Used Barcode for sale (223)

Year of construction: 2022, condition: excellent (used), Tuttnauer T-Edge 10 W Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving tabletop autoclaves that offer high-speed, Class B performance. They save you time so you can focus on helping your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Fully automatic autoclaves that free up time for patient care. The T-Edge 10 and T-Edge 11 autoclaves operate continuously, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For safety and regulatory compliance, scan barcode data (including expiration date) during treatment for the patient record. Personalized username and password. Printouts for saving records (optional printer). Sophisticated data analysis functions with RPCR software Technical specifications Manufacturer: Tuttnauer Type: T-Edge Cycles: 232 Chamber dimensions (diameter x length): 250 x 460 mm Hedpfoyk Egiox Agwjfd Chamber volume: 23 liters External dimensions (depth x height x width): 480 x 500 x 580 mm Dish dimensions (depth x height x width): 421 x 189 x 20.5 mm Power supply: 230 volts Power consumption: 2200 watts Connections: 1 Ethernet port, 2 USB ports, Wi-Fi, integrated connection for automatic water supply and drainage Year of manufacture: 2022 Weight: 53 kg Technically flawless! There is only a small chip in the glass at the very corner, which is outside the active display area and does not impair visibility or operation in any way. New price €7400 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2021, condition: excellent (used), Tuttnauer T-Edge 10 W Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving tabletop autoclaves that offer high-speed, Class B performance. They save you time so you can focus on helping your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Hfjdpjyk Aamefx Agwjd Fully automatic autoclaves that free up time for patient care. The T-Edge 10 and T-Edge 11 autoclaves operate continuously, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For safety and regulatory compliance, scan barcode data (including expiration date) during treatment for the patient record. Personalized username and password. Printouts for saving records (optional printer). Sophisticated data analysis functions with RPCR software Technical specifications Manufacturer: Tuttnauer Type: T-Edge 10W Cycles: 245 Chamber dimensions (diameter x length): 250 x 460 mm Chamber volume: 23 liters External dimensions (depth x height x width): 480 x 500 x 580 mm Dish dimensions (depth x height x width): 421 x 189 x 20.5 mm Power supply: 230 volts Power consumption: 2200 watts Connections: 1 Ethernet port, 2 USB ports, Wi-Fi, integrated connection for automatic water supply and drainage Year of manufacture: 2021 Weight: 53 kg Original price: €7400 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4000 S PLUS Full Otomatik Servo Motorlu Çift Köşe Alüminyum Pvc Kesim Makinası, - It is a fully automatic controlled cutting machine designed to cut PVC and Aluminum profiles straight or angled with a double head Ø600 mm saw. - Hydro - Pneumatic Hydro - check controlled saw movement - Cutting Accuracy +/- 0.1 mm - High precision thanks to backlash-free gearbox - Automatically adjustable to two inward angles at 90 and 45 degrees - 15" Windows-based industrial PC Hfjdpfjramy Tex Agwed - Diamond saw 2 x Ø600 mm - Servo motor motion system - 21.5 cm saw exit distance and 70 mm x 3 profile cutting capacity - Hydro-check saw speed adjustment - 9.5 meter cutting feature - 90 degree wedge slicing feature - Multi-language support - Conveyor profile support unit - Motion-sensitive support arm - Profile support unit between cutting heads - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps OPTION - Barcode printer - Cutting list transfer via USB Memory

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 400 S Aluminyum Pvc Çift Kafa Kesim Makinası, • Complies with CE standards. • Cutting accuracy +/- 0.1 millimeter • Automatic adjustment to two angles: 90° and 45°. • Automatic slicing at two angles: 90° and 45°. • Touchscreen color panel display • Remote connection and technical support capability • 2 x 500 mm saw blades • With Ø500 mm saw blades, max 16.5 cm cutting depth and ability to cut 2 x 80 mm profiles • Adjustable saw speed • 6-meter cutting capacity • Block cutting feature • Unlimited language support • Unlimited measurement memory capacity Hsdpfx Asramvasgwefd • Conveyor right/left profile support unit • Profile support unit between cutting heads • Spray saw cooling system • 2 vertical clamps • 4 horizontal clamps • Air gun OPTIONS • Barcode printer • Cutting list transfer via USB memory stick • Hydro-pneumatic, hydro-check controlled saw movement

