Used Bellow Actuator for sale (688)

Condition: used, Year of construction: 2002, Chamber pasteurizer for pasteurizing bottled beverages. The machine can accommodate up to 9 pallets at a time. Pressing the start button causes the door to close automatically and the chamber pasteurizer to start the program previously set via the visualization system. Once the program has run its course, the door opens automatically. Manual operation with manual control of the actuators is also possible. Additional title: for simultaneous pasteurization of up to 9 pallets Max. load: 9 pallets Lsdpfx Aqoy R Uwfevorl Voltage: 380 V Frequency: 50 Hz Material: stainless steel housing Base construction: standing on feet Features: pasteurization chamber, pallet conveyor, blower, extraction system, control system, and visualization

Condition: new, Condition: New PSEN protective door system sg2c-3LPE + PSEN sg2 actuator Lrsdpjy S Du Asfx Aqvsl

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. Lsdpfx Aqoy Rlbnjverl 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance.

Condition: new, sheet width 1600 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: Lrsdpfxsyv N E Uj Aqvsl - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, working length 2050 mm 2.0 mm max. wire thickness 3.0 mm Underfloor 110 mm motor strength 165 mm motor strength 22 kW bending speed 5.2 mm/min length 3150 mm height 1150 mm width 850 mm Accessories / equipment: - Conical bending device Lrodoyv N Dwjpfx Aqvol - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds Lsdpfx Aeyv Nh Njqvsrl - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 2100 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 160 mm lower roll diameter 140 mm side roll diameter 120 mm total power requirement 2,2 kW Overall size 4140x1040x1140 mm weight of the machine ca. 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers Lrjdpfxjyv Nf Ue Aqvjl - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 2100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 230 mm lower roll diameter 210 mm side roll diameter 190 mm total power requirement 7,5 kW weight of the machine ca. 4.750 kg dimensions of the machine ca. 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear Lsdeyv I Ubjpfx Aqvjrl driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) Lrjdpfsyv I Smsx Aqvsl - Calibration

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Lrodpfx Aox S Hmzeqvel Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: new, • KSB / amri BOAX-SF butterfly valve • Diameter: DN200 • Working pressure: PN16 • Seal: EPDM (for water, HVAC, industry, fire protection) • Temperature range: up to 130°C • Material: ductile iron with epoxy coating • Actuation: manual lever with locking positions • Valves unused, stock item, year of manufacture 2021 • Ready for operation, 100% functional • Ideal for water, industrial, hydrant, and fire protection installations. - PRICE LISTED PER VALVE. Lrjdpfx Aqexyq Icjvol

Condition: new, mileage: 10 km, power: 131 kW (178.11 HP), fuel type: diesel, empty load weight: 2,900 kg, maximum load weight: 5,200 kg, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 3,650 mm, loading space width: 2,050 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, cruise control, differential lock, fog lights, full service history, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, trailer coupling, Vehicle with truck registration (Cat. N) Driver fatigue warning system DDAW Blind spot sensor integrated in the rear bar or at the rear overhang Blind spot monitoring system (2 sensors on the right side of the vehicle) Intelligent speed assistant – traffic sign recognition Monitoring system for the area in front of the vehicle when setting off (MOIS) CAB: Side mirrors mounted on arms for body width of 2.2 m Tinted windscreen Halogen headlights Widened wheel arches Fuel filler opening at the B-pillar of the cab Emission standard Euro VI lit. E Rear underrun protection, steel profile, with lighting Black radiator grille cover Lodpfx Aqjy Ucxfovorl Daytime running lights (DRL) with bulbs Manual high beam activation Cab designed for a maximum width of 2000 mm Spare wheel in a pull-out basket under the rear overhang of the vehicle AdBlue tank 20 l (hidden in the entry area on the passenger side) Reversing signal with adjustable volume (72/55 dB) Batteries 2x12V 110Ah, for Daily 1x12V 110Ah Exhaust pipe centrally located under the vehicle between the axles Tow coupling 3.5 t Gross vehicle weight rating standard for vehicle type Wheel chocks, 2 pieces ESP system Fuel tank made of profiled plastic 70 l, filler neck in B-pillar (left side) Steel wheels Emergency brake system AEBS + City brake Mechanical parking brake with cable actuation Standard mounting of chassis components Splash guards for front axle Standard rear lights Tyres 195/75 R16 Acoustic comfort enhancement package Seat belt not fastened warning signal Telematics module Connectivity Box (4G) Warning triangle, 1 piece Central locking with remote control Thermal insulation of rear wall Lane departure warning system (LDWS) Tyre pressure monitoring system (TPMS), fitted at the valve Standard plastic headrests Standard key set with two keys (one key with remote if remote central locking is fitted) Steering wheel with soft plastic coating Digital tachograph DTCO 4.1, 1 day / 2 drivers, VDO Fabric seat upholstery (edges reinforced with vinyl) Heated and electrically adjustable exterior mirrors Automatic activation of lights and wipers COMFORT USB port A+C on driver’s side Infotainment system with 7-inch display Fog lights Cab ventilation and heating system with manual air conditioning Standard cruise control (CC) Air conditioning compressor 170 cm³ Comfortable driver’s seat with height-adjustable lumbar support (3-way adjustable, armrest) CONSTRUCTION 77742 Entry handles on A-pillar on both sides of the cab 72813 Electronic differential lock (Traction+) and hill start assist 00190 Steel cover for radiator and oil sump 06094 Two-stage multi-leaf rear springs (semi-elliptical) with auxiliary spring 00744 Window/windows in the rear wall of the cab 3-WAY TIPPER 3650x2050x400 Rear tailgate with opening and folding function, automatic rear tailgate opening system, side flaps for opening Wired remote control The floor is made of 3 mm thick hot-dip galvanized steel sheets 5-stage tipping cylinder with a maximum load capacity of up to 6 tons

