Used Bandsawblade Sharpener for sale (493)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 20907, feed length X-axis: 380 mm, feed length Y-axis: 280 mm, feed length Z-axis: 280 mm, swivel angle A-axis (max.): 360 °, swivel angle C-axis (max.): 340 °, Spindle replaced about 6 years ago - only 8,000 spindle hours! TECHNICAL DETAILS Control: Fanuc GE 160 i Length: 950 mm Width: 310 mm T-slots: 3 x 14 mm Gijdpfjwi Nc Hox Aldju Grinding head, grinding spindle Spindle type: Motorized swiveling Drive power: 7.5 kW Speed range: 0 - 9,000 rpm Wheel mount: HSK 50 Wheel diameter: 50 - 200 mm Max. number of wheels: 6 Axes Travel X / Y / Z: 380 / 280 / 280 mm Rapid traverse X / Y / Z: 20 / 20 / 10 m/min Resolution X / Y / Z: 0.0001 mm Drive power X / Y / Z: 1.0 kW, 3 Nm C-axis swivel angle: 340° Rapid traverse: 66°/s Resolution: 0.001° Drive power: 1.0 kW, 3 Nm Rotational axis A: continuous Rapid traverse: 167°/s Resolution: 0.001° Drive power: 0.5 kW, 2 Nm Mounting cone: ISO 50 Spindle height: 210 mm MACHINE DETAILS Width: 1,590 mm Depth: 1,930 mm Height: 2,250 mm Weight: 5,500 kg Noise level: < 70 dB(A) according to DIN 45 635 Operating hours: approx. 30,000 h / approx. 8,000 h since spindle replacement Power supply Motor power: 7.5 kW Connected load: 33 kVA Voltage: 3 x 400 V AC Hydraulics Type: DMR 300 Principle: Gear pump Drive: Electric motor Voltage: 3 x 230/400 V Filling volume: 11 L Pendulum volume: 4 L Flow rate: 2.8 L/min Operating pressure: max. 98 bar Pneumatics Type: CFG 301 Machine air consumption: approx. 2,000 l/h Measuring system air consumption: approx. 3,000 l/h Air consumption: approx. 1,000 l/h Fire extinguishing system: yes Working pressure: 6 bar Maintenance: Maintenance-free, except for the filters Air quality: according to DIN ISO 8573-1 Central lubrication Type: CFG 012 Principle: Gear pump Drive: Electric motor Reservoir capacity: 30 bar Pressure limitation: 0.2 l/h Flow rate: 0.2 l/h Ambient temperature: +10°C to +40°C Protection class: IP 54

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Gedpfx Aeurkypjldsiu Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: excellent (used), Year of construction: 2019, operating hours: 19,200 h, functionality: fully functional, machine/vehicle number: 90514 2019, saw blade diameter: 710 mm, tooth pitch: 55 mm, grinding wheel diameter: 200 mm, total width: 2,662 mm, total length: 2,540 mm, total height: 2,640 mm, type of input current: AC, input current: 10 A, input frequency: 50 Hz, disc diameter: 200 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 3,000 W, saw blade width: 8 mm, input voltage: 400 V, overall weight: 3,200 kg, saw blade bore: 80 mm, power: 10 kW (13.60 HP), grinding diameter: 710 mm, workpiece diameter (max.): 710 mm, Equipment: rotational speed infinitely variable, CNC saw blade sharpening machine with chip divider grinding device and saw blade magazine up to D=560mm for unmanned operation. In manual mode: 40-710mm. Saw blade magazine with 3 mounting arbors. Oil filtration system suitable for HSS and carbide (HM), oil cooler brand Polar 2.9. Tooth profiles for HSS: Form A, B, BW, C, and special profiles. TK saw blades can be ground in diameters from 200-500mm. The fire extinguishing system is an oil retrofit kit with aerosol extinguishing generator. Equipped with electrostatic air extraction. Gisdpfx Ajxuq I Eoldeu