Year of construction: 2023, condition: new, Tuttnauer T-Edge 10 Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving tabletop autoclaves that offer high-speed, Class B performance. They save you time so you can focus on helping your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Fully automatic autoclaves that free up time for patient care. The T-Edge 10 and T-Edge 11 autoclaves operate continuously, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For safety and regulatory compliance, scan barcode data (including expiration date) during treatment for the patient record. Personalized username and password. Printouts for saving records (optional printer). Hfedpfx Ageykt Nxowod Sophisticated data analysis functions with RPCR software Technical specifications Manufacturer: Tuttnauer Type: T-Edge 10W Cycles: 0 Chamber dimensions (diameter x length): 250 x 460 mm Chamber volume: 23 liters External dimensions (depth x height x width): 480 x 500 x 580 mm Dish dimensions (depth x height x width): 421 x 189 x 20.5 mm Power supply: 230 volts Power consumption: 2200 watts Connections: 1 Ethernet port, 2 USB ports, Wi-Fi, integrated connection for automatic water supply and drainage Year of manufacture: 2023 Weight: 53 kg Original price: €7400 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2010, condition: good (used), Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until 02/2022 Advanced AE immunoassay technology Meet clinical needs with acridinium ester (AE) technology that provides the flexibility and sensitivity needed for new and innovative assays. Hfjdshr Rw Iepfx Agwod Comprehensive diagnostic clarification of various disease patterns thanks to a test menu with over 70 different assays. Simplified inventory management and reduced costs by using the same ready-to-use reagents on all ADVIA Centaur analysers. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded on the fly. Easier training and operation thanks to an intuitive, icon-based user interface. Less operator intervention as daily maintenance is low and the system does not need to be cleaned monthly or booted up daily. New and updated test definitions can be read in by the customer by simply scanning the 2D barcodes included in the usage information. Consistent, predictable turnaround time (TAT) and accuracy Up to 240 tests/hour for short turnaround time even during peak periods. Rapid prioritisation of emergency samples possible at any time thanks to a dedicated access (STAT port). Disposable pipetting tips prevent carry-over and contamination of samples. Automatically perform repeat and confirmatory testing for reactive hepatitis B surface antigen samples using Siemens Healthineers SMART algorithms. Direct connectivity Adapt to different sample volumes with easy connection to Aptio and VersaCell® X3 automation solutions. Efficient operation thanks to diagnostic IT including CentraLink® data management system Atellica Process Manager and Smart Remote Services for Diagnostics Direct pipetting from the automation solution through point-in-space technology. Shorter turnaround times for emergency samples thanks to a dedicated STAT port that allows front loading of emergency samples even when connected to an automation solution. Technical specifications Product specifications System type: Random access immunoassay system Throughput: Up to 240 tests per hour Time to first test result 18 minutes, further results every 15 seconds (method dependent) Method capacity on board: 30 test methods Indication groups§§ Allergy, anaemia, diabetes, fertility, hepatitis, HIV, immunosuppressants, infectious serology, cardiology, Bone metabolism, Liver fibrosis, Adrenal function, Oncology, Thyroid diseases, Sepsis, Therapeutic drug monitoring (TDM) Continuous operation Loading and unloading of samples and consumables at any time during continuous operation. This includes sample racks, emergency samples, reagents, ancillary reagents, reaction cuvettes, sample tips, calibrators, controls, wash solutions, water and waste. Samples and sample management: Sample tubes 3 ml, 5 ml, 7 ml and 10 ml tubes, 1 ml and 2 ml secondary tubes, micro tubes Financing through our bank is also available. komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs available upon request!