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,937 h, machine/vehicle number: MAN00000A00773607, power: 115 kW (156.36 HP), load capacity: 4,999 kg, mast type: telescopic, lifting height: 24,500 mm, empty load weight: 18,900 kg, transport length: 7,740 mm, transport width: 2,490 mm, transport height: 3,040 mm, fuel type: diesel, color: red, drive type: All wheel drive, Equipment: all wheel drive, Manitou MRT2550+ – Series PRIVILEGE ST4 S2 Special wheeled telescopic boom handler Year of manufacture: 2018 Unladen weight: 18,900 kg Drive type: All-wheel drive Total axles: 2 Braked axles (service brake): 0 Length: 7,740 mm Width: 2,490 mm Height: 3,040 mm Rated capacity: 4,999 kg Nominal load: 4,999 kg Load at radius – min / max: 4,999 kg / 300 kg Drag force: 9,000 daN Max lifting height: 24.5 m Working radius – min / max: 5.1 m / 18.5 m Actuation type: Electrohydraulic Max persons on platform + materials: 3 persons + materials Lodpey R T Eusfx Aqvsrl Engine type: OM 934 LA.E4-5 Power: 115 kW Displacement: 5,132 cm³ Fuel type: Diesel Included attachments: Personnel basket, winch, jib beam, forks

Condition: good (used), Year of construction: 2014, functionality: fully functional, laser power: 4,000 W, laser type: fiber laser, TruLaser Robot 5020 LW01 4000 Watt X x Y x Z Working Area max (mm): 2000 x 1000 x 700 Laser Power: 4000 Watt Operating Hours: 19,975 h Laser Beam On: 10,353 h Standard Equipment Machine: - KUKA Robot KR30 HA (High Accuracy) - Robot working area (per layout) - Software package Laser Robot Tech - Paper documentation - Basic media supply kit - Robot media guidance - Robot height extension - KTL alignment set - Mobile operating trolley for KCP - Compact dust extractor 3000 m³/h, plate filter, extinguishing unit - Laser safety cabin - Extraction piping - Laser safety window - Cable ducts Robot: - Magnetic coupling Workpiece Positioner - DKP400.1 rotary/tilt positioner - DKP 400.1 energy supply - DKP 400.1 actuator/sensor interface - 3D clamping plate 800 x 100 mm, Demmeler system - Twin-station turntable - Active safety system for partition wall, turntable Euro - Energy supply for turntable - Actuator/sensor interface turntable - Flexible fixture holder turntable - Modular clamping system - Stand for modular clamping system incl. counterholder Extended Laser Equipment - TruDisk 4002 - Cooler for TruDisk 4002 - 30 m fiber optic cable Technology Package - Laser welding technology package - Motorized focus adjustment option - TeachLine option - Gas supply block for shielding gas Argon Laser Safety Cabin - Automatic sliding door Lsdpfx Ajy Sauljqverl - Video surveillance with camera

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection Ljdpfxoy Sanre Aqvjrl - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: new, functionality: fully functional, Year of construction: 2026, A mobile loading ramp with a load capacity of 8,000 kg is a professional and modern solution for logistics, industrial, and distribution companies that require an independent and flexible loading station. Thanks to its electric lifting and lowering system, it enables fast and safe connection between ground level and the loading surface of trailers, containers, and trucks – regardless of their height. It is an indispensable tool in locations without permanent loading infrastructure or where rapid adaptation to changing operational needs is required. Main Advantages of the Ramp 8,000 kg load capacity – safe handling of heavy loads and fully loaded forklifts. Electric lifting actuator – fast and effortless height adjustment of the ramp. Control panel – intuitive operation, mounted directly on the ramp structure. Anti-slip surface – ensures stable forklift movement in all conditions. Side safety rails and wheel locks – enhanced safety in the loading area. Mobility – easy relocation of the ramp using a forklift. Durable welded steel construction – resistant to deformation and intensive use. Construction and Technology The ramp has been designed for maximum strength, durability, and ease of operation. The structure, based on steel profiles and transverse reinforcements, allows forklifts to transport heavy goods without the risk of platform deformation. The anti-slip chequered steel plate covering the entire ramp surface ensures excellent traction even during rain, snow, or in the presence of industrial dirt and debris. The electric actuator enables safe, fast, and precise positioning of the ramp at the required height – from 1,100 mm to 1,650 mm. The entire control system is integrated into the ramp structure, eliminating the need for additional external devices and significantly speeding up preparation for operation. Precision and Operational Safety The ramp is equipped with wheel locks and a ground stabilization system, ensuring safety during operation even under maximum load. Mechanical side protections and properly profiled safety rails protect operators from accidentally slipping off the ramp during maneuvering. The rigidity of the entire structure eliminates the “bending” effect even during intensive use, ensuring smooth forklift movement across the ramp. Mobility and Flexibility Lrjdoy Sf N Ijpfx Aqvsl Standard Equipment Electric lifting actuator with control panel Anti-slip chequered steel plate along the entire ramp length Integrated wheels for easy ramp relocation Forklift transport hooks Side safety rails and mechanical protections Wheel locks and ramp stabilization system Specification Value Load Capacity 8,000 kg Total Length 11,450 mm Horizontal Section Length 2,950 mm Container Lip Length 450 mm Inclined Section Length 7,000 mm Folding Lip Length 750 mm Ramp Width 2,000 mm Overall Width 2,100 mm Minimum Height 1,100 mm Maximum Height 1,650 mm

