Used Belt Press Machine for sale (72,660)

Year of construction: 2026, condition: new, The PT-400 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 500 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 0.8 kW, 230 V Rcjdpfsfgl Hfex Airsh Dimensions L × W × H (mm): 1940 × 1000 × 1250 Weight: 500 kg Belt width: 400 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Juice pump

Condition: used, Year of construction: 2025, width of the strips 150 mm band length 2000 mm band speed 1400 / 2800 U/min tube diameter 40 - 140 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 360 kg. Exhibition machine - like NEW not yet in use (!!) New price approx. 6.500 euros Special price on request - Machine video - identical machine - Redpfow U U U Dex Airech ?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal & vertical grinding alignment possible - 1x set of grinding rollers included in delivery (Ø 76-90-114 mm) * other dimensions optionally available for an additional charge

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 220 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Rcjdexaatujpfx Airjh Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 45.0 mm band length 850 mm band speed 8.0 m/sek. Redpfx Ajxaanrjirsch voltage 230 V total power requirement 0.18 kW MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 300 mm band length 2070 mm band speed 7.0 m/sec surface of working table 750 x 380 mm diameter 87.7 Führungsrollen mm engine output 1.5 kW total power requirement 400 Volt weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm MADE IN GERMANY Furnishing : Rcjdpfoxaapiox Airoh - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg including machine base Furnishing: Rcsdpfx Aiexabaiereh - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel Rcodpfjxab Dzsx Airsh tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: excellent (used), Belt sander Make Karnasch Type ALMI AL 100 Rsdpfx Aijuf N Scerjch with 6 different contact rollers or sanding rollers Diameter : 17,5 - 20 - 22 - 28 - 38 - 48 mm belt width 100 mm length 2000 mm Grinding range for grinding diameter 20 - 76 mm

Condition: new, Package size: 5 pieces Holzprofi sanding belts, suitable for many different machines from all manufacturers! These top-quality sanding belts deliver excellent results when working with wood and various metals. Thanks to the fully synthetic resin-bonded, semi-open coating and the antistatic properties, they are particularly efficient and durable. Advantages: - High-quality sanding belts for professional use - Fully synthetic resin-bonded for long service life - Semi-open coating and antistatic for best sanding results - Extra-strong backing material for high resistance - Suitable for all types of wood and various metals High quality – Made in Austria! Areas of application: These belt sanding belts are ideal for carpenters, turners and DIY enthusiasts who need a reliable and powerful solution for their sanding work. The following lengths are available: 5900x150mm, suitable for Holzprofi Austria BS220, among others 6150x150mm, suitable for Holzprofi Austria BS220A, among others 6440x150mm, suitable for Holzprofi Austria BS250 and BS220B, among others 6800x150mm, suitable for Holzprofi Austria BS250A, among others 7000x150mm, suitable for Holzprofi Austria BS250B, among others Grit sizes: K40 K60 K80 K100 K120 K150 Rodpfx Aozq Dfpsirsch Prices from 12.00 euros Prices depend on length and design All other sizes are also possible! If you have any questions about the correct length for your machine, please contact us, we will be happy to help. Tel.: 00 43 7613 5600

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 400 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor Rjdoxaappspfx Airech - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 150 mm band length 2000 mm band speed 33 m/sec total power requirement 4 kW weight of the machine ca. 100 t dimensions of the machine ca. 1,2 x 0,5 x 0,85 m Belt sander with - Contact disc: 600 x 150 mm Rsdpfx Asupxl Ieirech

Condition: new, width of the strips 150 mm Rcsdeirwwpopfx Airoh band length 2000 mm band speed 30 - 34 m/sec total power requirement 4 kW weight of the machine ca. 100 Kg dimensions of the machine ca. 1,2 x 0,5 x 0,85 m

