Used Bavaria for sale (320)

Condition: used, Year of construction: 2011, Flash pasteurizing system with buffer tank Additional title: Pasteurization with buffer tank Capacity: 220 hl/h Temperature heating zone: 92 °C Pasteur units: 50 PE Heating time: 42 Sek. Ijdpjxbn Hljfx Aabstn Power: 7,5 kW Current: 63 Ampere Voltage: 3 x 400/230 Volt Frequency: 50 Hz Length: 3900 mm Width: 3000 mm Height: 3000 mm Operation / Control: Siemens S7-300 with CPU 315-2DP, Multi Panel MP 277 Key with 10“ Color TFT- Display Material: stainless steel Base construction: Base frame for holding control cabinet and components Features: Plate heat exchanger, buffer tank 80 hl, 3 bar, accessories for PWT and PT, hot water circuit fittings, pumps, measurement and control technology, connection panel, control, control cabinet

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 Itjdew Nad Hepfx Aabon For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Year of construction: 2003, condition: used, Additional title: stainless steel brew vessel Total volume: 300 hl Area approx.: 15 m² Specific false bottom load: 165 kg/m² Frame height: 2 m Material: Stainless steel Itjdpfx Aaexbn E Ioben Features: Outlet vent bracket, entrance dome (DN600), inspection glas (DN600), CIP warning light, door safety switch, interior lighting set (IP54)

Condition: used, Year of construction: 2002, Cylindroconical fermentation and storage tanks with 3 frame cooling zones and cone cooling. The tanks are insulated and clad. Individual sale possible. Additional title: vertical, coolable stainless steel tanks Gross volume: 58890 l Max. overpressure: 2 bar Operating temperature: -10 to 50 °C Total cooling area: 13,3 m2 Length: 3370 mm Width: 3370 mm Height: 11000 mm Itodpfjxbn Eujx Aabsn Material: stainless steel Position: vertical Features: insulation, cladding, cooling jackets (3x frame, 1x cone)

Condition: used, 7 x cylindroconical fermentation tank (CCT): from Apparatebau Nordhausen, built in 2009, 25 hl gross volume. Made of stainless steel with two cooling jackets, insulation and firmly welded stainless steel panelling. 1 x storage tank: from Metrec, upright, 50 hl gross volume 1 x storage tank: from Metrec, upright, 40 hl gross volume 6 x storage tank: upright, 10 hl gross volume 1 x pressurised tank: from Kaspar Schulz, built in 1994, horizontal, 37 hl gross volume, 3 bar. Individual sale possible. Additional title: various tanks from stainless steel Iedjxbn Ehjpfx Aabstn Volume CCT: 2500 l Volume pressure tank: 3700 l Volume storage tanks: 5000 l Features: 7 x CCT, 8 x storage tank, 1 x pressure tank, including fittings and accessories

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: -washing machine Manufacturer: Kitzinger Year of manufacture: 2011 Output 1500 - 3000 bottles/h -bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 -swing top sealer Manufacturer: Rico -labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 -laser printer for dating Manufacturer: Domino -bottle collecting table Itodjxbnylspfx Aabsn Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Capacity: 3000 bottles/h Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Features: Kitzinger bottle washing machine capacity 1500-3000 bottles/h; Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine Domino laser printer for dating; bottle collection table

Condition: used, Brewing plant with stainless steel 5-device brewhouse (manufacturer: Nordhausen) with an output of 10 hl, with 2-roll grist mill, wort cooling, wort aeration and hot water tank. Fermentation, storage and pressurised tank cellar with: - 7 pieces 25 hl ZKGs (Nordhausen, 2009) coolable, insulated with firmly welded stainless steel panelling - 6 upright storage tanks, 10 hl - 1 upright storage tank, 50 hl, manufacturer Metrec) - 1 upright storage tank, 40 hl, manufacturer Metrec - 1 horizontal pressurised tank (Kaspar Schulz, 1994), 37 hl, 3 bar - 1 yeast tank (Nordhausen, 2012), 3.5 hl, 2 bar, insulated, conical, with content measurement. Filtration with mobile kieselguhr filter and Pall particle filter. With mobile CIP system (Nordhausen, 2009) with 2 tanks of 1.6 hl each in square tube frame with pump and operating buttons and switches. Supply technology: - Steam generator (Jumag, 2009), heated with liquid gas - Compressed air system (Kaeser, 2008) - 2 x ice storage refrigeration system (Hafner-Muschler, 2009 and 2011) Additional title: 10 hl brewhouse with tank cellar and supply technology Cast wort capacity: 1000 l Iodpjxbnw Defx Aabotn Features: 2-roll grist mill, 5-vessel brewhouse (Apparatebau Nordhausen) with mash tun, lauter tun, wort kettle, whirlpool, hot water tank, wort aeration, wort cooling system, 7 x 25 hl CCTs, 6 x 10 hl storage tanks, 1 x 40 hl storage tank, 1 x 50 hl storage tank, 1 x 37 hl horizontal pressure tank, 1 x 3.5 hl yeast tank, mobile kieselguhr filter, mobile CIP system, steam generator, compressed air system, 1 x ice storage refrigeration system

