Used Barrels for sale (223)

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 Gsdpfxjxg I Elo Aabjkc - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Condition: good (used), GRP barrel, storage container, storage tank, silo system, tank, fertilizer storage silo, GRP tank, GRP container Godpfx Aowwil Deabjkc -GFK tank: GFK container with subframe -Container: Ø 2000 x 2280 mm, capacity approx. 6.5 m³ -Outlet height: 2100 mm -Number: 1x tank available -Price: per piece -Dimensions: Ø 2000 x 4680 mm -Weight: 600 kg/piece

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Gjdpfx Asgrzh Eeabskc Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Gkedpfx Ajxldidjabjc Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Chuck Guard Lighting Coolant System Rear Splashguard

Condition: new, bore capacity in steel (diameter) 30 mm throat 250 mm bore stroke 130 mm spindle taper MT 3 MK table: 380 x 380 mm column diameter 98 mm turning speeds 75 - 3200 U/min feeds mm/U total power requirement 1,1 kW weight of the machine ca. 220 kg. range L-W-H 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg Gkodpfeu Imc Hox Aabjc

Condition: new, Year of construction: 2025, Injection Molding Machine – Krauss Maffei KM 500-4300 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial computer using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle. Nozzle radius: 15 mm Nozzle opening: 6 mm Technical data (standard version) Clamping Unit Clamping force: 5,000 kN Opening force: 350 kN Platen dimensions (H x V): 1430 x 1350 mm Tie bar spacing (H x V): 1040 x 910 mm Gkjdpfx Aexdd S Neabjc Opening stroke: 1350 mm Mold height (min.–max.): 400–950 mm Daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 49 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20.0 Injection pressure: 1,839 bar Shot volume: 2,290 cm³ Shot weight (PS): 2,084 g Injection speed: 100 mm/s Injection flow rate: 636 cm³/s Screw speed (standard): 195 rpm Plasticizing capacity (at standard screw speed): 134 g/s Nozzle contact force: 129 kN Electro-hydraulic system Pump motor power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Dry cycle time (according to Euromap 6): 2.8 s / 728 mm Dry cycle time (according to KM standard): 2.5 s / 520 mm Hydraulic oil quantity: 1,180 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Parts placement on the operator-opposite side Axes: X-axis (from mold): 900 mm, servomotor Y-axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z-axis (crosswise): 2,500 mm, servomotor Dimensions and weight Net weight (with control cabinet): 25.0 t Machine dimensions (L x W x H): 8.08 x 2.80 x 2.39 m

Condition: like new (used), Year of construction: 2022, functionality: unexamined, machine/vehicle number: YF-240, type of input current: AC, Equipment: documentation/manual, In 2022 we purchased a new line, but the business direction changed and the line was never unpacked from the containers. The line is stored in 40HQ*3pcs container and in one 20GP container. Production capacity:220-300kg/hour WPC production line is applied to produce wood plastic composite products, like WPC decking, WPC door frames, WPC skirting and so on. by changing screw barrel and molds, it can produce both PE PP type WPC products and PVC type WPC products. Gjdpfxexb R Aio Aabjkc features of wpc production line: - adopts double step production, first compounding & granulating, then extrusion - adopts bimetallic screw barrel, high hardness, more wearable - adopts parallel twin screw extruder for compounding & pelletizing, good exhausting effect, better plasticizing effect Please view all the technical specification in attachments.

Condition: good (used), revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center center Gkjdpfx Aajrp Ilaeboc -Manufacturer: Röhm, rotating centering tip type 110 H -Barrel tip: shaft-mounted -Recording: MK5 -Quantity: 1x centering tip available -Price per piece -Dimensions: Ø 90/257 mm -Weight: 4.4 kg

Condition: used, overall weight: 35,000 kg, empty load weight: 8,280 kg, maximum load weight: 26,720 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, first registration: 11/2011, suspension: full air, color: green, Equipment: ABS, Axles : Lift axle Brakes : EBS, disc brakes Semi-trailer height : standard (1100-1250 mm) Platform : Side sliding tarpaulin, rear: Portal doors Other equipment : Storage/tool box Approval / documents : previously Approved in Germany ID: 117624 Kögel locations Left + right Safe server sliding tarpaulin panel system L: 13620 mm W: 2480 mm H: 3000 mm Lift axle SAF axles Certificate VDI 2700 and standard DIN 12642 Pallet stop bar on both sides DAIMLER version 9.5 Beverage mixed load Barrel and beverage crate pallets 34 Euro pallets 80 x 120 cm 26 industrial pallets 100 x 120 cm We always have a large selection of used refrigerated and ice-cold vehicles in stock. You can find more from our range under Non-binding offer, sale only to traders, errors and prior sale reserved Advertisements and company logos on vehicles may have been digitally processed on photos Gkjdpfxoulqdbs Aabec

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Gedpfx Aaoxc Inxjbekc Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, DGUV certified until: 09/2027, Spiral kneader Gksdpjhfha Dsfx Aabjc Model: SP 50 T Kneading machine with sophisticated and robust technology! for the best kneading results! Digital easy touch control with rewind key Dough machine with 3 timers 1 mixed speed and 2 forward speeds for min / max. 6 - 50 kg of dough Flour dust hood with steamer Stainless steel kettle and spiral Kettle left and right barrel Mobile machine with 4 brakes DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Dimensions: 630 x 1010 x 1220 / 1600mm, WxDxH With a 24 month warranty Visit our large bakery machines warehouse!