Year of construction: 2008, condition: excellent (used), Bizerba CWL Eco flex continuous scale with Sick VMS520 volume measuring system Hodpfjmgax Usx Agwofd Bizerba CWL Eco flex continuous scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sortation systems and feeding lines. Bizerba WM-CWL flex Conveyor scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0,4 kg 230 V Sick VMS520 Volume Measuring System Special features - Non-contact, active measuring method - Measurement of length, width and height of cuboid objects - Measure length, width and height of objects with almost any shape - Works with a wide range of surface structures and on various flat conveyor systems - Flexible system configurations - Calculation of the small enveloping cuboid (box volume) - Calculation of real volume Device components Sick VMD520-2000 Volume measuring device Sick CLV 490 Stationary barcode scanner Year of manufacture: 2008 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 2015, functionality: fully functional, Morgana/Watkiss Powersquare 224 Booketmaker (Stitch/Folder/Trim) with PSF Sheet Feeder . Onine setup. Sheets feed from feeder onto bridge into Booklet maker. In full working order. Video on request. Very clean machine. Counter reading on photo. Mach Spec: The Watkiss PowerSquare 224 combined with the PSF Sheet Feeder is a high-production booklet-making system that produces professional square-back books up to 224 pages thick. The PSF (PowerSquare Feeder) enables near-line operation, feeding up to 10,800 sheets per hour and allowing the system to finish output from multiple digital printers. Watkiss PowerSquare 224 Booklet Maker This unit handles the stitching, folding, spine forming, and trimming in a single pass. Book Thickness: Produces books from 4 to 224 pages (70gsm) or 208 pages (80gsm). Maximum Finished Thickness: According to CLC Online, the maximum finished book thickness is 10.4mm. Stitching: Features a single heavy-duty static stitch head that can insert 1 to 6 stitches per book, supporting 2-up or 3-up production. Paper Size: Offline input ranges from 120 x 200mm to 370 x 520mm. Stock Range: Typically supports 60–300gsm depending on paper quality. Capacity: A single 15kg wire spool can produce approximately 127,000 books (based on a standard 20-sheet book). PSF Sheet Feeder Specifications The PSF (often referred to as the VFX or dual-bin feeder in newer Plockmatic/Morgana iterations) provides high-capacity feeding for near-line workflows. Feeding Speed: Feeds up to 10,800 sheets per hour. Loading Capacity: Features a high-capacity vacuum-assisted feeder with a loading depth of up to 540mm for long runs. Cover Feeder: Includes a separate integrated cover feeder to merge pre-printed covers with collated sets. Feeding Technology: Uses large suction belts and automatic sensors to detect miss or double feeds without manual calibration. Integrity Checks: Equipped with inbuilt OMR (Optical Mark Recognition) sensors or optional barcode readers to handle variable page-count jobs. Hfedsymgm Aspfx Agwod

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum Hfsdsrcm Rujpfx Agwed - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: new, Year of construction: 2026, Comparable to: e.g. Emmegi Double mitre saw for steel Cutting length: 5,000 mm Equipped with 7 NC axes for length positioning, outward and inward saw blade inclination, saw blade feed, and saw motor speed control Torsion-free welded construction with longitudinal linear guideways 2 x saw motors, each 4.5 kW Saw blade speed: 0–250 rpm Saw feed motorized from rear to front Feed speed infinitely adjustable Motorized angle adjustment between 135° and 45° Suitable for HSS circular saw blades, Ø 400 mm Pneumatic protective covers Water cooling with pump and coolant tank Left saw unit fixed to the base frame, right unit motorized and traversable Positioning accuracy: ± 0.15 mm Max. traverse speed: 25 m/min Length positioning compensates for saw angles and profile height Each saw head fitted with three horizontal and vertical profile clamps; in the event of pressure loss, the horizontal cylinders remain clamped Pneumatically swivelable material support between the saw heads Hjdeyinu Hopfx Agwefd 15” touchscreen Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network interface Corner cutting Overlength cutting Short cuts from 5 mm cutting length Crosscuts Available options: Micro-spraying unit Saw head inward inclination increased to 150° Label printer Barcode scanner Additional network interface and teleservice agreement