Condition: new, Year of construction: 2026, The CORMAK SM100 belt grinder is a professional stationary grinding machine designed for efficient and precise deburring, edge grinding, and machining of flat and profiled surfaces. Thanks to its two-speed drive system, robust construction, and ergonomic design, this metal belt grinder is an excellent solution for production plants, tool rooms, and metalworking workshops, ensuring repeatable results and long service life of abrasive materials. Main advantages of the machine Two-speed abrasive belt operation – belt speeds of 9.5 m/s and 19 m/s allow adjustment of parameters according to the material and type of operation (roughing/finishing). Powerful and reliable 1.5 kW motor – ensures smooth operation even under heavy load. Belt grinder with base – a stable construction provides comfortable and safe operation without transferring excessive vibrations to the operator. Precisely balanced rollers – eliminate vibrations, ensuring smooth belt movement and high-quality surface finishing. Quick belt replacement system – enables fast abrasive belt changes without the need for tools. Adjustable stops and guides – improve machining accuracy and allow adjustment to specific applications. Dust extraction port – enables connection to an extraction system, reducing airborne particles in the workplace. Undervoltage release safety switch (IP54) – provides protection in case of power failure. Design and technology The CORMAK SM100 metal belt grinder has been designed for maximum durability and safe operation. The body is made of thick-walled steel components, minimizing resonance and ensuring high structural rigidity. The open and easily accessible working area, combined with a large grinding surface, allows processing of workpieces with various dimensions. The compact base requires little space while providing stable support for the entire unit. Precision and working efficiency Thanks to the optimized two-speed transmission and high machine weight (44 kg), the CORMAK SM100 stationary belt grinder operates smoothly and with minimal vibration, even under significant pressure from the operator. The ability to select the grinding speed provides direct control over surface finish quality and the speed of material removal. Applications The machine is ideal for: steel structure processing, tool rooms and metalworking workshops, single-piece and small-batch production, finishing operations and surface preparation before painting, grinding welds, edges, flat surfaces, and profiled components. Standard equipment Belt grinder with two-speed transmission Stationary base Dust extraction port for connection to an extraction system Safety switch with undervoltage protection (IP54) Guide and drive rollers Technical specifications Parameter Value Rsdpjvvk Hhjfx Airech Power supply 400 V / 50 Hz Abrasive belt dimensions (L × W) 1220 × 100 mm Belt speeds 9.5 / 19 m/s Motor power 1.5 kW Weight 44 kg Overall dimensions (L × W × H) 720 × 400 × 990 mm Base dimensions 430 × 380 mm Height to support table 870 mm

Condition: new, Year of construction: 2026, The CORMAK SM150 belt grinder is an industrial metal belt sanding machine designed for intensive removal of excess material from large surfaces, edges, and weld seams. Equipped with a wide 150 mm abrasive belt and a two-speed belt drive system, the machine provides high working efficiency in metalworking shops, tool rooms, and maintenance departments. Its stable construction, powerful motor, and advanced ergonomics make it a reliable solution for precise and safe metal processing. Main advantages of the machine Wide abrasive belt 2000 × 150 mm – ideal for processing large workpieces and flat surfaces requiring uniform finishing. Two belt speeds: 15 / 30 m/s – allows adjustment of grinding speed according to the material and type of operation. Powerful 2.8 kW motor – maintains constant speed even under heavy pressure, ensuring high machining quality. Spring-loaded belt tensioning system – automatically maintains proper belt tension, eliminating the need for manual adjustment. Stable construction with a wide base – effectively reduces vibrations during operation, improving operator comfort and machining accuracy. Easy grinding angle adjustment – enables quick and convenient positioning of the belt in relation to the workpiece. Two dust extraction ports – provide efficient dust removal, improving workplace safety and cleanliness. Design and technology The CORMAK SM150 metal belt grinder has been built using reinforced high-rigidity steel components, ensuring stability and long-term reliability. The integrated dust extraction system and working area guards improve safety during operation. The adjustable grinding table and large belt contact surface (200 × 150 mm) allow convenient processing of workpieces with various shapes and dimensions. Precision and working efficiency Rcsdpfevu Uh Tex Aireh Thanks to its wide abrasive belt and high-power drive system, the CORMAK SM150 stationary belt grinder enables fast and precise surface preparation for further production stages, including painting, galvanizing, or welding. The two-speed operating mode provides full control over both rough grinding and finishing processes. Applications The machine is ideally suited for: grinding edges, weld seams, and large flat surfaces, processing structural steel, stainless steel, and aluminum, industrial workshops, service facilities, and metalworking shops, serial and individual production, preparing surfaces for protective coatings. Standard equipment Abrasive belt 2000 × 150 mm Eye protection guard Adjustable grinding table Dust extraction ports (2 pcs.) Graphite coating reducing friction Motor safety switch Belt tensioning roller Vibration-damping base Technical specifications Parameter Value Abrasive belt dimensions (L × W) 2000 × 150 mm Contact wheel surface (W × W) 200 × 150 mm Grinding area 150 × 575 mm Belt speed 15 / 30 m/s Motor power 2.8 kW / 400 V Machine dimensions (L × W × H) 1100 × 650 × 980 mm Weight 98 kg Warranty 12 months