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm Gksdpfx Aaop E Egljbsc backup rolls: backup block/chain

Condition: used, Year of construction: 2014, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 500 mm max. width of grinding wheel: 500 mm weight of the machine ca.: 16 t. dimensions of the machine ca.: 12 x 10 x 8 m. grinding wheel diam. min/max.: 420-610 grinding wheel diameter - width-internal grin: 304,8 x 500 mm Regulatin wheel diameter min/max.: 300-350 mm The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Gsdpfxot Uw Avs Aabskc Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Wittmann robot General description: The machine is equipped with a fully hydraulic clamping system. Control: MC5 with color monitor, integrated operator panel, and three built-in USB ports. Plasticising unit: Complete unit for thermoplastics in a wear-resistant version, screw diameter 120 mm, non-return valve, open nozzle. Technical data Clamping unit Mould clamping force: 11,000 kN Mould opening force: 770 kN Dimensions of clamping plates (h × v): 2210 × 1910 mm Tie bar clearance (h × v): 1550 × 1250 mm Mould opening stroke: 2000 mm Mould height (min–max): 600 – 1200 mm Platen stroke: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Max. shot weight (PS): 6175 g Screw speed (standard/option): 103 / 145 rpm Injection rate (standard): 1118 cm³/s Injection rate (with accumulator): 1696 cm³/s Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 82 kW Number of heating zones (barrel): 7 Number of dry cycles according to Euromap: 802 / h Gkodpfxsxcpute Aabsc Oil tank capacity: 2440 l Dimensions and weight Net weight (incl. control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Condition: used, mileage: 8,66,052 km, power: 324 kW (440.52 HP), first registration: 06/2010, overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, gearing type: automatic, emission class: euro5, loading space width: 2,480 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Construction Description: Trucks with Trailer (MAN, Beverage Body) General The vehicle is a MAN truck with a beverage body and trailer combination. The truck is designed as a drawbar combination (truck + central axle trailer) and is primarily used for beverage transport. 1. Chassis & Cab * Manufacturer: MAN * Model: TGA * Axle configuration: 6x2 * Cab: Spacious sleeper cab, suitable for long-distance haulage * Interior features: * Multifunction steering wheel with integrated controls * Clear dashboard with analog round instruments * Air conditioning and ventilation system * Passenger seat, bunk area behind seats 2. Body (Truck + Trailer) * Body type: Beverage body/box body * Material: Aluminum/composite construction, insulated * Roof: Translucent tarpaulin roof (visible from inside), ideal for daylight use during loading and unloading * Interior floor: Durable wooden floor, heavy-duty, suitable for roll cages, pallet jacks, or pallets 3. Trailer * Design: Central axle trailer, also with beverage body * Axles: 2 axles 4. Application * Mainly for transporting beverages in crates and barrels * Large loading volume due to the combination of truck and trailer * Easily accessible from sides and rear for fast loading and unloading 5. Special Features * Clean interior * Generous cargo space with robust floor Gksdjw Ii A Nepfx Aabjc * Well-equipped driver's cab * Suitable for national and regional logistics

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Technical data: - Barrel width 1 - 15 mm - Cutter head with indexable inserts - barrel angle 30° - 37,5 - 45° - 60 ° - Drive 220 V / 1100 Watt - space requirement approx. W 450 x D 300 x H 350 mm - weight approx. 20 kg Godoi Ab Unopfx Aabjkc - transport case

Year of construction: 2002, condition: good (used), functionality: fully functional, TECNOVA MINI / 60 repelletizing machine Type: ES 60 N / 35D DEG Year of manufacture: 2002, little used, completely refurbished in 2023. Availability: Immediately. Current condition: Can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Feeding screw: yes, Degassing system: yes, Cutting head type: head cutter, Suitable materials: PE/PP/PS. Other specifications: 8 mm diameter granules, Gjdpjw U Swpsfx Aabskc Moisture max. 3% Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control panel, Pressure control, Water cooling, transport, Venturi, cyclone and pipes, Dimensions: 6.40 m long x 2.10 m wide x 4.30 m high Built-in power: 30 Kw. + film granulator Meccanoplastica Type 3140 (1998) !!! Price included!!! For sale with spare parts: screw barrel, heating elements, filter changer, head cutter insulation, knives for grinder, compactor, silo bearings, cyclone, head cutter.