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Hfedpfx Agjx S Hzljwed Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 6 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, travel distance Z-axis: 500 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 355 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, UV Fiber Laser 355 nm, 6 W – NEW, SK LASER KOLLTRONIC with Workstation, Made in Germany Laser Source IPG – Made in Germany Laser Safety Class 1 Workstation: - Combined sit/stand workstation with ergonomic legroom - Fully enclosed aluminum profile construction - Front door with laser protection glass for clear visibility - Bright workspace lighting - Dimensions: H 1760 × W 920 × D 940 mm - Work platform: Stainless steel plate with 25 mm hole grid (710 × 400 mm) - Rear service door, screwed for easy part loading - Motorized Z-axis: travel distance 500 mm (focus depending on lens) - Extraction nozzle DN50 (extraction optional) - Safety (PL4) - Emergency stop - Interlock with 2 standard relays - Safety relay for door monitoring UV Fiber Laser: - Wavelength: 355 nm - Power: 6 W 40 kHz - Pulse energy: 20 µJ - Pulse frequency: 10–300 kHz - Air cooled - Pilot laser red light + 2 distance lasers for focus adjustment (Laser class 2) - Laser head manually adjustable in Y-axis Scanner & Optics - F-Theta lens F = 160 mm, anti-reflective protective glass - Marking field: 110 × 110 mm Control: Hfjdpfeyiz Dzjx Agwsd - Windows 11 - 19" TFT monitor, keyboard, mouse - Interfaces: RS232 / Ethernet / USB - KOLLTRONIC marking software: text, logos, QR/Data Matrix, barcodes Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE compliant · Made in Germany

Year of construction: 2014, condition: ready for operation (used), A conveyor system is available for the transfer of Euro pallets to a warehouse automation, suitable for weighing, barcode scanning of the pallet, optional film wrapping, measuring, output to two output places or in case of error to a separate place, with pallet wrapper C&C group C-ONE EXTREMA, pallet dimensions: 1200x800mm, max. pallet weight: 1t, including documentation, control cabinets and accessories. Hfedelcdf Dopfx Agwod

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Hfjdpowbuzfefx Agwed

Condition: good (used), Hach DR 3800 VIS Spectrophotometer The DR 3800 is a VIS spectrophotometer with a wavelength range from 320 to 1100 nm. The instrument comes with a complete set of application programs and supports multiple languages. The DR 3800 spectrophotometer includes the following Programs and operating modes: Stored Programs (pre-installed tests), Barcode Programs, User Programs, Favorites, Single Wavelength, Multi-Wavelength, Wavelength Scan, and Time Scan. The DR 3800 Spectrophotometer performs digital measurements in units of concentration, absorbance, or % transmittance. When a user-generated or programmed procedure is selected, a structured menu system and prompts guide the user through the test. This menu system can also generate reports, statistical evaluations of generated calibration curves, and reports on instrument diagnostic tests. Display modes: transmittance (%), absorbance, and concentration Light source: Halogen lamp Wavelength range: 320-1100 nm Wavelength accuracy: ± 1.5 nm (wavelength range 340-900 nm) Wavelength reproducibility: 0.1 nm Wavelength resolution: 1 nm Wavelength calibration: automatic Wavelength selection: automatic, depending on selected method Scanning speed: = 12 nm/s (in 1 nm steps) Spectral bandwidth: 5 nm Photometric measuring range: ± 3.0 Ext (wavelength range 340-900 nm) Photometric accuracy: 5 mExt at 0.0-0.5 Ext; 1 % at 0.50-2.0 Ext Stray light: < 0.1 % T at 340 nm with NaNO2 Data memory: 1000 measured values (result, date, time, sample ID, user ID) User programs: 50 Meter dimensions and environmental conditions: Width 368 mm; height 144 mm; depth 359 mm; weight 6.4 kg Ambient conditions (operation): 10-40 °C, max. 80 % relative humidity (without condensation) Ambient conditions (storage): -40-60 °C, max. 80 % relative humidity (without condensation) External power supply: 100-240 V/50-60 Hz (input); 15 V/30 VA (output) Interfaces: Use only shielded cables with max. 3 m length. 1 x USB type A; 1 x USB type B Housing protection class: IP3X Circuit classification: Device: Class III; System: Class II Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - you can find in our store! Hjdpeiuzvxsfx Agwsfd International shipping costs on request!