Condition: used, Year of construction: 2002, Additional title: Pallet cord securing Capacity appr.: 43200 bo/h Formats: euro pallets in longitudinal transport Itjdpfx Aaoxbnqwobsn

Condition: used, Year of construction: 2001, Insulated, cylindroconical stainless steel tanks with two frame cooling zones and cone cooling. Most recently used as a beer storage tank with a usable volume of 150 hl. Additional title: vertical, coolable, insulated stainless steel tanks Gross volume: 15260 l Pressure capacity: 0,99 bar Max. operating temperature: 20 °C Cooling area: 6,95 m2 Length: 2,52 m Width: 2,52 m Weight: 2100 kg Iodpfxovu Tvve Aabotn Material: stainless steel Base construction: standing frame Features: insulation, tank fittings

Condition: used, Year of construction: 2015, Electronically controlled dual system for softening particle-free water. With two pressurised tanks made of GRP. Freely adjustable cycles with time or quantity-controlled regeneration. With brine tank. Additional title: Double system with GRP tanks, Softening with a resin ion exchanger Operating pressure: 8 bar Operating temperature: 40 °C Voltage: 230 V Frequency: 50 Hz Material: vessels from GFK Itedpfxjw U D S Ej Aabsn Features: Pre-filter, valve block, water meter, 2 x GRP tanks, various hoses

Condition: used, Year of construction: 1990, Gas-fired (propane) rapid steam generator with an output of 300 kg steam/hour. Refitted in 2017/2018 by the Bosch company. Additional title: gas-heated rapid steam generator Capacity: 300 kg/h Calorific value (0°C / 1013 mbar): 25,89 kWh/Nm3 Gross heat output (nominal load): 200 kW Max. permissible operating overpressure: 13 bar Voltage: 400 V Frequency: 50 Hz Itedpfsw U D Slox Aaben Features: gas burner (Weißhaupt type WG 30...-C), Sensors (transmitter, pressure signal transmitter)

Condition: used, Year of construction: 1999, For paper wrap-around labels ‘Zollbanderole’. Labelling with wet glue. Additional title: wet glue wrap-around labeling Capacity of bottling line: 5000 bo/h Current: 16 A Voltage: 400 V Frequency: 50 Hz Compressed air: 3.5 - 6 bar Itjdpfx Ajw U D Rnjabon Operation / Control: Simatic S5-95U

Condition: used, - 3 x 145 hl CKG: Cylindroconical fermentation tanks with three jacket cooling zones and one conical cooling zone. Space-saving design with a central base. Equipped with a 2-hole cleaning/air valve combination, manhole, and crane eyes. Manufacturer: Ludwig Edel; Year of construction: 1981 - 2 x 92 hl CKG: Cylindroconical fermentation tanks with two jacket cooling zones and one conical cooling zone. Manufacturer: Ernst Möschle; Year of construction: 2007 - 1 x 63 hl CKG Cylindroconical fermentation tank with two jacket cooling zones and one conical cooling zone. Manufacturer: Ernst Möschle; Year of construction: 2007 Additional title: Vertical, coolable stainless steel tanks; built between 1981 and 2007 Max. overpressure each: 1 bar Iodpew U D Hpjfx Aabstn Material: stainless steel Position: vertical Features: 3x CCT 145 hl, 2x CCT 92 hl, 1x CCT 63 hl

Condition: used, The crates reach the palletiser via a two-lane crate conveyor belt running transversely. A sliding device pushes a row of four crates at a time to the palletiser gripper head's pick-up table. After repeating this process, the crates are arranged in a 2x4 pattern below the gripper head. The crates are then placed in a single layer on the pallet below. Additional title: palletising of beverage crates Isdpfx Aajw U D E Sjbstn Capacity: 3000 crates/h Formats: Beer crates; Euro pallets; NRW, swing-top, longneck and Steiniflaschen bottles Features: Pushing device, box table, palletising robot, Control panel with user interface and touchscreen monitor Layer patterns: 8 crates in a 2x4 arrangement per layer; 5 layers per pallet or 7 layers per pallet (for stone bottles)

Condition: used, Year of construction: 1998, Additional title: reverse osmosis plant Capacity: 6 m³/h Length: 3,7 m Width: 0,85 m Height: 2,1 m Ijdew U A Urepfx Aabetn Weight: 1000 kg Features: Reverse osmosis system, scale saturation tank, permeate tank, HMP dosing, milk of lime preparation station, various pumps, valves and measuring probes

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Ijdpow U A T Iefx Aabstn Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013) with refrigerant R134a. Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Iodpjw Uvfwjfx Aabjtn Cast wort capacity: 10 hl Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator,

