Used Barbed Wire Machine for sale (85,528)

Condition: used, machine/vehicle number: 7160, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Typ / Model 781/1Q50R Serial-No. 7160 Armlänge / Arm length 55cm Fußpedal / Foot pedal Online-Video-Inspection by Skype-Video Kedpfeiiilmsx Aansfa We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,751 h, functionality: fully functional, drawing speed: 20,000 mm/s, wire diameter (max.): 3 mm, Wire drawing machine with integrated steel fiber machine (Type: MBK-8/8 x 450 + ISFM) TECHNICAL DETAILS Number of coil uncoilers: 2 Wire drawing machines: 2 Steel fiber machines (integrated): 2 Cooling system (liquid): 1 unit General information Control system: Siemens PLC Operator panel: Siemens touch panel, Display: Waintek Total power including coiler: 150 kW Power supply: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Wire drawing system Input wire diameter: 2.2 – 3.0 mm Output wire diameter: 1.0 mm, 0.7 mm Drawing speed: 10 – 20 m/s Number of drawing blocks: 8 Jog speed: 1 m/s Diameter of all capstans: 450 mm Motor power per capstan: 18.5 kW Total cooling water consumption: approx. 17 m³/h at 2–3 bar Water temperature: 20–30 °C Compressed air requirement: 5 bar Kodpfx Aewmnhveanofa Cooling: Water (for matrix, capstans, blocks, and nozzle holders) Equipment: Drawing die holder Adjustability: Adjustable in all directions (up, down, left, right) Integration: Combined with soap box Die housing: 43 x 27 mm Sensors and measurement technology Sensor arm: Analog sensors Length measurement: Shaft encoder for length and speed measurement Cooling Cooling medium – matrix: Water Cooling medium – drawing blocks: Water Water consumption: approx. 17 m³/h Water pressure: 2–3 bar Water temperature: 20–30 °C Water inlet: Left side of the machine Water outlet: Right side Machine side Compressed air Compressed air requirement: 5 bar Drives Motor type: AC motors with IP55 protection Speed control: Frequency converter from Control Techniques Motor power per drawing block: 18.5 kW Motor for matrix holder: 0.3 kW Control system Control system: Siemens PLC Control unit: Industrial-grade touch panel (Siemens) Electrical cabinet Construction: Sheet metal housing with high protection rating Cooling: Air-cooled Protection rating: IP55 Electrical system Operating voltage: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Total power: 150 kW Color Machine body: Blue Moving parts: White Matrix holder: Black Control cabinet: White Integrated steel fiber machine (ISFM) Applicable wire diameters: 0.55 – 1.0 mm Production speed: 10 – 20 m/s (synchronized) with drawing line) Fiber types: Hooked, corrugated, flat (tool-dependent) Fiber motor power: 7.5 kW Fiber length: tool-dependent Packaging: Manually in bags or boxes on weighing pans Fiber tool: Specified per dimension MACHINE DETAILS Program runtime: 2,751 h _____ EQUIPMENT - Two MBK-8/8x450 wire drawing machines - Two ISFM integrated steel fiber machines - Two coil unwinders - One liquid cooling system - Drawing blocks with water-cooled capstans and high-speed flow - High-quality components: Siemens PLC, SMC pneumatics, SKF bearings - Weighing system with automatic fiber filling switchover

Condition: used, functionality: fully functional, Wire drawing machine COMPAC – model TR560 – 7 steps of drawing Raw material : low carbon hot rolled wire rod Input: from fi 5,5 mm output: 1,8 mm on the last step Speed: cca 15 m/s Diameter of blocks 560 mm (5 pcs with ceramics) Engine power - 41 KW Electronics: SANTERMO matrix cassette No. 1 rotating on a chain, others fixed with water for cooling 2 cassettes for washing the wire +1 rotating cassette (spare) +1 block (reserve) Complete with two mandrels for unwinding. We have complete documentation for the machine. The machines are in good condition, we used them for production and dismantled them at the end of last year. Kodpfxow Ephns Aanjfa

Condition: used, Year of construction: 2012, x-axis 350 mm y-axis 250 mm z-axis 256 mm U-axis +/-70 mm V-axis +/-70 mm dimension of workpiece 750 x 550 x 256 mm Working hours 29.559 h -edm hours 29559h Kfsdpowtr Dzofx Aanoa

Condition: excellent (used), Year of construction: 2017, Technical datas:   X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Kfedpfxjxazx So Aansa Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and Kfedpfx Aot Hxbksanja With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, machine/vehicle number: 19142, Wire Stiching Machine Polygraph 703 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kedpfxsh Axw Tj Aanefa

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Year of construction 2018 Kfjdpfjt I Dtnox Aansa Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 - 0.30 mm incl. KIT 50 option Incl. automatic wire changer AWC Water bath machine with automatic wire threader With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D Incl. glass scales for X- and Y-axis VISION 5 control unit 15" LCD color screen, lifting keyboard and mouse Incl. Conic-Plus option for improved taper Incl. Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine is completely overhauled and tested by us. An individual test cut is also possible. We also offer commissioning and on-site training for this machine.

Condition: good (used), Year of construction: 1998, Working area 500 x 350 x 250 (L x W x H), Kfodpfx Asha U I Djanea available with extensive accessories if required! Eroding wire 0,25mm - 10 pieces new spools available Filters and resin cartridges available Please ask if you are interested !