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for private medical practices and small clinics that value safe hygiene, efficiency, and reliability. Reliability and maximum cleanliness in every cycle: Compliant with DIN EN ISO 15883-1/-4 and the guidelines of the Robert Koch Institute (RKI), and with many additional functions, e.g., thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessings daily. Hfedpfx Aoin Edwsgwjd - Suitable for both glutaraldehyde and peracetic acid from a wide range of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber available. - Thermal reprocessing option, e.g., for multiple biopsy forceps, polyp loops, etc. - Thermal disinfection of the final rinse water as recommended by the Robert Koch Institute (RKI) for the DH version. - Secure documentation and traceability through batch control. User and endoscope identification via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing IT systems Number of endoscopes: For 2 endoscopes or 4 ENTs Hygienic design: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring system (CMS): No Chemistry Glutaraldehyde / Peracetic Acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger as standard. Printer as standard. Optional scanner/IT interface Thermal reprocessing of instruments at 90°C: Available with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse rating: 3 x 20 A Year of manufacture: January 19, 2013 Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Logopak 920 II PF Pallet Labeler Manufacturer: Logopak Pallet Labeler Model: 920 II PF Your Benefits at a Glance Top speed (up to 240 pallets/hour) Fewer roll changes Maximum flexibility Robust design (protective housing) Intuitive operation via touchscreen Quick-change print engine system Direct thermal or thermal transfer printing for labels up to A3 Internal database, error diagnostics, and many other features Operates as a stand-alone solution or integrated into a network VLP 210 II F Label Printing System The Logopak VLP 210 is an intelligent label printing system for barcode product labeling. The robust mechanical design of the 10 mm thick cast aluminum housing with solid steel hinge plates was specially developed for continuous operation in harsh industrial environments. The printer can be controlled either externally via a serial interface or operated as a standalone device thanks to its integrated intelligence. SPECIFICATIONS Print speed: 150 mm/s Core diameter: 50 mm/76 mm Label roll diameter: 180 mm Font size: 2 mm–50 mm Print direction: Rotatable 90°, 180°, and 270° Barcode types: Codabar, Code39, Code128, CodeMatrix EAN13, EAN8, EAN-128, Lata 2/5, Industrial 2/5, Interleave 2/5, ITF-14, Maxicode, PDF417, QR, UPC-A Interface: V.24 or 20 mA, network-capable Memory (RAM): 1 MB battery-backed CMOS memory, expandable to 8 MB Ambient temperature: 5°C to 40°C Hfjdpew U Tc Tefx Agwsd Dimensions (W x L x H): 700 mm x 500 mm x 400 mm mm Weight: approx. 50 kg Housing: Painted steel Integrated intelligence: IP54 control unit with Power Leap II® processing power • User-friendly interface with color LCD display and touchscreen • Multilingual user interface (standard) • Internal item database and error logging (standard) • Remote maintenance for software updates (optional) • 10 standard fonts, 4 scalable • Dual 64-bit RISC processors, 150 MHz clock • RS 422 and 20 mA, Ethernet connection also available (10/100 Mbit) • Industrial fieldbus for I/O control (CAN bus) with flexible programming using a high-level PLC language • Up to 200 digital I/Os for process control without loss of efficiency Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 350 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 1,200 mm, total height: 1,800 mm, total length: 940 mm, working range: 175 mm, height adjustment type: electric, door opening width: 1,100 mm, door opening height: 700 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Laser Protection Class 1 · Made in Germany · NEW 12-month warranty System & Workstation: - Combined sit/stand workstation, aluminum housing - Fully glazed right-front door, safety glass LK 1 - Bright work light, suction nozzle DN50 - Standard size: H 1760 × W 920 × D 940 mm - Workstation XXL W 1200 × H 1800 × D 940 mm, sliding roof for crane loading, max. 350 kg - Manual sliding door, opening approx. 1100 × 700 mm - Safety equipment: emergency stop, two-channel interlock, Performance Level 4 - Motorized Z-axis, travel range 400 mm, focus dependent on lens Laser: - IPG Ytterbium fiber laser - Output power 20 W, pulse energy 1.0 mJ - Wavelength 1060–1070 nm, pulse duration 100 ns - Pulse frequency 20–80 kHz, air-cooled, power consumption < 400 W - Beam quality M² < 1.2 - Pilot laser + 2 distance lasers, Y-direction manually adjustable Scanner & Control: Hodpfjyipxasx Agwefd - F-Theta lens F = 254 mm, marking field 175 × 175 mm - Windows 11 Pro, SSD, 23" monitor, keyboard & mouse - Interfaces: RS232, Ethernet, USB - SK CONTROL software for texts, logos, QR/datamatrix codes, barcodes Work Area & Safety: - Magnetic positioning on stainless steel platform 710 × 400 mm, hole grid 25 mm - Operating conditions: 230 V / 50 Hz, 15–35 °C

