Used Banding Machine for sale (65,030)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Gjdewkba Tepfx Anxeit Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill Giedowka S Iepfx Anxet - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Gsdpfxewka H Ss Anxeit Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Colour: Grey Weight: 2.000 kg Price: On request - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: At10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gjdpfxjyrpmce Anxeit Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Colour: Grey Weight: 2.000 kg Price: On request - Details: - └ Description: Shaft of the drive rollers is loose with the machine Gsdpfx Asym Rt Hjnxeit - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: AT10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, functionality: fully functional, UHLMANN E 3025 STRETCH BANDING MACHINE Gijdpfx Anoy Sgi Aoxot Used banding machine for end-of-line packaging, like grouping and wrapping cartons into stable bundles for downstream handling, case packing or distribution. For fields where reliable carton bundling is required, like pharmaceutical, nutraceutical and healthcare. - Year of construction: 2004 - Size: 1,600 mm L x 1,400 mm W x 2,000 mm H (approx) PRODUCTION - Output: up to 30 bundles/min (max) - Infeed capacity: up to 300 cartons/min - Film reel diameter: 300 mm (max) - Carton size: 130 x 105 x 250 mm (max) - Bundle size: 300 x 250 x 400 mm (max) ENERGY USE - Rated current: 4.5 A - Rated voltage: 3/N/PE AC, 400V, 50Hz - Back-up fuse: 25 A

Condition: excellent (used), Catalogue number 7963 TECHNICAL DATA Equipment: - disc - heating strip - guillotine - glue tank (granulate) - tape feeder - guillotine - 3 pressure rollers - finishing unit with saw blades - 2 milling units for edge profiling (radius cutters) - scrapers – for removing excess glue - 2 polishers - workpiece thickness 10-60mm - edge band thickness 0.4-5mm - pull-out support table - feed speed 9m/min - total power 5.5kW - extraction port diameter 120mm - dimensions (L/W/H) 3100/1080/1470mm - weight 670kg ADVANTAGES – DTR technical documentation – not repainted – Austrian manufacture – year of production: 2010 – perfect condition – used edgebander Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In the case of larger exchange rate fluctuations, the price may change) Gsdpoyzy D Sjfx Anxeit

Condition: new, Catalogue No.: HZ014 – Pre-milling – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Godpfeyy Nf Aex Anxoit Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW Godpfx Aeyg Ecvsnxoit - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: used, Storage location: Sonnefeld Godpfjway Dcjx Anxjit

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Gisdpfsvvkd Tox Anxst

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Gedpfx Asvvkfdenxoit

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Gsdovvkfqepfx Anxeit Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Giodpfx Aevvkfwonxst Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Gjdpfx Ansxyiilsxeit Storage location: Nattheim

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Storage location: Nattheim Gedpfjymcrbex Anxeit

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Gijdpfxoy Rq Uao Anxot Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60T/min Coolant:150-300 I/min Tooth pitch: 10 - 60 mm Tooth height: 0 - 30 mm Tooth angle: 0 - 40° Sharpening speed: 0-60 teeth/min Grinding wheel: 300x30mm, 8 - 13mm thick Grinding wheel motor: 3.0 kW E-Motor Water tank volume: 265 liter

Condition: new, Year of construction: 2026, Model: Mechanical with touch panel Tooth profiles: All common tooth profiles Blade width: Band saws up to 230mm Gedpfx Ajy Rq Tvjnxeit Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Clamping angle: 0 - 40°

Condition: new, Year of construction: 2026, Model: Mechanical or CNC with touch panel Circular saw with stellite or alternate set teeth Sharpening in one pass with a large amount of water!! Tooth profiles: All standard tooth profiles Giodpsy Rq Tpofx Anxot Blade diameter: Circular saw blades up to 1000 mm Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Clamping angle: 0 - 40°

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60 Z/Pm Coolant:150-300 l/min Tooth pitch: 10 - 60 mm Tooth height: 6 - 30 mm Tooth angle: 0 - 40° Giodpfx Aoy Rq Tijnxst Sharpening speed: 6 - 10 teeth/min Grinding wheel: 300x30mm, 8 - 13mm thick Grinding wheel motor: 2,8 kW E-Motor Water tank volume: 165 liter

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Godpfx Aew Aig Sonxsit

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm Giodpfow S Dmdex Anxet 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Gjdey N Ukiepfx Anxeit

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, Gedpfx Anju R S Nwsxjit feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), functionality: fully functional, Single-sided edge processing line HOMAG with feed speed up to 32 m/min, precise workpiece positioning with a rolling block chain (instead of standard chain), extended mechanization, fully automatic workpiece infeed WZ14, with belt sanding unit for solid wood edges. Comprises: Edgebanding and sizing machine HOMAG, type: PROFI KFL350/13/A3/WZ Loading station / infeed table HOMAG POWER TBL100/30/30/S Godpfewvlhlox Anxoit Return system / BOOMERANG LIGMATECH, type: ZHR 30/L/185/F