front work light, roof protection, windshield, half-cab, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cab, full free lift, interior mirror, LED, 2-pedal operation, joystick (Duo-Pilot), comfort seat, panoramic rearview mirror, multi-color display, optional button panel, floor spot light front + rear, electric steering, electric brake, driver's door missing, battery can be regenerated upon request (for an additional charge).

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,175 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 1,801 mm, fuel type: diesel, mast type: triplex, construction height: 2,570 mm, fork carriage width: 1,120 mm, fork length: 1,800 mm, empty load weight: 5,573 kg, total length: 2,783 mm, drive type: Diesel, construction width: 1,320 mm, Electric 4-wheel forklift Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tire size: 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.5-10 Rear tire condition: 60 - 80% Description: Inspection and safety check recently completed Side shifter, Bodpfe Ahuxlex Antjww 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, half cab, heater, load guard, soot filter, compliant with STVZO (German Road Traffic Licensing Regulations), full cab, full free lift, safety light, safety pilot, interior mirror, joystick, single-pedal operation, LED, 1-pedal operation, joystick (Solo Pilot), comfort seat, multi-color display, panoramic rearview mirror, reversing warning, flashing beacon, engine: 43.2 kW Kubota

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 20,809 h, load capacity: 25,000 kg, lifting height: 4,060 mm, fuel type: diesel, mast type: simplex, construction height: 3,800 mm, fork carriage width: 3,050 mm, fork length: 2,340 mm, empty load weight: 34,800 kg, total length: 6,300 mm, drive type: Diesel, construction width: 3,050 mm, Diesel forklift Bwsdpfoz Ev T Esx Antjw Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG 250-12LB. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We also gladly offer consignment sales for your vehicle. Side shifter, fork positioner, Heater, full cabin, scale.

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 8,000 kg, lifting height: 3,020 mm, fuel type: diesel, mast type: simplex, construction height: 2,700 mm, fork carriage width: 2,000 mm, fork length: 1,600 mm, empty load weight: 11,700 kg, total length: 4,000 mm, drive type: Diesel, construction width: 2,050 mm, Diesel forklift Load center: 900 Fork width: 150 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 8.25-15 Rear tire type: Superelastic Rear tire size: 8.25-15 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCF80-9. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. Side shifter, fork positioner, Bedpfxoz Evq Ds Antsww Heater, full cab.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 18,299 h, load capacity: 8,000 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,700 mm, fork carriage width: 2,030 mm, fork length: 2,400 mm, empty load weight: 11,720 kg, total length: 4,150 mm, drive type: Diesel, construction width: 2,050 mm, Diesel forklift Load center: 900 Bwedpsz Ev S Ijfx Antew Fork width: 150 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 8.25-15 Rear tire type: Superelastic Rear tire size: 8.25-15 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to purchase your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCF80-9. P.S.: Our forklift master workshop specializes in repair, refurbishment, overhaul, and custom builds for forklifts from 8 tons and up. We would also be happy to offer your vehicle for consignment sale at our location. Side shifter, fork positioner, Heater, full cabin

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 17,204 h, load capacity: 15,000 kg, lifting height: 3,530 mm, fuel type: diesel, mast type: simplex, construction height: 3,420 mm, fork carriage width: 2,500 mm, fork length: 1,600 mm, empty load weight: 18,400 kg, total length: 5,055 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 80 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing options are available at favorable terms. We are also happy to buy your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG 150-6. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment. Bodez Ev Tlspfx Antsww Side shifter, fork positioner Fork positioner opening range: 645/2310 mm Heater, full cab Camera