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 150 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, working range: 175 mm, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, IPG beam source – Laser class 1 · Made in Germany Hedpfx Aeyim S Ijgwofd Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Stainless steel work platform, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) - Interlock, emergency stop, safety relay Performance Level 4 Fiber Laser: - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Scanner & Optics: - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, adjustment range up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: text, logos, QR/DataMatrix, barcodes - Matrix function for batch processing - Easy positioning, focusing, designing, working, coding Additional equipment: - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Operating conditions: - Power supply: 230 V / 50 Hz - Operating temperature: 15–35 °C Condition: - New machine - CE compliant - Made in Germany

Condition: new, Year of construction: 2026, functionality: fully functional, Nanxing ND712D is a state-of-the-art 6-sided CNC drilling machine, equipped with two independent workstations, allowing for simultaneous processing of two panels and doubling productivity. This machine is designed for furniture manufacturers seeking speed, precision, and reliability within a compact footprint. Key Features - 2 independent workstations (1200 + 650 mm), each with a dedicated computer and processing units. - Optimized drilling blocks: up to 19 vertical drills + horizontal drills on the X and Y axes. - 4 main spindles (2 upper, 2 lower) with power up to 5.5 kW and 18,000 rpm. - Air-cushion tables for scratch-free panel handling. - Automatic dimension detector with alarm and panel compensation feature. - Servo-driven clamps and automatic side alignment system for maximum accuracy. - Advanced software + SYNTEC CNC control with user-friendly interface, supporting MPR, DXF, BPP, PDX, and XML file formats. - Barcode scanner for integration into automated production workflows. - Enhanced safety: side sensors, emergency stop, cable protection. Technical Specifications - Panel dimensions: Length 200–3000 mm / Width 30–650 mm / Thickness 10–60 mm - Max. traverse speed: X/U – 135 m/min, Y – 75 m/min, Z – 30 m/min - Total installed power: 43.8 kW - Weight: 6,300 kg - Machine dimensions: 6,620 × 4,620 × 2,378 mm - Power supply: 380V / 50Hz / 3 phase Hedexcwmqspfx Agwefd Application Areas - Medium and large-scale furniture manufacturing - Panel processing for kitchen cabinets, wardrobes, bathroom and office furniture - Complete 6-sided drilling + light milling in a single setup User Benefits - High productivity: processes two panels simultaneously - Error reduction: automatic dimension detection and precise positioning - Smart line integration: barcode scanner, compatible with ERP/CAD-CAM software - Optimal cost / maximum efficiency: one machine equals two drilling solutions

