Used Belt System for sale (9,853)

Condition: new, Year of construction: 2023, total length: 44,000 mm, total width: 1,000 mm, Empty weight: 37.000 kg Productivity: 1000 tph 1000x44400mm radial telescobic conveyor General Tech Spec of 150 Feet Radial Belt Conveyor Drive System Direct Accoupled Drive Drum 323* 12 mm rubber coated Lodpfjx D A S Uex Aansta Reducer Yılmaz KR Series-VOLT 50hz-380V Bed Type SNH Series Felt Cast Iron Bed with Over Lubrication Platform Single Sided Walkway on main belt Band Tape TS 542 Norm 4 Layers, 4/2,10mm Width Direction Roll 12 units Nominal Capacity 800-1000 tph Drive 2.5” Standard Kingpin Paint Acrylic Raised stockpile height 15 meters Lowered stockpile height 4,3 meters Belt widths: 1200mm(26 meters)-1000mm(22 meters) Stinger width 1000* 19000mm Radial Drive Eletrical Motor/Gearbox connected to wheels by chain Radial Move 5 degrees Belt Rear Mounted on static pivot Stockpile capacity at 270 degrees15m height 140900 metric tons Drum 323mm dia, anti material sticking Main Belt 2x22 kw Motor Gearbox Stinger Belt Conveyor 2x22 kw Motor Gearbox Radial Tires 8 pcs- 315*65*22,5 Chained to Motors Radial Drives 2 pcs 3 kw Motor Gearbox Total Power 95 kw Transport Weight 35 tons Transport Dimensions 4400x29300x3500mm Control Full Automatic remote controlled Automation component Siemens Radial Tyres Hydraulic Swing for erection Erection Hydraulic Jacks for elevation Scraper Available at main belt and receiving hopper Cleaning Both belts have cleaning scraper under drive drum Receiving Chute included Discharge Chute to stinger belt Included Impact rolls Included at receiving chute section Control panel LCD screen and piano panel for back-up With Polypole automatic piling software and Siemens PLS option Fast delivery, high,quality, economical

Condition: ready for operation (used), Year of construction: 2007, This Kundig Premium-2 1100-RE belt sander was manufactured in 2007. Ideal for woodworking, it features a robust design for consistent performance. Consider the opportunity to buy this Kundig Premium-2 1100-RE belt sander. Contact us for more information. Ltodpfx Aasx Nknqsnja Application Types Sanding

Condition: good (used), Virginio Nastri CBDM5 Waste Disposal Conveyor Made in Italy Working width: 50 cm, conveyor length: approximately 300 cm. Offcuts are discharged directly from the machine into a container. Ltodsx Nc Amepfx Aansa

Condition: excellent (used), CATALOGUE NUMBER 7768 TECHNICAL DATA - Max. workpiece width: 1100mm - Max. workpiece height: 180mm – From above: - Metal pressure roller - Unit – grooved rubber roller for calibration - Smooth, sliding rubber roller – From below: - Feed belt - Pneumatic belt oscillation with photo sensors - Electric table lifting - Two feed speed settings - Main motor: 15kW - Feed motor: 1.65kW - Operating pressure: 6–8 bar - Extraction outlet diameter: 200mm - Dimensions (L/W/H): 1700x2240x2020mm - Weight: 1652kg FEATURES – Italian manufacture – calibrating sanding machine – Unpainted – Used machine in very good condition Net price: 16,900 PLN Net price: 4,020 EUR (subject to EUR exchange rate 4.2) Ltodpfexliybsx Aansa (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Ltedpfx Aexq Aptoanoa

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, total length: 14,759 mm, total width: 7,014 mm, total height: 4,314 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, noise level: 85 dB, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. Ltodpfexlc H Uox Aanoa The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts Ljdsxqggcjpfx Aaneta All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 2300 mm Measurements depth 3850 mm Measurements height 2500 mm Machine weight 9200 kg This HEESEMANN LSM 8 belt sander was manufactured in 2002. It features a sanding width of 1300 mm and accommodates workpiece thickness from 3 to 80 mm. Equipped with a vacuum transport belt and variable feed speed of 5–25 m/min, it ensures efficient material handling and flexibility in sanding operations. Consider the opportunity to buy this HEESEMANN LSM 8 belt sander. Contact us for more information about this machine. Application Types Ltsdpfox D Dr Nox Aansa Sanding

Year of construction: 1999, condition: used, Type of fuel: Electric Power: 173 kW (235 HP) Empty weight: 15.000 kg Working width: 136 cm Current frequency: 50 Hz Voltage: 220/400 Ltodpfx Ajx Nxthoansa Auction item. Wood sanding machine in working condition. Sold as seen in the photos. Working width 1 360 mm., length is not limited.