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 Kedexf I D Eopfx Aanjfa automatic wire threading can be seen in good working condition year 2002

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm Kfjdpfx Aajm Uyuxenja z 220 mm Wear-free tubular direct drive Water bath incl. cooler Automatic wire threading

Condition: used, Drahtheftmaschine - Wire Stitching Machine Polygraph 103Serial-No. 6875 Manuals Included Online-Video-Inspection by Skype-Video Kedpfx Aaoh Ax Ufjnjfa We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, AGIECUT Excellence 2F eCUT Year of manufacture: 2006 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.1 µm Ra Max. cutting rate in cylindrical cut: 300 mm²/min Available wire diameters: 0.07 – 0.33 mm Kjdpfx Aaswwr H Rensfa Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with 4x USB ports Includes AGIE-Setup 3D The machine has been cleaned, overhauled and thoroughly tested by our technicians. We are happy to offer commissioning and training as well.

Condition: used, Year of construction: 2011, machine/vehicle number: 4, Elektrische Hochleistungs-Schneidemaschine / High Speed Wire Cutting Machine RENZ HSC-EBaujahr / Year 12/2011 - Serial-No. 460007150.50107 Schneideleistung bis / Cutting capacity max. 3000 Stück/h Schneidelänge 3 - 99 Schlaufen, variabel einstellbar Cutting length 3 – 99 loops, variable adjustable Stückzahlzähler ja / Piece counter yes Verarbeitbare Durchmesser / Possible wire diameters 3/16" - 1 1/4" ( 5,5 - 32 mm ) Teilung / Pitch 2:1, 3:1, 4:1 Umrüstzeit von Durchmesser zu Durchmesser / Time required for diameter change 2 - 10 Min. Spannung Power supply / 230 V / 50 Hz Maße / Machine L110 x W82 x H100 cm Kedpfx Ajiit Ifeanjfa Gewicht / Weight gross 74kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress V4 Year of manufacture: 2008 Travel paths: X= 800 mm, Y= 550 mm, Z= 525 mm Travel paths: U= 800 mm V=550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and re-threading after wire breakage With automatic front door Includes AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine will be cleaned and overhauled upon receipt of your order. Kfodpfjwvqwrjx Aanea You will receive a 6-month warranty on all machine components. We are also happy to offer commissioning and training services.

Condition: used, Year of construction: 1999, machine/vehicle number: 45037, Drahtheftmaschine / Wire Stitching Machine Polygraph 703/1T1-head wire stitcher for block- and saddle stapling. Year 1999 - Serial-No. 21/4 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kjdpfx Aaeh Aygbonjfa On Stock Emskirchen / Nürnberg - Can be test

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total length: 1,640 mm, total width: 2,040 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, empty load weight: 2,580 kg, Equipment: documentation/manual, AGIECUT Progress 2 Year of manufacture: 2004 Travel path: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-Axis travel path: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG generator with power module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and thoroughly overhauled upon receipt of an order. A test cut with optimal surface finish is performed for final approval. We are happy to offer on-site commissioning and training. Kfsdpfxswvqk Ss Aanoa Optional: - Transport - Chiller unit - Clamping devices

Condition: used, Year of construction: 1991, machine/vehicle number: 91040170, 2 Head Wire Stitching Machine Hohner ACCORD 25/402-head wire stitcher for block- and saddle stapling Year 1991 - Serial-No. 91.040.170 Kfodon Apntopfx Aanja Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Ksdpogzv Scofx Aanjfa Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG high performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. We are also happy to offer you commissioning and training

Condition: used, machine/vehicle number: 8170126, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Typ / Model 781/1L75FR Serial-No. 8170126 Armlänge / Arm length 75cm Fußpedal / Foot pedal Kjdpfx Aajiiilqjnjfa Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Kfodpfx Aasm Amf Denea Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: used, Year of construction: 1992, machine/vehicle number: 190121, Wire Stitching Machine AGRAFIX BX1-head wire stitcher for block- and saddle stapling. Year 1992 - Serial-No. 190121 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kfodpfxoh Ayf Tj Aanja On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2007, condition: refurbished (used), GF AgieCharmilles Progress V3 Year of manufacture 2007 travels: X= 500 mm, Y= 350 mm, Z= 426 mm Travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG-V generator AGIEVISION 5 control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Ksdsmmfwuspfx Aanefa Net weight: 3460 kg The machine will be cleaned and overhauled by us after receipt of order. You will receive a warranty of 6 months on all machine parts. We are also happy to offer you commissioning and training

Year of construction: 2000, condition: refurbished (used), AGIECUT Challenge 3 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm travel U/V-axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.3 µm Average contour tolerance Tkm +/- 5 µm Available wire diameters: 0.20 - 0.33 mm Ksdpfjfdl N Iex Aanjfa Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable setup Including AGIESETUP 3D AGIEVISION Control AGIE HSS Generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg Including 6 months warranty; On request we can put the machine into operation and carry out a training on site.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, The GF AgieCharmilles CUT 30P, built in 2011, is a powerful and precise used wire EDM machine specifically designed for demanding machining applications in the metalworking industry. Thanks to state-of-the-art technology and intelligent control, the CUT 30P offers the highest cutting quality, low maintenance requirements, and an excellent return on investment. Main Features & Benefits: ✅ Large work area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1000 kg Travel paths: X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Conical machining up to ± 25° / 80 mm ✅ High-precision machining: Positioning accuracy thanks to glass scales Automatic wire tensioning for consistently precise cutting results Surface quality up to Ra < 0.25 µm ✅ Efficient wire system: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and rethreading 25 kg wire spool for long operating times ✅ Intelligent control & user-friendliness: Windows-based control with intuitive user interface 15" LCD display for easy programming DXF import & 3D graphic check for precise simulations ✅ Reliability & low operating costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust construction and durable wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – The perfect choice for precise and economical wire EDM! 📌 Our used machine, built in 2011, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability. 📩 Contact us for a customized quote or demonstration! We are also happy to offer commissioning and training on the machine. Kedpfxov S Ua Do Aanjfa