Condition: excellent (used), Year of construction: 2011, operating hours: 31,648 h, functionality: fully functional, machine/vehicle number: 90265 2011, saw blade diameter: 710 mm, tooth pitch: 55 mm, grinding wheel diameter: 200 mm, total width: 2,662 mm, total length: 2,540 mm, total height: 2,640 mm, type of input current: AC, input current: 10 A, input frequency: 50 Hz, disc diameter: 200 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 3,000 W, saw blade width: 8 mm, input voltage: 400 V, overall weight: 3,200 kg, saw blade bore: 80 mm, power: 10 kW (13.60 HP), grinding diameter: 710 mm, workpiece diameter (max.): 710 mm, Equipment: rotational speed infinitely variable, CNC saw blade sharpening machine with lateral tooth divider grinding device and saw blade magazine for blades up to D=560 mm for unmanned operation. In manual mode: 40–710 mm. Saw blade magazine with 3 holding arbors. Oil filtration system for HSS, oil cooler brand Polar 2.9. Tooth geometries HSS: Form A, B, BW, C and special tooth forms. Saw blade holders for manual loading D=75 to 250 mm and D=40 to 100 mm. Special program for grinding variable tooth pitches. CAD program for creating up to 250 custom tooth shapes. Fire extinguishing system is an oil retrofit kit with aerosol extinguishing generator. With electrostatic air extraction. Gedpfxox Tct To Aldeiu

Condition: excellent (used), for grinding saw blade diameters from 30 up to max. 300 mm Grinding wheel diameter 150 mm, lots of accessories Giodpfx Ajycqmljldou good, well-maintained condition Operating manual is available

Condition: new, Year of construction: 2025, Sharpening of woodworking tools The Profi Firmer ( piercing bag) and Planer knife grinding machine WOOD TOOL GRINDER WTG -1 - "Swiss quality" For an accurate and efficient work perfectly honed, razor-sharp cutting edge is a must. With our grinder to sharpen your tools " wood chisel (holly bag) , planer knives , chisels , chisel " , fast, easy , accurate and inexpensive ... Currently, the absolute cheapest PROFESSIONAL wooden tool grinder on the market! Made in Switzerland Swiss Quality = Where the WOOD TOOL GRINDER is " WTG -1" used? • Wherever conventional wood is processed. • For example, in carpentry , joinery , • Carpeting , schools, trade schools , • schools / training workshops ... Base machine price : EUR 2050.00 (ex works , excl 8.0 % VAT) Gisdjb Dt Ixepfx Aldju You win and this several times ! If you regrind a wood chisel or a hand planer blades by hand or with an " older machine " experienced artisans need 5 min or more per tooth , if not even longer and get a good result ! With the WTG you need just about 30 seconds per tool . In no time you grind even a whole set of tools. And that, too, without having any special knowledge or grinding years of experience . So the machine can pay for itself relatively quickly. But above all, can be obtained every year , high , variable costs for tools and grinding work to a minimum . Once in possession of a WTG machine, you just have to work with perfectly cut tools , which has a positive impact among others on the quality and speed of operation. Go with the time ... go with BERGER technology GmbH. Your direct contact persons : Grinding Technology : Marc Broennimann Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: good (used), Weinig Rondamat R960 Gjdpfx Aljwzu N Aedjiu Year of manufacture: 2002

Condition: used, TECHNICAL DETAILS - Number of axes : 5 LINEAR AXES - X stroke : 400 [mm] - Y stroke : 250 [mm] - Z stroke : 250 [mm] - Rapid traverse rate : 24 [m/min] - Resolution : 0.0001 [°] GRINDING WHEEL HOLDER HEADSTOCK VERTICAL - C axis : 225 [°] - angular resolution : 0.0002 [°] - Spindle speeds : 12.000 [rpm] - Tool type : HSK-50E - Spindle power : 15 [kW] PART-HOLDER HEADSTOCK - Rotational speed range (rotary axis) : [rpm] - Rotation speed range (universal rotary axis) : [rpm] - angular resolution : 0.0001 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS Gsdpowwa Ddjfx Aldsiu - Machine floor space : 2.050 x 2.100 [mm] - Machine height : 1.960 [mm] - Machine weight : 2800 [kg] EQUIPMENT - CNC : SIEMENS SINUMERIK 840D - Lubricating tank with pump * with cooling unit for coolant - Oil mist extractor : ABSOLENT ODR 2000

