Used Barb Wire Machine for sale (65,710)

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! Hjdpfeik Hb Tex Agweni We do not know what is the probleme!

Condition: refurbished (used), Year of construction: 2010, operating hours: 9,563 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,100 mm, total width: 2,800 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 4,440 kg, table length: 950 mm, GF CUT30P - 2010. Available for inspection at our premises in Semsales (Switzerland). Viewing by appointment. More information upon request. Hnedpfxsyazkce Agwei

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm Hnjdpfjx Hghujx Agwji incl. chiller Automatic wire threading Water bath

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Hodpfx Aexfaqksgwsni Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Hnjdpfx Aow Ucyujgwsi Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Hsdpfx Agjwqgh Aswjni Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Tank Dimensions: W 790 x D 590 x H 320mm Max. electrode weight: 50 kg Max. Table Load: 550 kg With: Magnetic chuck 350 x 250mm

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 6.0138, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 462 mm, table load: 800 kg, controller model: CHARMILLES ROBOFIL 6020 SI, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to the closure of a business. Bidding commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel Paths Travel X-axis: 630 mm Travel Y-axis: 400 mm Travel Z-axis: 462 mm Travel U-axis: ±50 mm Travel V-axis: ±50 mm Workpiece Max. workpiece dimensions: 1,260 x 685 mm Max. workpiece height (immersed): 200 mm Max. load capacity: 800 kg Max. workpiece height between feedthroughs: 360 mm Measuring resolution: 0.5 µm Maximum manual speed: 15 mm/s Hnedpexqallsfx Agwoi Wire unwind speed Tension, taper offset Maximum workpiece height for wire threading: 300 mm Work tank dimensions: 1,355 x 760 x 425 mm MACHINE DETAILS Control: CHARMILLES ROBOFIL 6020 SI Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,700 x 2,900 mm Weight: 4,000 kg Electrical Details Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 18 A EQUIPMENT Includes matching workshop drawer cabinet with accessories and documentation

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Hnodpfx Agov Tpnrowji Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Hedpfor Nfvmjx Agwoni Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Hnjdpfxon Ut A Se Agwei Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: 1997

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Hnodomqk Tpepfx Agwei Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw

Condition: excellent (used), Year of construction: 2015, operating hours: 5,090 h, functionality: fully functional, machine/vehicle number: T0298, workpiece weight (max.): 850 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 245 mm, workpiece length (max.): 670 mm, type of input current: three-phase, table width: 960 mm, input frequency: 50 Hz, Equipment: cooling unit, The Sodick VZ500L is a wire-cut EDM (Electrical Discharge Machining) machine from Sodick, designed for electro-erosive machining of metals. This is a wire-type machine equipped with linear drives, enabling precise cutting of intricate shapes at an angle based on CAD files (e.g., DXF, STEP, IGES). Main features: Type: Wire-cut EDM Manufacturer: Sodick Model: VZ500L Drives: Linear Working range (X x Y x Z): 500mm 350mm 250mm Hnodex Ekcyopfx Agwsi Maximum workpiece dimensions: 960mm 670mm 245mm Maximum workpiece weight: 850 kg Capabilities: Angular wire cutting (based on 3D models) Additional features: Automatic wire feeding (AWF) Immersion in dielectric fluid

Condition: used, Year of construction: 2000, operating hours: 70,000 h, Manufacturer: TBE BUTLER Model: TBE MULTIBEND Fully documented, available for inspection and verification! Hnjdpfx Agexclfhewoi Wire diameter range: 1.0 mm to 10.0 mm 8 servo axes as standard – optionally up to 24 axes Integrated program memory Independent eyelet station Tilt control at the bending heads Servo indexing unit for 3D rotation Automatic part rotation for multi-level bending Modular tools – quick changeover times Integrated decoiler Complete diagnostic and fault-tolerance systems Touchscreen programming controls – Allen-Bradley®

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Hedpewtd Edofx Agweni

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Hnedpfoxx Uatox Agwsi Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 3,300 kg, warranty duration: 6 months, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Hjdpfxsxwktms Agwoni Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Manual tank door (accessible from one side) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete unit: 2600 x 2600 x 2340 mm Total weight of the unit: 3,300 kg The machine will be cleaned, fully overhauled, and functionally tested by us after the order is received. You will receive a 6-month warranty on the machine. We are happy to offer you commissioning of the machine.

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Maximum Inlet Wire's Diameter: 30 mm Hnedpfxet Ixkze Agwoi

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Vertex 2 Year of manufacture: 2007 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.05 µm Ra Available wire diameters: 0.07 - 0.33 mm Hnsdpfoxwb Stex Agwji Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB interface The machine will be cleaned, overhauled, and tested by us upon receipt of order. Commissioning and training can also be offered on request.