Condition: excellent (used), High-quality automatic strapping machine STRAPEX SMA30 for sale, in very good technical condition and ready for operation. This machine is ideal for warehouse, logistics, production applications, as well as for the packaging of cartons, pallets, and various loads. ⸻ Technical specifications: • Model: STRAPEX SMA30 • Year of manufacture: 2021 • Strap width: 12 mm • Power supply: 230V (single phase) • Frequency: 50 Hz • Control voltage: 24V DC • Serial number: 121093031 ⸻ Equipment: • Side-mounted strap dispenser (large spool) • Electronic controls (tension and cycle adjustment) • Foot pedal actuator • Stainless steel worktable • Transport casters (mobile) • Emergency STOP button ⸻ Condition: The machine is in very good visual and technical condition. Fully functional, ready for immediate use. ⸻ Applications: • Warehousing • Logistics centers • Production facilities Lrjdpfoy Hxtijx Aqvel • Shipping/packaging operations • Securing cartons and parcels

Condition: used, empty load weight: 3,300 kg, maximum load weight: 14,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2008, next inspection (TÜV): 11/2026, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: BDF swap body trailer Multiple units in stock GALVANIZED Twin tires 235/75R17.5 Long air suspension bellows Lifting height 1390 mm Drum brakes Net unit price 3,950 EUR Many chassis and swap bodies in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO-COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING BY APPOINTMENT ONLY! ##### Lredpfx Aey Uba Ioqvel

Condition: new, empty load weight: 10,500 kg, maximum load weight: 29,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 pairs of wheel recesses with cover, ABS, air suspension with lifting and lowering function, axle load scales, total loading area length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated at 10 t, 40 lashing rings each rated at 3 t, loading ramps (approx. 3,100 x 760 mm), climbing strips on the outside of the ramps and at the rear slope, ramps can be laterally adjusted, wooden floor 68 mm thick, storage box with lid for lashing chains or straps, contour marking as per regulations, all-round warning beacon, spring-actuated parking brake, incl. axle load indicators, vehicle fully hot-dip galvanized, surcharge for hydraulic ramp adjustment = price: €1,000, -- Printing errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Ljdpfx Asy N Rytsqverl

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM FULL Manufacturing year 2026 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: Lrsdjd Tamdjpfx Aqvsl - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, warranty duration: 12 months, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM FULL Manufacturing year 2026 - brand new Lrodpjh D Rnhjfx Aqvsl TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish , English)

Condition: used, Year of construction: 1995, Gas burner with control cabinet. Simple operation via seavis display. Gas quality I2H EL heating oil quality Electro-hydraulic actuator: - Type: VK100 - Operating temperature: from -15 to 60 °C Additional title: oil and gas burner Heating capacity: 4500 kW Gaspressure: 100 mbar Power: 12,5 kW Voltage: 400 V Frequency: 50 Hz Length: 1,90 m Width: 1,10 m Height: 1,20 m Weight: 2500 kg Lsdpfxoxwza Ds Aqvsrl Features: electrical cabinet

Condition: excellent (used), Gericke PTA50 Pneumatic conveying system Lrjdpfx Asy Tbfnoqvel Stainless, Mobile pneumatic conveying and dosing system used in the food, chemical and pharma industries, working pressure 3.9Bar, volume 50L, with butterfly valve and actuator

Condition: ready for operation (used), Rexroth spindle / ball screw with R150357086 circulating ball nut SN: 173 + spindle block and bellows from Emag VSC200 DUO machine, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Lrjdjx Eq Nmopfx Aqvjl

Condition: ready for operation (used), Emag - Rexroth spindle / ballscrew assembly with R150357086 recirculating ball nut SN: 217 + spindle block and bellows from an Emag VSC200 DUO machine, used, in good condition, 100% operational, scope of delivery as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Ledpfx Aox Eq Ngjqverl