Condition: used, Sharpening machine CINCINNATI AS Gsdpfx Aeuhbnbjldjiu

Condition: used, Sharpening machine CINCINNATI AS Gedpfxeuhbm Rs Aldsiu

Condition: used, TECHNICAL DETAILS - Axes : 5 - Max. tool diameter : 150 [mm] - Max. tool length with manual loading : 300 [mm] - Max. tool length with auto loading : 140 [mm] - Max. tool weight : 25 [kg] WORKHEAD (A-AXIS) - Attachment : ISO 50 - Strokes X/Z : 360 / 300 [mm] - Stroke : 360 [°] - Max. speed : 800 [r/min] WHEELHEAD (B-AXIS) - Attachment : HSK-E40 - Stroke Y : 200 [mm] - Stroke : -30 / +180 [°] - Max. wheel diameter : 125 [mm] - Max. speed : 20.000 [r/min] - Power : 7 [kW] WHEEL MAGAZINE - Number of positions : 4 TOOL MAGAZINE - Type : using the linear axes, with Schunk collet - Tool length : 40 – 140 [mm] - Tools Ø4-6 per pallet : 200 - Tools Ø6-10 per pallet : 96 - Tools Ø6-16 per pallet : 54 ELECTRICS - Main voltage : 400 [V] - Total power : 19 [kW] Gedpfouhbzuox Aldeiu DIMENSIONS - Floor space : 2.200 x 3.350 [mm] - Height : 2.600 [mm] - Weight: 2.500 [kg] EQUIPMENT - CNC : NUM AXIUM Power P2 - Software : Easygrind 6.08 - Linear scales upon X/Y/Z : HEIDENHAIN - Spindle cooling unit - Coolant tank with pump : 10 [bars] * with retractable nozzle - Mist suction unit : ELBARON RON/A 100 DV - Airblow upon tool - Fire estinguisher (to be checked buy the buyer through a specialist) - Number of wheel supports : 12 - Number of pallets : 4 - 1 collet chuck ISO50 with auto clamping - 1 collet chuck ISO50 with manual clamping, capacity Ø : 32 [mm] - 1 collet chuck ISO50 with manual clamping, capacity Ø : 20 [mm] - 1 MASTER calibration device for self-calibration of axes and probe

Condition: used, TECHNICAL DETAILS - Number of axes : 5 LINEAR AXES - X stroke : 400 [mm] - Y stroke : 250 [mm] - Z stroke : 250 [mm] - Rapid traverse rate : 24 [m/min] Gijdpfewwa Dkox Aldou - Resolution : 0.0001 [°] GRINDING WHEEL HOLDER HEADSTOCK VERTICAL - C axis : 225 [°] - angular resolution : 0.0002 [°] - Spindle speeds : 12.000 [rpm] - Tool type : HSK-50E - Spindle power : 15 [kW] PART-HOLDER HEADSTOCK - Rotational speed range (rotary axis) : [rpm] - Rotation speed range (universal rotary axis) : [rpm] - angular resolution : 0.0001 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1980 x 1750 [mm] - Machine height : 1960 [mm] - Machine weight : 2800 [kg] EQUIPMENT - CNC : SIEMENS SINUMERIK 840D - Automatic loading and unloading system with 50 positions

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding length: 2,100 mm, type of input current: three-phase, input voltage: 400 V, grinding spindle motor power: 6 W, overall weight: 2,500 kg, Knife grinder for chipper knives, sawmill knives, industrial knives Reform AR21 51, with highly reliable automatic mechanical feed. Grinding motor with 6kW spindle-through coolant. Swivelling magnetic chuck, 2100 mm. Large coolant tank, 450 liters. Wheel support set, gluing kit included. Giedpfxexvy A Io Aldsu

Condition: good (used), Year of construction: 1989, overall weight: 1,050 kg, tooth pitch: 120 mm, total width: 1,850 mm, total length: 1,550 mm, total height: 1,800 mm, saw blade diameter: 800 mm, grinding wheel diameter: 175 mm, input voltage: 380 V, type of input current: three-phase, saw blade bore: 10 mm, saw blade width: 16 mm, input frequency: 50 Hz, We offer this good Vollmer Finimat beta sharpening machine, year of construction 1989. Use of one grinding head in combination with two diamond wheels for face and top. Triple chip tooth configuration can be ground in one revolution of sawblade. Saw blade diameter: 100-800 mm Bore size minimum: 10 mm Tooth pitch: 8-120 mm Blade thickness maximum: 16 mm Rake angle range: -20 to +30 degrees Gedpfx Alox Saw Tsdoiu Top clearance angle range: +5 to +25 degrees Bevel angle (face) range: 0 to +15 degrees Bevel angle (top) range: 0 to +45 degrees Tooth height differential range: 0 to 1 mm Grinding wheel outer diameter options: 175 or 125 mm Grinding wheel bore diameter: 50.8 mm Maximum circumferential speed: 34 m/s Minimum circumferential speed: 25 m/s Voltage: 380 V Phase: 3 Frequency: 50 Hz Total connected load: 4.6 kW Machine width: 1850 mm Machine depth: 1550 mm Machine height: 1800 mm Net weight: 1050 kg Available April 2026 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Motor output 3 kW total power requirement 3 kw Giedsv Nq Skepfx Aldsu Weight 1.400 kg