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Year of construction 2003. X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Workpiece length: 750 mm. Hodju Tq Hwspfx Agweni Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Machine weight approx. 2600 kg.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Hjdsx I Akujpfx Agweni Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece weight (max.): 200 kg, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 2,455 mm, total length: 3,000 mm, total width: 3,760 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, type of input current: three-phase, overall weight: 3,700 kg, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, Equipment: cooling unit, documentation/manual, Wire EDM system GF AgieCharmilles CUT 2000 with loading robot Hnodpjx S Ehkofx Agwji Power on time: 91,716 h Operating hours: 17,889 h The system consists of a CNC wire EDM machine GF AgieCharmilles CUT 2000 with integrated automation/loading robot (WorkPartner) and is ideally suited for precise series and single-part production. The CUT 2000 is designed for highly accurate contour cutting with excellent surface quality and stable process control. It features the Vision-5 control unit (Windows XP), automatic wire threading system, integrated dielectric unit, and coaxial flushing, enabling reliable, low-manned operation. The loading robot (GF WorkPartner) transforms the machine into an automated production cell. Depending on the magazine version, workpieces weighing approximately 400 to 800 kg in total can be handled. Automatic loading and unloading allow for extended run times without operator intervention and significantly increase productivity.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 03DR2150, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, overall weight: 3,500 kg, Equipment: cooling unit, Wire-Cut EDM Machine The machine comes from productive operation and is in fully functional, used condition. All relevant assemblies are complete; the generator cabinet, control system, wire feed, and AT system (Automatic Threader) are all present and complete. Running times according to control system: Processing time: approx. 29,062 h NC on-time: approx. 43,836 h Ready-/TFT downtime: approx. 8,966 h Maintenance records (excerpt): Filter change: last performed at 176 h / 200 h Resin change: 21 h / 1000 h Oil refill: 742 h / 1000 h Conductivity sensor: 742 h / 1000 h Current supply rotation: 57 h / 80 h The machine is complete but shows typical signs of use after more than 10 years in operation Accessories are extensive and well organized Servicing always confirmed as per control system Automatic threading system included Accessories / Equipment: Original Mitsubishi nozzle & roller/bearing kit: various guide rollers upper and lower diamond guides nozzle set (upper/lower nozzle) drying stones / assembly tools NSK/Japan replacement bearings spare tension rollers Manufacturer’s wooden box Mitsubishi Electric Spare and consumables: resin container (packed) filter elements quick adhesive components A/B pH test strips process chemicals (for EDM) logbook / maintenance records Documentation / manuals: complete folders: Operator’s Manual MV Part 1 & 2 training materials “Advance Series” operating instructions (German) maintenance and AT maintenance sheets Travels (X / Y / Z): 600 × 400 × 310 mm Working table / workspace: table size: 840 × 640 mm (square table) max. workpiece dimensions: 1050 × 800 × 295 mm max. workpiece weight: 1,500 kg Wire data: wire diameter: 0.1–0.3 mm max. wire feed: 23 m/min tension: 0.5–25 N automatic threading (AT), including fine-threading Taper cutting: opto-linear T/C device, ±75 mm (X/Y), max. taper angle 15° at 260 mm workpiece height Generator / Control system: transistor-controlled pulse generator 15" LCD touch control 6-axis simultaneous control integrated 2D and 3D CAM (Parasolid viewer) NC memory up to 1 GB Hnsdpjx Hadvofx Agwsi USB interfaces (2×) Dielectric system tank capacity: 860 l filter flow rate: 50 l/min paper filters (2 pcs) resin container 10 l (ion exchanger)

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter: 0.07 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handbox for convenient machine setup 15" LCD color screen with lift-up keyboard and mouse AGIEVISION control Includes AGIESETUP 3D Includes AGIEDUO twin-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg Hnsdpfoxq Akwex Agwei The machine is cleaned, completely overhauled, and thoroughly tested by our specialists. We are happy to set up the machine at your location and provide thorough training on both operation and control.

Year of construction: 2007, condition: excellent (used), Makino SP 43 CNC control MGW-R Travels X: 450 mm Y: 300 mm Z: 320 mm Hedpfsiv H Dqjx Agwsni U/V axis: +/- 101 mm table: 730x580 mm tub: 890x850 mm max.workpiece weight: 900 kg dimensions approx: LxWxH 3000x3000x2300 mm weight approx: 3400 kg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2758, TECHNICAL DETAILS Travel paths X / Y / Z: 600 / 400 / 300 mm Cutting capability: H/W 30°/45° (30/45° instead of 15° for 0.25 mm wire) Control unit: MITSUBISHI M700 Control software: MITSUBISHI ELECTRIC “ADVANCE Plus” Replacement of X and Y linear scales: November 2022 MACHINE DETAILS Total weight: 3,500 kg Overall length: 2,687 mm Overall width: 3,030 mm Overall height: 2,150 mm Input voltage: 400 V Input current: 50 A Type of current: Three-phase Input frequency: 50 Hz EQUIPMENT - ODS optical drive system - Direct drive motors for the X and Y axes - Linear scales on the X and Y axes - Intelligent automatic wire feeding system (wire diameter 0.1–0.3 mm) - Wire straightening unit - Automatic wire cutter (for thicker wires) - Automatic hole detection - 3D CAD/CAM control - 5 controlled axes + preparation for additional axes - PFC precision machining (Precise Finish Circuit) Hnsdpfx Ajwr Aclsgwoi - LLS longevity system - 10 kg wire spool holder (reel) - U-shaped, hardened, segmented receiving table - Compressor dielectric (water cooling) - Preparation for remote communication (mcAnywhere) - CE version - Clear display of main functions on the screen - Programming with ESPERADVANCE interactive dialog system - Control unit prepared for receipt of 3D files - Graphical inspection: 3D, front view, side view, top view - Handheld control device - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)