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Ltsdpfx Aoxwyhteanea Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Storage location: Nattheim Lodpfx Aajvvki Neneta

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch Ltedpfx Aeudxcheanoa TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: ready for operation (used), Year of construction: 2002, This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine. Ltedox D Dp Ujpfx Aanea Application Types Sanding

Condition: excellent (used), Catalogue No.: 7810 TECHNICAL DATA max working width: 630 mm max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: metal feed-in slip roller unit metal slip roller unit metal slip roller *from below: Ltsdpfx Aasxwykbsnoa 2 metal slip rollers feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units – unpainted – very good condition – used sander Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) (Prices may fluctuate with significant currency changes)

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Lsdpsvvkkajfx Aanjta Storage location: Nattheim

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Ledpfjtwzyfsx Aansta Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: ready for operation (used), Year of construction: 2018, Main Drive Spindle motor power 11 kW This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Application Types Sanding Ljdpfx Asx Nr Sdoansta

Condition: excellent (used), CATALOG NUMBER 7854 Ltjdpfx Aasx Ngt Nonoa Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH Ltedpfxsitvkuo Aanja 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: ready for operation (used), Year of construction: 2011, operating hours: 960 h, Additional Equipment Thickness of the product to be processed, min/max: 8 / 200 mm Main Drive: Feed speed, min/max: 3.5 / 18 m/s // Feed motor power: 2.2 Kw (3 HP) // Vacuum motor power: 11 Kw (15 HP) Possibility to adjust the height of the grinding roller with the help of a thickness indicator Automatic stop of the sander in the event of an accident Automatic oscillation of the grinding belt with electronic control Direction of movement of the inclined belt is opposite to the feed of the workpiece Length of the bevel tape: 2620 mm // Width of the inclined belt: 1370 mm // Grinding roller diameter: 320 mm // Rubberized sanding roller hardness: 30 Sh // Speed of the inclined belt: up to 18 m/s Lsdpfx Aajx D Na Ssnsta Pneumatic switch for extremely precise positioning of the sanding roller Slanted belt blower with electronic oscillation // Electric motor power: 11 Kw (15 HP) Inverter for adjusting the speed of the sanding belt (from 3 to 18 m/s) This DMC MASTERBRUSH MB 1350 M4 woodworking machine was manufactured in 2011. It features a control computer with a 10.4'' LCD color touch screen, a vacuum motor power of 11 Kw, and a feed motor power of 2.2 Kw. The machine can handle product thicknesses from 8 to 200 mm and speeds up to 18 m/s. Ideal for precise woodworking tasks, the DMC MASTERBRUSH MB 1350 M4 machine we have for sale. Contact us for further details. Application Types Sanding

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers Ltedpfxex Ifgrj Aanoa - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: new, Technical data: Working width mm 1.350 Min./max. working height mm 4 - 170 grinding belt width/ length mm 1.370/ 2620 Main motor power kW 15,0 with inverter Feed speed variable m/min 3,5 - 18 Working aggregates: 1st unit: "RA" inclined ribbed steel contact roller diameter 160 mm 2nd aggregate: Combi: rubber coated grinding roller diameter 160 mm, 45 Sh Elastic electronic link sanding shoe "MESAR" with 24 segments Version C: - Elastic electronic sanding shoe "MESAR" complete with: - Pneumatic cylinder (On/Off) for the automatic on/off of the sanding roller sanding shoe unit - Activation of the sectors by the electronic control which synchronizes their insertion with the feed speed and controls the number of sectors according to the workpiece geometry. and allows the selection of more or less sectors on the left and on the right side of the workpiece. Versions 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar in the infeed. Other equipment: Roller table in infeed and outfeed for long workpieces Perforated table and transport carpet Vacuum table with electric fan 4 kW (5,5 PS ) integrated in machine frame Oscillating blow-off device 2nd unit Touch screen 10,4" screen with 'eye S software integration Ltsdpfshtuvrjx Aansa ATTENTION: PICTURES are EXAMPLE PICTURES OF A SIMILAR SD70!

Condition: excellent (used), Catalogue number 7717 TECHNICAL DATA - Workpiece length: 2780mm - Workpiece width: 800mm - Main motor: 4.2kW - Grinding belt width: 150mm - Right/left rotation - Electric table height adjustment (up/down) - Extraction nozzle diameter: 180mm - Overall dimensions (L/W/H): 4000x1520x1540mm - Weight: 637kg ADVANTAGES – Not repainted – Electric table adjustment – Used sander, in very good condition Ltedpjw Tii Tsfx Aanoa Net price: 9500 PLN Net price: 2260 euros depending on the exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Ltodov D H Sijpfx Aanoa Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Belt sander LANGZAUNER Type LZG Sanding table dimensions approx.: 2500 x 800 mm Sanding belt dimensions approx.: 6800 x 150 mm Motor power approx. 3.0 kW, 400 V, 50 Hz Ltodpfeuxnyusx Aanoa Motor protection switch Manual table height adjustment Right/left rotation of the sanding belt Sanding belt cover on top Light bar for the work area CE Incl. special sanding pad Incl. extraction fan NEW GRAPHITE CLOTH Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).