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg Giedpfxexiv Ugs Aldju

Condition: new, Year of construction: 2025, functionality: fully functional, The ASM 6-30 is a high-speed tooth setter for band saw blades, making it perfect for companies that use different volumes of bandsaw / sawmill blades per day. The machine is very user-friendly and easy to set up, making it the ideal solution for a wide variety of customers with different experiences in the industry. Voltage - 220V Frequency - 50Hz Power - 220V Secondary voltage - 24V Blade width - 15mm-60mm Tooth pitch - 6-30mm Accuracy - +- 0.04mm Blade thickness - 1.2mm Possible types of tooth set - left, right,straight/right,left,straight The machine is very user-friendly and easy toset up, making it the ideal solution for a wide variety of customers withdifferent experiences in the industry. Achieving precise tooth setting isessential for straight cutting and extended blade life, and our advancedclamping system delivers an impressive accuracy of 0.04mm. Capable of setting80-120 teeth per minute, the ASM 6-30 enhances your company's efficiency andensures a smooth workflow. Giedpfxexivgce Aldeu

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI Gedpfx Alsqy Ek Ajdsiu

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1896.69 € 200 x 32 x 32 mm 1 kW 2550 1/min 42 mm 270 mm 470 mm 1050 mm 600x800x1350 mm 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation .: 317.774with machine stand, emergency stop pushbutton and brake OPTION (price on request): Footpedal as emergency stop Gisdpfx Alsy Ig N Iodsu ALTERNATIV MODELS: .: 317.762 table version .: 317.777 with machine stand with integrated suction, emergency stop pushbutton and brake

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm Gisdpfx Alezcdz Aedsu - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Knife grinder MVM model AF1000 with tilting magnet mm 1000 long Giedszcl Nzepfx Aldju

Condition: excellent (used), Year of construction: 2022, operating hours: 5,500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 1,750 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 60 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting width (max.): 1,750 mm, cutting height (max.): 60 mm, compressed air connection: 6 bar, Automatic conveyor cutting machine OROX ICUT C600, year 2022, in excellent working condition. Low hours of use. Complete package: - OROX ICUT C600, cutting area 180x175 cm, with all standard accessories - FLESE smart blade - COVER second film pressure device - POPS intelligent labelling/marking system - Spreading tables 12 m total (10 m with air flotation + 2 standard) Technical specifications: - Max. cutting height: 6 cm (compressed lay) - Max. cutting speed: 60 m/min - Axis speed: 120 m/min, acceleration 0.8 G - Power: 19 kW max / 8-9 kW average consumption - Supply: 3-phase 400V 50Hz - Compressed air: 150 L/min at 6 Bar - Weight: approx. 2,700 kg - OS: Windows 10, Intel i5 Features: EVAS electronic vacuum system, RIVER SYSTEM continuous cutting, laser zone positioning, automatic diagnostics, wireless/LAN data transfer, CAD interface ISO/DXF, automatic table cleaning, blade sharpening system. Suitable for: fabric, synthetic leather, foam, upholstery, laminated materials, technical textiles. Location: Kaunas, Lithuania (EU). Available for inspection by appointment. Gsdpfxjzb U Hme Aldoiu

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle electrically adjustable up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm Gisdpfx Aloy Ux Dqedou - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1054, grinding length: 400 mm, grinding width: 150 mm, Table length: 400mm Table width: 150mm Maximum cutting length: 400mm Maximum grinding width: 150mm Maximum workpiece weight: 75kg Distance spindle to table: 400mm Table speed 1-24 m./min. Sharpening stone diameter: 25mm Spindle speed: 900 – 4500 rpm. Gedpfx Alor Eq U Sjdsiu Year of construction: 1979

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, overall weight: 520 kg, input voltage: 400 V, space requirement height: 1,760 mm, space requirement length: 1,100 mm, space requirement width: 800 mm, nominal power (apparent): 2 kVA, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 Gedpfxjxdkw Sj Aldjiu x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.