Condition: new, Year of construction: 2026, The CORMAK PSM150 belt grinder is an advanced metal belt sanding machine designed for efficient and precise grinding of large flat surfaces as well as hard-to-reach welds close to the floor. Its construction has been optimized for ergonomics, stability, and ease of operation, making it an indispensable solution for professional industrial plants, metalworking workshops, and welding facilities. Rodpfx Aisvu Unmjrjch Main advantages of the machine High grinding efficiency – ideal for processing sheet metal, weld seams, and surfaces near the floor. Metal belt grinder with a large contact wheel 195 × 150 mm – provides a large contact area and stable operation. Adjustable depth stop – enables precise adjustment of grinding parameters to suit the workpiece. Large working surface 150 × 450 mm – effective finishing of large and flat components. Two belt speeds – 15 and 30 m/s – allows selection of the appropriate working speed depending on the application. Low machine weight (85 kg) – ensures mobility and easy transport within the facility. Design and technology The CORMAK PSM150 is a stationary belt grinder designed for sanding large and heavy components that cannot be processed on standard work tables due to their size. Its ergonomic design allows the operator to maneuver the machine directly over the workpiece. The drive roller and the 150 mm wide contact wheel enable efficient work on wide weld seams and surfaces. The adjustable working height range of 475–1240 mm allows the machine to be adapted to individual working conditions. Precision and working efficiency A 2.8 kW motor and a two-speed drive system ensure high grinding performance while maintaining precision. The CORMAK PSM150 metal belt grinder is suitable for processing components made of carbon steel, stainless steel, and aluminum. The stable construction minimizes vibrations, while the belt guidance system ensures accurate tracking along the entire working length. Applications The PSM150 model is an ideal solution for: welding shops and steel construction plants, manufacturers of railings, handrails, and large sheet metal components, companies involved in renovation and grinding of metal surfaces, maintenance and repair departments, stainless steel and aluminum processing facilities. Standard equipment Abrasive belt 2000 × 150 mm Contact wheel 195 × 150 mm Drive roller 195 × 150 mm Adjustable depth stop Stable construction with working height adjustment system Optional equipment Spare abrasive belts with different grit sizes Technical specifications Parameter Value Motor power 2.8 kW Contact wheel 195 × 150 mm Drive roller 195 × 150 mm Flat grinding area 150 × 450 mm Belt dimensions 2000 × 150 mm Belt speed 15 / 30 m/s Working height 475–1240 mm Weight 85 kg Package dimensions 750 × 1100 × 800 mm Power supply 400 V

Condition: good (used), Year of construction: 1999, Offer 22648 Technical data: - Sanding belt dimension approx. 2000 x 50 mm - grinding belt speed approx. 30 m/min - contact wheel B 50 / D 300 mm - drive wheel B 50 / D 200 mm - adjustable belt centering - drive 400 V / 2880 rpm / 5,5 kW Rcsdpfx Asp H Tvxeireh - space requirement approx. W 500 x H 1000 x D 1400 mm - weight approx. 80 kg

Condition: new, Technical data: Working width mm 1,350 Rsdpjhtuvrefx Airjch Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: used, Year of construction: 2025, tube diameter 16.0 - 90.0 mm width of the strips 100 mm band length 1250 mm grinding band dimension 100 x 1250 mm total power requirement 2.2 kW weight of the machine ca. 180 kg. range L-W-H 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use (!!) New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine Rodpfx Ajxab N Djirech - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm Rodpfxsycuype Airsch - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Condition: used, usedmake Löserbelt unit 1motor 1 / 1,4 kWspeed 2 speedssuction connection own suction 0,44 kWspace requirement approx. 1400 mm x 800 mm x 1700 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Rjdovwfwkjpfx Airsch

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm table-size 700 x 350 mm engine output 3.0 kW weight 250 kg range L-W-H 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - Rcedpfx Aiexab R Isroh ?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Rcjdpfxez St U Us Airoh Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools Rsdoz Suarspfx Airjch – Hardened pressure plate

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH Redpfjitvkusx Airoch 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: excellent (used), Year of construction: 2013, Ref:11118 . 2013 Schmedt Präleg & Präform Casing-in & Pressing Machines. For casing-in a variety of thin to thick books into flexible or hard cases. Special features:- • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks Working in conjunction with:- 2008 Schmedt Präform 2100 Pressing & Joint Forming Machine. For pressing a variety of thin to thick hard cover books immediately after casing-in. Suitable for single or assorted books, pressing & burning in the joint in a single operation. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Specification, PraForm 2100 Rcedpfozkgdzjx Airsh Book press with groove cutter. Maximum format: 420 x 520 x 100 mm Power supply: 230 V + compressed air.