Condition: excellent (used), strip width: 6 - 200 mm Gkodep E Ed Repfx Aabec strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Condition: excellent (used), Year of construction: 2004, Injection molding machine NEGRI BOSSI V1250 1,250 tons Year: 2004 Gjdpfxjw Uaw De Aabekc Operating hours: 32,000 New screw and barrel

Condition: refurbished (used), Year of construction: 2008, operating hours: 35,000 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 48 mm, Now fully refurbished is this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. The machine is now fully refurbished and ready to go, it can be inspected in full operation at our workshop. As a refurbished machine, it is guaranteed to be fault & leak free. Therefore, it’s in our interest to get any niggles out of the machine before it leaves our workshop. We have full work reports available for this machine so you can judge the internal condition for yourself – just ask! BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Gsdpoxamn Eofx Aabokc Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) only 17.000 hours in automatic cycle! Main Technical Parameters: Clamping force: 10,000 kN Opening stroke: 1220 mm Minimum mould height: 500 mm Maximum mould height: 1160 mm Daylight between platens: 2380 mm Distance between tie bars: 1160 x 1160 mm Clamping platen size: 1650 x 1700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2721 ccm Shot weight (PE): 1986 g Injection rate: 544 g/s Max injection pressure: 2280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50.000 kg Equipment and Features: 423 – Proportional valve for injection (Rexroth) S01 – 8x hydraulic core pullers (4x fixed platen, 4x moving platen) with servo motor 432 – 8x core relief 662E – 16x integrated hot runners 623 – Acoustic alarm 237C – Safety locking force sensor 430C – 8x pneumatic cascade control Barrel and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable inputs/outputs Flow meter with 6 tubes + hoses + cable trays + valves + filters + nozzles + Gkedswtgltspfx Aabec labor, all per Lamky specification (Stäubli quick couplings) Total sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Centering ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core puller circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed, 4x moving side E65 – Interface for temperature controller (4 zones) 236 – Automatic ejector bar retraction (operator side)

Year of construction: 2010, condition: good (used), Offer 23026 Technical data: - Barrel width 1 - 15 mm Gkodji D D Ugjpfx Aabsc - Cutter head with indexable inserts - barrel angle 30° - 37,5 - 45° - 60 ° - drive 220 V / 1100 Watt - space requirement approx. W 450 x D 300 x H 350 mm - weight approx. 20 kg - transport case

Condition: used, Year of construction: 2003, operating hours: 35,900 h, functionality: fully functional, screw diameter: 58 mm, heating capacity: 25 kW (33.99 HP), power: 125 kW (169.95 HP), Selling due to a closure our WPC/PVC profile extrusion line consisting of: 1) Main extruder: manufactured by Cincinnati Austria 2003, model Fiberex T58, twin-screw, conical, counter-rotating, screw diam 58mm, motor 39 kW (DC), screws and barrel TC coated. The extruder is designed for WPC profile production but could be re-set for other product and/or type of plastic. Low running hrs. 2) Co-extruder: manufactured by Liansu in 2017, model LSE-38, twin-screw, conical, counter-rotating, screw diam 38mm, motor 11 kW (AC), screws and barrel TC coated, horizontal dosing feeder, double degassing filter, has own control cabinet, able to run synchronic with main extruder or stand-alone. 3) Calibration table: manufactured by Weber in 2010, calibration length 4m, SS water bath, adjustments up/dwn, left/right, body dimensions 4000×1100×1200mm 4) Haul-off unit: manufactured by Technoplast Austria, double caterpillar track driven by 2x 2.2 kW AC motors, hauling size 240mm (W) x 2700mm (L), speed range 0～6.75m/min adjusted DC drive. Machine combined with cutting saw (diam 400mm) unit, cutting height 100mm, precision cutting length adjustment by Autonics controller. Dpls2V 5) Stacker: pneumatic discharge, length 6m. Godpfx Aev Ddrtoabokc The line is in good working condition, could be demonstrated on-site by appointment. Optional equipment: vertical Kramer-feeder for pulp materials (made by Cincinnati), pneumatic material auger Simatic, optional replacing the co-extruder made by battenfeld-Cincinnati K38, etc.etc.

Condition: good (used), COMPLETE nail making plant with WAFIOS machines consist of the following.... - 8x Machines Wafios model N-5 - 1x Machine Wafios model N-6 _____ TOTAL – 9 nail making machines All nail machines has noise/dust protection covers(boxes) Gksdpfx Aasfcqgwsbsc - 2 BIG nail cleaning drums - capacity 2000 kg per drum - 30 metal barrels for tranport of nails - 10 mechanical payoffs for nail making machines - Nails range - 30 - 145 mm - Wire range - 1,80 - 5,20 mm Capacity of complete nail plant is - approx. 13.000 kg/ 8h

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, screw diameter: 38 mm, Selling due to a closure our WPC/PVC profile extruder manufactured by Cincinnati-Battenfeld Austria. YOM 2011, model Fiberex K38, twin-screw, conical, counter-rotating, screw diam 38mm, motor 15 kW (AC), screws and barrel TC coated, horizontal material dosing feeder, double degassing filter. Gedpfx Aaet U Iy Eebskc The extruder is designed as a co-extruder for WPC profile production on an adjustable column, but could be used as a stan-alone extruder as well on an own basement, has own control cabinet and remote control. Processing unit can be re-set for other product and/or type of plastic. Low running hrs. The extruder is in good working condition, could be demonstrated on-site by appointment. Many optional peripheral equipment upon request.