Condition: used, Non-returnable PET filling line, consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in 4x5 arrangement) - PET shredder (Strautmann BrikPress 240, year of construction 2019) - Crate washer with cleaning nozzles - Preform feeding device - Stretch blow-moulding machine (SIPA, type SFR 8 EVO, with 8 cavities) - Stretch blow-moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Premix system (Procomac Starmix, built in 2001, 200 hl/h) consisting of water deaeration, mixer and carbonisation with a total of 4 tanks and two cartridge filters for water treatment. - Velcorin dosage (dmt, Burdomat II G) - Capping task and cap conveying system - PET bottle rinser, filler and capper (Procomac) - Fill level control (Heuft Spectrum TX) with rejection - Labelling machine (P.E. Futura) for hotmelt labelling of wrap-around labels, in a block with dating (Videojet) - Crate packer (BMS) - Free, driven conveyor lines for bottles and crates Itjdjw Uvd Tspfx Aabsn Additional title: non-returnable PET filling Capacity: 16000 bo/h Formats: 0.5 litre disposable PET bottles, 20-bottle crates Features: Bottle ejector, crate washer, shredder, preform feeder, 2 x stretch blow moulder, premixer, velcorindosage, cap feeding and conveying, rinser/filler/capper, fill level control, labeller, dating, packer, Free crate and bottle transport

Condition: used, Year of construction: 2019, Semi-automatic KEG system with two stations. Itsdpfx Asw Uvdyjabsn Additional title: Keg cleaning and filling system Capacity: 30 KEG/h Power: 6 kW Current: max. 15,0 A Voltage: 400V AC Formats: 10 L, 15 L, 20 L, 30 L, 50 L KEGs, with flat fitting Running direction: left to right Operation / Control: Control box with touchpanel, Simatic S7-300 Material: stainless steel Position: free standing Features: 2 stations, CIP station with 2 tanks, KEG infeed and outfeed roller conveyors, control cabinet with touch panel

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Water: < 5 bar (cooling water) Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Iodpfx Aew Uvdgeabstn Operation / Control: Simatic S7-300, Touch Panel Position: free standing Base construction: Fully mounted on tubular frame with spherical feet Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit

Condition: used, Depalletising and palletising line for Euro pallets, consisting of the following components: - Approx. 39 m empty pallet transport with three corner transfer units and pallet feeding - Depalletising robot (Kettner type Palcon), swivel arm robot - Pressure control for empty pallets (Kettner) - Pallet infeed and outfeed and buffer for empty pallets (Kettner) - Palletising robot (Kettner), swivel arm robot - Pallet strapping machine (Strapex) - Approx. 12.5 m full pallet transport with a rotating segment, a corner transfer device and pallet delivery Additional title: Pallet loading and unloading, pallet securing, pallet transport Capacity pallet unloader: 46800 bo/h Capacity pallet loader: 43200 bo/h Itedpfx Aow Uvcveabjn Formats: 11, 20 and 24 module boxes, EURO pallets Features: Pallet loading and unloading, pallet transport with rotating segment and corner transfer devices, palletising robots, empty pallet inspection, pallet loading and unloading, palletising robots, pallet strapping machines Layer patterns: 8 boxes in a 2x4 arrangement per layer, 5 layers per pallet (for 20 and 24 module crates)

Condition: used, Year of construction: 2001, Additional title: coolant glycol Max. working overspressure: 28 bar Max. filling weight: 100 kg ca. 2x 50kg Ijdpfew Uvbxjx Aabetn Content: 30 l Voltage: 400 V operating voltage, 230 V control voltage Frequency: 50 Hz Features: condensator with 4 fans on a steel frame, 2 x glycol pump 2 x Verdichter (max. Fördervol 133,5 m3/h, Drehzahl 1750 1/min), 2 x PWT (Mindesttemp. -150°C, Höchsttemp: 204/125°C), glycol tank

Condition: used, Pressure tank hose cellar with 7 pressure tanks. - 2 x 104 hl, 3 bar (Gross, 1983/1984) - 2 x 104 hl, 3 bar (Edel, 1978) - 1 x 92 hl, 3 bar (Ziemann, 1963) - 1 x 40 hl - 1 x 50 hl - Various pumps and hoses Additional title: 7 pressure tanks Material: stainless steel Iodpfx Ajw Uvbleabstn Features: Pressure tank cellar with uninsulated, uncooled pressure tanks. 2 x 104 hl, 3 bar (Gross, 1983/1984), 2 x 104 hl, 3 bar (Edel, 1978), 1 x 92 hl, 3 bar (Ziemann, 1963), 1 x 40 hl, 1 x 50 hl

Condition: used, Centrifugal pumps for pumping beer, water or other low-viscosity media. Available in many performance and pressure ranges. Manufacturer: Hilge/Grundfos/KSB/Fristam/Alfa Laval Please let us know your application (medium, capacity, delivery head) and we will find a suitable solution for you. Itedpew Uvbfsfx Aaben Material: Pump housing and impeller in stainless steel Position: free standing/mounted on base Features: Connections as flange connection or milk pipe screw connection, optional: self-priming/splash guard/chassis/frequency converter

Condition: used, Year of construction: 2001, Additional title: with 2 lanterns Material: stainless steel Base construction: 2 lanterns, automatic Itjdpfow Uvaujx Aabjn Features: VA-Lanterns, sight glasses, sensors