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NB875A is a professional 2-in-1 edge banding solution that combines straight edge banding and Soft Forming technology in a single machine – perfect for handleless doors and modern furniture fronts. Equipped with a complete set of pre-milling, heating, pressing, and finishing units, NB875A delivers flexibility, high productivity, and premium edge quality. Its fully automated control system and intuitive software allow fast switching between 14 different profiles (full C, left/right J, concave center, concave left/right, W-shaped, diamond profiles, etc.). Key Highlights Multi-functional machine for both straight and softforming edge banding in one pass. 14 profiles available, automatically switchable via servo control. Energy-saving function – automatic standby mode after idle time. Advanced industrial control PC with 24” touchscreen, online connectivity, optional barcode reader. Fully enclosed machine with sound-absorbing material for low-noise operation. CE certified, international brand electrical components. Working Units & Equipment Pre-milling unit with 2 electro-pneumatic motors, H35 mm cutters. 2 sets of J & C profile milling units (4 motors – 7.5 kW + 3.5 kW) with automatic switching. Panel pre-heating + 2 glue application units (panel + edge). Softforming & pressing station with precision steel rollers and band pre-heating system. Servo-driven tape feed & pneumatic end trimming (Ø180×3.5×60T saws, 12,000 rpm). Rough & fine trimming units, radius scraping & flat scraping. Double buffing units for a perfect glossy finish. Independent dust extraction hoods (9 × Ø125 mm) for all processing units. Automatic lubrication system and full safety protection (panel thickness detection, feed monitoring, E-STOP). Technical Specifications Minimum panel size: 300 × 150 mm (central concave ≥ 400 mm) Panel thickness: 18 mm (straight), 18–25 mm (softforming) Edge band thickness: 0.5–0.6 mm (softforming), 0.5–1.2 mm (straight) Feed speed: 8 m/min Power supply: 380V / 50Hz Air pressure: 0.7 MPa Installed power: 68 kW Net weight: approx. 6,000 kg Machine dimensions: 11,015 × 1,000 × 1,940 mm Applications Production of handleless doors for kitchens, wardrobes, and bathroom furniture Complex edge banding operations in medium and large-scale production Premium edge finish with invisible glue line Hfodpfxjxcwrmo Agwod Advantages for Manufacturers Maximum versatility: one machine for all straight & softforming edge banding profiles. Superior finish: smooth edges, perfect glue adhesion. High efficiency: automatic operation, quick profile changeover. Cost reduction: fewer machines required, minimal downtime.

Year of construction: 2018, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 10,500 mm Travel path Y-axis: 1100 mm Travel stroke of Z-axis: 655 mm Swivel angle B-axis: 0° - 90° Angle C-axis: 0° - 360° Max. speed 24,000 rpm. Tool changer with 16 standard tool positions plus saw blade and angle head Central lubrication Many tool holders, including angle head and saw blade (500 mm) minimum quantity spraying Clamp detection and automatic shifting 12 pneumatic material clamps Barcode scanner and label printer Swarf Conveyor made of metal Angle head for machining from below Extraction for cabin Pendulum operation through two light barrier areas Hodex Up Uajpfx Agwefd Manual control console Spindle hours: about 7500 The loading is included in the price, machine is already dismantled Weight: approx. 14,000 kg

Condition: new, functionality: fully functional, Fast universal talent for furniture construction and more Hfsdpfxotu I Ntj Agwed 9 controlled axes High axis speeds: 130 m/min / X-axis 75 m/min / Y-axis Machining of even the smallest parts (from 70x35 mm) Genuine 6-sided machining 2 automatic, independently controlled clamping grippers Horizontal machining also from the gripper side 3 independent drilling heads with a total of 47 drilling spindles grooving saw unit Milling spindle top and bottom Air cushion table in the infeed and working area Panel return in the outfeed Barcode scanner

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Hfjdpeyk Ip Tsfx Agwed Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked Hfjdjrx S Ipspfx Agwjd - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.